BMW Intake Parts for BMW A90 MKV Supra B58 3.0L

aFe Restore Kit for Pro5R Oiled Filters

T#:1943

Part#: 55-10460

In Stock

$ 21.00 USD

Add to Wish List

Qty

$ 21.00 USD

Add to Wish List

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

BMC Performance Air Filter - G20, Supra

T#:641644

Part#: FB01054

Back Ordered

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Pro Dry S Restore Kit

T#:18766692

Part#: 90-10601

In Stock

$ 21.00 USD

Add to Wish List

Qty

$ 21.00 USD

Add to Wish List

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

aFe Magnum FLOW Pro DRY S Air Filter - A90 Supra

T#:588597

Part#: 31-10296

In Stock

$ 97.00 USD

Add to Wish List

Qty

$ 97.00 USD

Add to Wish List

AFE Track Series Carbon Fiber Cold Air Intake System W/ Pro 5R Filter...

T#:5677368

Part#: 57-10017R

Ships in 3 Business Days

$ 750.00 USD

Add to Wish List

Qty

$ 750.00 USD

Add to Wish List

Features: Dyno-Proven Gains up to +26 HP & +27 Lbs. x Ft. TQ Outflows Factory Intake by 53% Measured Flow: 505 CFM @ 7” H20 Lightweight, 100% Carbon Fiber Intake Tube Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

VTT Single Piece Silicone Charge Pipe w/o BOV - B58

2X Entries Into Our F80 M3 Sweepstakes

T#:21209815

Part#: VTT-A90CP

Ships in 10 Business Days

Starting at $ 345.99 USD

Add to Wish List

Starting at $ 345.99 USD

Add to Wish List

6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. Another huge benefit is your vehicle goes from 4 connections to only TWO which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off. This means no more blown charge pipe connections on the track or road leaving you stranded. There are other options on the market, but they only address the problem in half measures. Some offer silicone connectors that are attached to hard pipes and are notorious for blowing, but they do nothing to address the heat soak issue or the number of connections needed. This kit solves ALL of those problems and does so at a lower cost. Install is very easy and takes about an hour if you are inexperienced with working on your own car, can take as little as 30-45 minutes if you have had it apart a few times. Dimensions for the pipes are as follows: Hot Side Pipe: 64mm or 2.50' on the connection to the turbo outlet opening up immediately to 77mm or 3' and remaining a FULL 3' to the throttle body inlet. Note: These will fit all aftermarket manifolds BMS has tested, some require slight trimming of the 3' end The kit includes: VTT Hot Side Silicone Charge pipe 2 VTT Branded CNC adapters to mount the map sensor, and Temp Probe 2 VTT Branded CNC adapters for the Turbocharger outlet, and TB inlet 2 VTT branded T-Bolt Clamps 2 1/8 NPT ports are included in the TB flange for methanol

Show More Show Less

Intake System

2X Entries Into Our F80 M3 Sweepstakes

T#:2928964

Part#: SUPRA-INT-1

Ships in 10 Business Days

$ 388.99 USD

Add to Wish List

Qty

$ 388.99 USD

Add to Wish List

VTT Carbon Fiber Airbox Lid & Filter Kit - G20, G29, A90 B58 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:29334009

Part#: VTT-G2X-CF-LID-1

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Enhance your engine bay's aesthetics with the sleek carbon fiber airbox lid from Vargas Turbo Technologies!

VTT rigorously tested the stock air intake on a dynamometer and found limited areas for enhancement. Drawing inspiration from BMW's design, VTT crafted a carbon fiber lid for the factory airbox.

Constructed entirely from 100% carbon fiber, this lid features an eight-layer design with a 1.3mm thick UV-resistant shell, ensuring long-lasting durability.

The included high-performance air filter, made from a high-flow cotton weave, comes pre-oiled to trap contaminants while maintaining optimal airflow.

Key Features:

50-state emissions compliant Simple, straightforward installation Stunning carbon fiber appearance Reusable high-performance air filter Easily reversible upgrade Transform your B58-equipped BMW with the Carbon Fiber Airbox Lid & Filter Kit from Vargas Turbo Technologies today!

