The all-new 2020-2023 Toyota GR Supra and the BMW Z4 equipped with the B58 3.0L turbo engine are beasts from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took these all-new rockets deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020-2023 Toyota GR Supra and BMW Z4 was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0" aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, the SP2300 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP2300 put down an impressive 15 additional horsepower and 17 pound-feet of tire-scorching torque! KEY FEATURES Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios – no additional tuning required Massive 4.00 6061-T6 aluminum intake tubing Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under-hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Available in Polished, Wrinkle Black, and Wrinkle Red Made in Pomona California, USA Injen Technology Limited Lifetime Warranty
Show More Show Less
From start to finish, each aspect of Injen Technology’s Evolution Cold Air Intake for the 2020-2023 Toyota GR Supra and the BMW Z4 M40i was a true labor of love. The sensuous body lines and athletic stance of these beasts required a Cold Air Intake designed to match this stunning work of art and the engineers at Injen Technology didn’t disappoint. The Injen EVO2300 has the cleanest installation on the market that seamlessly adapts to the engine compartment like a glove. Additionally, The Injen EVO2300 boasts the highest dyno-proven gains at a price point that just makes sense, the EVO2300 is a win on all levels. The Injen EVO2300 cold air intake system is truly on the next level. From the one-piece sealed housing that utilizes our patent pending Twist-Lock technology to securely attach a massive SuperNano-Web Dry air filter in place, to the seamless fitment to the OE inlet scoop, to our patented internal MR Technology that ensures maximum performance with zero risks of check engine lights, all the way down to premium hardware, Injen has put it all on the board to provide you with the best intake possible for your 2020-2023 Toyota GR Supra or BMW Z4! XLPE Roto-molded Housing: The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2300 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under-hood appearance. XLPE Roto-molded Intake Tube: The EVO2300 Evolution Air Intake System uses a custom-designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The specially tapered tube starts out at a huge 5 inches and slowly tapers down to 3.5 inches to ensure massive airflow at the turbo inlet. We have also incorporated our internal MegaRam (MR) technology for safe and effective power gains. Our intake tube also incorporates a custom CNC-Machined mounting flange that imitates the stock attachment method. This positive attachment method ensures that your intake remains securely attached to the turbo without fear of it slipping off like our competitor’s rubber couplers. SuperNano-Web Dry Air Filter: 'That’s massive!' is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO2300 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive-grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your 2020-2023 Toyota GR Supra or BMW Z4 equipped with the L6-3.0L Turbo. After hours of designing and dyno testing, Injen is proud to say that the EVO2300 Evolution Cold Air Intake system puts down numbers of up to 18 additional horsepower and 26 lb.-Ft. of torque. KEY FEATURES Dyno Proven Gains of up to 18 hp and 26 lb.-ft. of torque Specially designed intake tube that transitions from 5in OD to 3.5in to increase airflow velocity at the turbo inlet Custom CNC machined adapter imitates how the stock tube attaches to turbo, thus preventing rubber couplers from popping off like our competition Custom Heatshield in front of the turbo protects the intake from excessive heat soak Features Injen’s patented internal MegaRam (MR) Technology Designed to work with the stock calibration Aggressive under hood appearance while maintaining an OE fit Utilizes our patented Twist-Lock Filter attachment system Durable XLPE Roto-Molded Polyethylene tube and housing Reinforced automotive grade silicone couplers Fully serviceable Injen SuperNano-Web dry air filter Stainless steel band clamps with inner protective liner Aggressive under hood appearance while maintaining an OE fit Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances Made in Pomona California, USA Injen Technology Limited Lifetime Warranty
Show More Show Less
Take your B58-equipped G29 Z4 or A90 MKV Supra to the next level with this high-performance Injen SES charge pipe. Engineered to optimize airflow and power, these pipes are essential for unlocking your vehicle's full potential. Here's why they're a must-have: Manufactured from 2.75” Lightweight T6-6061 Aluminum Piping Oversized piping reduces restriction providing increased airflow to the engine Our aluminum piping replaces the brittle, failure-prone factory unit. Precision CNC machined quick connect flanges for an OE-Style attachment Includes one 1/8” Female NPT bung Available in Polished, Wrinkle Black, and Wrinkle Red finishes Seamlessly adapts with the OE Intercooler Precision CNC machined, and TIG-Welded sensor flanges included Stainless Steel Band Clamp with Inner Protective Liner Automotive Grade Silicone Couplers Unique CNC Machined Injen Logo Plate for a Refined Style Increase Throttle Response and Decreases Turbo Lag Beaded Tube Ends to Help Prevent Couplers from Coming Off Mandrel-bent Tubing for Increased Flow Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation Made in Pomona California, USA Injen Technology Limited Lifetime Warranty Crafted by Injen Technology, these intercooler pipes undergo extensive testing and refinement, delivering noticeable bolt-on power. Elevate your vehicle's performance today and feel the difference on the road.
