Home
Intake

BMW Intake Parts for BMW A90 MKV Supra B58 3.0L

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

BMW B46 B48 S58 MAP Sensor

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28138188

Part#: 13628637896

In Stock

Sale - Save 21% $ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 58.74 USD

Add to Wish List

Qty

Sale - Save 21%

$ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 58.74 USD

Add to Wish List

BMW B46 B48 S58 MAP Sensor

Looking to enhance the performance of your BMW B46, B48, or S58 engine? The BMW B46 B48 S58 MAP Sensor is the perfect solution. This MAP sensor ensures accurate measurement of manifold absolute pressure, optimizing engine performance and fuel efficiency. Crafted with precision engineering and high-quality materials, it offers the following benefits:

Ensures accurate measurement of manifold absolute pressure
Optimizes engine performance and fuel efficiency
Crafted with precision engineering for reliability
Compatible with BMW B46, B48, and S58 engines for easy installation

Show More Show Less

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

VTT Single Piece Silicone Charge Pipe w/o BOV - B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209815

Part#: VTT-A90CP

Ships in 10 Business Days

Starting at $ 345.99 USD

Add to Wish List

Starting at $ 345.99 USD

Add to Wish List

6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. Another huge benefit is your vehicle goes from 4 connections to only TWO which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off. This means no more blown charge pipe connections on the track or road leaving you stranded. There are other options on the market, but they only address the problem in half measures. Some offer silicone connectors that are attached to hard pipes and are notorious for blowing, but they do nothing to address the heat soak issue or the number of connections needed. This kit solves ALL of those problems and does so at a lower cost. Install is very easy and takes about an hour if you are inexperienced with working on your own car, can take as little as 30-45 minutes if you have had it apart a few times. Dimensions for the pipes are as follows: Hot Side Pipe: 64mm or 2.50' on the connection to the turbo outlet opening up immediately to 77mm or 3' and remaining a FULL 3' to the throttle body inlet. Note: These will fit all aftermarket manifolds BMS has tested, some require slight trimming of the 3' end The kit includes: VTT Hot Side Silicone Charge pipe 2 VTT Branded CNC adapters to mount the map sensor, and Temp Probe 2 VTT Branded CNC adapters for the Turbocharger outlet, and TB inlet 2 VTT branded T-Bolt Clamps 2 1/8 NPT ports are included in the TB flange for methanol

Show More Show Less

VTT Single Piece Silicone Charge Pipe W/ BOV - B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209830

Part#: VTT-A90CPV

Ships in 10 Business Days

Starting at $ 397.99 USD

Add to Wish List

Starting at $ 397.99 USD

Add to Wish List

This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. Another huge benefit is your vehicle goes from 4 connections to only TWO which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off. This means no more blown charge pipe connections on the track or road leaving you stranded. There are other options on the market, but they only address the problem in half measures. Some offer silicone connectors that are attached to hard pipes and are notorious for blowing, but they do nothing to address the heat soak issue or the number of connections needed. This kit solves ALL of those problems and does so at a lower cost. Install is very easy and takes about an hour if you are inexperienced with working on your own car, can take as little as 30-45 minutes if you have had it apart a few times. Dimensions for the pipes are as follows: Hot Side Pipe: 64mm or 2.50' on the connection to the turbo outlet opening up immediately to 77mm or 3' and remaining a FULL 3' to the throttle body inlet. Note: These Pipes Will Fit All Aftermarket Manifolds We Have Tested, Some Require Slight Trimming Of The 3' End The kit includes: VTT Hot Side Silicone Charge pipe 2 VTT Branded CNC adapters to mount the map sensor, and Temp Probe 2 VTT Branded CNC adapters for the Turbocharger outlet, and TB inlet 2 VTT branded T-Bolt Clamps 2 1/8 NPT ports are included in the TB flange for methanol

Show More Show Less

VTT Carbon Fiber Airbox Lid & Filter Kit - G20, G29, A90 B58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29334009

Part#: VTT-G2X-CF-LID-1

Ships on Jul 24, 2026

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Enhance your engine bay's aesthetics with the sleek carbon fiber airbox lid from Vargas Turbo Technologies!

VTT rigorously tested the stock air intake on a dynamometer and found limited areas for enhancement. Drawing inspiration from BMW's design, VTT crafted a carbon fiber lid for the factory airbox.

Constructed entirely from 100% carbon fiber, this lid features an eight-layer design with a 1.3mm thick UV-resistant shell, ensuring long-lasting durability.

The included high-performance air filter, made from a high-flow cotton weave, comes pre-oiled to trap contaminants while maintaining optimal airflow.

Key Features:

50-state emissions compliant Simple, straightforward installation Stunning carbon fiber appearance Reusable high-performance air filter Easily reversible upgrade Transform your B58-equipped BMW with the Carbon Fiber Airbox Lid & Filter Kit from Vargas Turbo Technologies today!

Show More Show Less