Show More Show Less

aFe Magnum FLOW Pro 5R Air Filter - A90 Supra

T#:588596

Part#: 30-10296

Ships in 3 Business Days

$ 91.00 USD

Add to Wish List

Qty

$ 91.00 USD

Add to Wish List

VTT Single Piece Silicone Charge Pipe W/ BOV - B58

2X Entries Into Our F80 M3 Sweepstakes

T#:21209830

Part#: VTT-A90CPV

Ships in 10 Business Days

Starting at $ 397.99 USD

Add to Wish List

Starting at $ 397.99 USD

Add to Wish List

This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. Another huge benefit is your vehicle goes from 4 connections to only TWO which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off. This means no more blown charge pipe connections on the track or road leaving you stranded. There are other options on the market, but they only address the problem in half measures. Some offer silicone connectors that are attached to hard pipes and are notorious for blowing, but they do nothing to address the heat soak issue or the number of connections needed. This kit solves ALL of those problems and does so at a lower cost. Install is very easy and takes about an hour if you are inexperienced with working on your own car, can take as little as 30-45 minutes if you have had it apart a few times. Dimensions for the pipes are as follows: Hot Side Pipe: 64mm or 2.50' on the connection to the turbo outlet opening up immediately to 77mm or 3' and remaining a FULL 3' to the throttle body inlet. Note: These Pipes Will Fit All Aftermarket Manifolds We Have Tested, Some Require Slight Trimming Of The 3' End The kit includes: VTT Hot Side Silicone Charge pipe 2 VTT Branded CNC adapters to mount the map sensor, and Temp Probe 2 VTT Branded CNC adapters for the Turbocharger outlet, and TB inlet 2 VTT branded T-Bolt Clamps 2 1/8 NPT ports are included in the TB flange for methanol

Show More Show Less

Vargas Carbon Fiber Airbox Lid & Filter Kit - BMW G29 Z4, Toyota A90/...

2X Entries Into Our F80 M3 Sweepstakes

T#:51778121

Part#: VTT-SUPRA-CF-LID

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Elevate the performance and visual appeal of your B58-powered Supra or Z4 with the VTT Carbon Fiber Intake Lid and Filter system.

AFE Takeda Stage-2 Cold Air Intake System W/Pro 5R Filter

T#:5677369

Part#: 56-10015R

Ships in 3 Business Days

$ 387.00 USD

Add to Wish List

Qty

$ 387.00 USD

Add to Wish List

Feautures: Dyno-Proven Gains up to +26 HP & +27 Lbs. x Ft. TQ Outflows Factory Intake by 53% Measured Flow: 505 CFM @ 7” H20 Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

AFe Power Takeda Momentum Cold Air Intake System - Pro 5R Filter - To...

For 2021+ model years only

T#:3283357

Part#: 56-70050R

Back Ordered

$ 435.00 USD

Add to Wish List

Qty

$ 435.00 USD

Add to Wish List

DETAILS: Dyno-Proven Gains up to +14 HP & +22 Lbs. x Ft. TQ Outflows Factory Intake by 16% Measured Flow: 370 CFM @ 7” H20 Washable and Reusable Pro 5R Air Filter for Maximum Performance Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Five Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Toyota Strut Brace: The Takeda intake is designed to fit with the factory and aFe CONTROL strut brace, with no modifications necessary. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW A90 MKV Supra B58 3.0L

Sub-Categories

aFe Restore Kit for Pro5R Oiled Filters

BMC Filter Cleaning Kit

BMC Performance Air Filter - G20, Supra

Pro Dry S Restore Kit

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

aFe Magnum FLOW Pro DRY S Air Filter - A90 Supra

AFE Track Series Carbon Fiber Cold Air Intake System W/ Pro 5R Filter...

VTT Single Piece Silicone Charge Pipe w/o BOV - B58

Intake System

VTT Carbon Fiber Airbox Lid & Filter Kit - G20, G29, A90 B58 ...

aFe Magnum FLOW Pro 5R Air Filter - A90 Supra

VTT Single Piece Silicone Charge Pipe W/ BOV - B58

Vargas Carbon Fiber Airbox Lid & Filter Kit - BMW G29 Z4, Toyota A90/...

AFE Takeda Stage-2 Cold Air Intake System W/Pro 5R Filter

AFe Power Takeda Momentum Cold Air Intake System - Pro 5R Filter - To...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results