Show More Show Less
The all-new 2020-2023 Toyota GR Supra and the BMW Z4 equipped with the B58 3.0L turbo engine are beasts from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took these all-new rockets deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020-2023 Toyota GR Supra and BMW Z4 was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0" aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, the SP2300 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP2300 put down an impressive 15 additional horsepower and 17 pound-feet of tire-scorching torque! KEY FEATURES Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios – no additional tuning required Massive 4.00 6061-T6 aluminum intake tubing Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under-hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Available in Polished, Wrinkle Black, and Wrinkle Red Made in Pomona California, USA Injen Technology Limited Lifetime Warranty
Show More Show Less
Take your B58-equipped G29 Z4 or A90 MKV Supra to the next level with this high-performance Injen SES charge pipe. Engineered to optimize airflow and power, these pipes are essential for unlocking your vehicle's full potential. Here's why they're a must-have: Manufactured from 2.75” Lightweight T6-6061 Aluminum Piping Oversized piping reduces restriction providing increased airflow to the engine Our aluminum piping replaces the brittle, failure-prone factory unit. Precision CNC machined quick connect flanges for an OE-Style attachment Includes one 1/8” Female NPT bung Available in Polished, Wrinkle Black, and Wrinkle Red finishes Seamlessly adapts with the OE Intercooler Precision CNC machined, and TIG-Welded sensor flanges included Stainless Steel Band Clamp with Inner Protective Liner Automotive Grade Silicone Couplers Unique CNC Machined Injen Logo Plate for a Refined Style Increase Throttle Response and Decreases Turbo Lag Beaded Tube Ends to Help Prevent Couplers from Coming Off Mandrel-bent Tubing for Increased Flow Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation Made in Pomona California, USA Injen Technology Limited Lifetime Warranty Crafted by Injen Technology, these intercooler pipes undergo extensive testing and refinement, delivering noticeable bolt-on power. Elevate your vehicle's performance today and feel the difference on the road.
Show More Show Less
The all-new 2020-2023 Toyota GR Supra and the BMW Z4 equipped with the B58 3.0L turbo engine are beasts from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took these all-new rockets deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020-2023 Toyota GR Supra and BMW Z4 was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0" aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, the SP2300 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP2300 put down an impressive 15 additional horsepower and 17 pound-feet of tire-scorching torque! KEY FEATURES Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios – no additional tuning required Massive 4.00 6061-T6 aluminum intake tubing Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under-hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Available in Polished, Wrinkle Black, and Wrinkle Red Made in Pomona California, USA Injen Technology Limited Lifetime Warranty
Show More Show Less
Take your B58-equipped G29 Z4 or A90 MKV Supra to the next level with this high-performance Injen SES charge pipe. Engineered to optimize airflow and power, these pipes are essential for unlocking your vehicle's full potential. Here's why they're a must-have: Manufactured from 2.75” Lightweight T6-6061 Aluminum Piping Oversized piping reduces restriction providing increased airflow to the engine Our aluminum piping replaces the brittle, failure-prone factory unit. Precision CNC machined quick connect flanges for an OE-Style attachment Includes one 1/8” Female NPT bung Available in Polished, Wrinkle Black, and Wrinkle Red finishes Seamlessly adapts with the OE Intercooler Precision CNC machined, and TIG-Welded sensor flanges included Stainless Steel Band Clamp with Inner Protective Liner Automotive Grade Silicone Couplers Unique CNC Machined Injen Logo Plate for a Refined Style Increase Throttle Response and Decreases Turbo Lag Beaded Tube Ends to Help Prevent Couplers from Coming Off Mandrel-bent Tubing for Increased Flow Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation Made in Pomona California, USA Injen Technology Limited Lifetime Warranty Crafted by Injen Technology, these intercooler pipes undergo extensive testing and refinement, delivering noticeable bolt-on power. Elevate your vehicle's performance today and feel the difference on the road.
Show More Show Less
