BMW X Series E83 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

OEM Mahle-Behr Thermostat - E82 E9X E60 X3 Z4 with N52 N54 engines ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mahle-Behr - Corporate Logo
T#:341203
Part#: 11537549476
In Stock
$ 135.99

This product was last offered at the strikethrough price on
06-03-2026

$ 108.99 USD
Free Shipping
$ 108.99 USD
Free Shipping
Engine running a little hot or is the temp gauge not telling you anything? The thermostat might be the likely problem. Many cooling issues start with the thermostat. This is electronically controlled by the engine computer based on the cooling demands from the engine. And cooling components are working harder than ever. Engine performance is also dependent on temperature - as temperatures rise and pass a certain threshold the engine computer will begin reducing power. Stay on top of your cooling maintenance by replacing critical components preventatively. This replacement thermostat fits many of the N51 N52 N53 N54 6 cylinder engines and is an OEM Behr part. 

The thermostat is located along with the water pump on the side of the engine. To gain access for removal you may need to remove the water pump as well. If the water pump is removed you MUST replace its mounting bolts. You can add them from the options below. We also have a bundled package that includes the water pump, mounting screws, connecting hose, and clamps if you want to replace everything together (recommended). 

This thermostat fits the following BMWs:
2008+  E82  BMW 128i 135i
2007+  E9X  BMW 325i 325xi 328i 328xi 330i 335i 335xi
2006+  E60  BMW 525i 525xi 528i 528xi 530i 530xi 535i 535xi
2006+  X3  BMW X3 3.0i X3 3.0si
2006+  Z4  BMW Z4 3.0i Z4 3.0si
Show More Show Less
Mahle-Behr Coolant Expansion Tank - E46, E53, E83
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mahle-Behr - Corporate Logo
T#:1735
Part#: 17117573781
In Stock at Vendor
$ 100.99

This product was last offered at the strikethrough price on
04-01-2026

$ 96.99 USD
Free Shipping on orders $49 and up
$ 96.99 USD
Free Shipping on orders $49 and up
This coolant reservoir is for the non-M E46 3-series models from 1999-2006 (M3 takes a different expansion tank). We have found that the expansion tanks should be replaced based on age as well as condition. Expansion tanks seem to have a lifespan of less than six years before they show signs of fatigue and wear. Pre-emptively replacing the expansion tank as part of an overall maintenance plan can prevent you from getting stranded from a sudden failure later on. This is the most recent expansion tank design from Hella-Behr, the OEM supplier to BMW. It replaces the original BMW part number 17137787039.

Other items to consider replacing at the same time are the radiator cap, coolant level sensor, lower radiator hose, coolant temp sensor in the lower hose, and the hose clamps. If your car has an automatic transmission you should also replace the oil cooler thermostat in the radiator frame, which is a common source for leaks.

This coolant expansion tank fits:

1999-2006 E46 3 series - 323i, 323Ci, 325i, 325Ci, 325xi, 328i, 328Ci, 330i, 330Ci & 330xi (**no M)
2004-2008 X3 SAV - X3 2.5, X3 3.0, X3 3.0si
2000-2005 X5 SAV - X5 3.0
Show More Show Less
OEM Mahle-Behr Thermostat - E39 E46 E60 E53 Z3 Z4 with M54, M52TU eng...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mahle-Behr - Corporate Logo
T#:341098
Part#: 11537509227
Ships in 1 Business Day
$ 103.81 USD
Free Shipping
$ 103.81 USD
Free Shipping

Replacement stock MAP thermostat with plastic housing and gasket for E46, E39, E60, X5, Z4 - M54 engine, M52TU engine. Your car may still operate fine according the instrument display but the electrically-operated thermostat may be going bad. This new thermostat includes the thermostat gasket, ready to install in your BMW.

Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

Applications:
1999-2003 E39 528i, 525i, 530i sedan, touring wagon (M52TU engine, M54 engine)
1999-2005 E46 323, 328, 325, 330 sedan, coupe, cabrio, touring wagon (M52TU engine, M54 engine)
2004-2005 E60 525i, 530i sedan, touring wagon (M54 engine)
2001-2006 E53 X5 3.0 (M54 engine)
2004-2006 E83 X3 2.5i X3 3.0i (M54 engine)
1999-2002 Z3 2.3. Z3 2.5i, 2.8 Z3 3.0i (M54 engine)
2003-2005 Z4 2.5i, Z4 3.0 (M54 engine)

Show More Show Less

Mahle-Behr Oil Cooler - Multiple BMWs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mahle-Behr - Corporate Logo
T#:591695
Part#: 11427525333
In Stock
$ 154.99

This product was last offered at the strikethrough price on
05-07-2026

$ 105.99 USD
Free Shipping
$ 105.99 USD
Free Shipping
Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55
Show More Show Less

Apex EC-7 19" Staggered Wheel Set - Race Silver
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:599071
Part#: EC71995ET28RSKT
Ships in 5 Business Days
$ 1,876.00 USD
$ 1,876.00 USD
Specifications: Color - Race Silver Size Front - 19x9.5" ET28 ​Size Rear - 19x10.5" ET45
APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 5 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
OEM Mahle-Behr Receiver Drier Canister - E38 E39 E46 E83 Z4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mahle-Behr - Corporate Logo
T#:375887
Part#: 64538377330
Ships in 1 Business Day
$ 55.53

This product was last offered at the strikethrough price on
04-13-2026

$ 55.46 USD
Free Shipping on orders $49 and up
$ 55.46 USD
Free Shipping on orders $49 and up

Removing water from your A/C refrigerant, driers are an important part to ensure a long life for all A/C components. OEM Mahle-Behr driers will eliminate all water and contaminants to help extend the life of your A/C system.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

OEM Mahle-Behr Air Conditioning Evaporator Assembly - E46 E83 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mahle-Behr - Corporate Logo
T#:376684
Part#: 64119135744
In Stock at Vendor
$ 398.99 USD
Free Shipping
$ 398.99 USD
Free Shipping

This is an OEM Mahle-Behr Air conditioning evaporator core for BMW E46 3 series and E83 X3's. The evaporator core is located inside the cabin under the dash. It helps to transfer the cool air from the compressor to the cabin. A leaking evaporator can cause poor A/C performance and cooling. Replace your faulty evaporator today with this OEM part. OEM Mahle-Behr replacement for BMW part # 64119135744.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

OEM Mahle-Behr Heater Core - E46 3 series, E83 X3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mahle-Behr - Corporate Logo
T#:377014
Part#: 64118372783
Ships in 1 day
$ 197.25 USD
Free Shipping
$ 197.25 USD
Free Shipping
This is the heater core for BMW E46 3 series and E83 X3. The heater radiator uses hot engine coolant passing through the core create heat to warm the cabin. The blower motor moves this heated air into the interior of the car. If a heater core develops a crack or leak, it is likely that moisture will condense on the inside of the windows and the smell of anti-freeze may be apparent. Made by Behr.

This item fits the following BMWs:
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2004-2010  E83 BMW  X3 2.5i X3 3.0i X3 3.0si
Show More Show Less
Mahle-Behr Automatic Transmission Thermostat - E83
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mahle-Behr - Corporate Logo
T#:379288
Part#: 17113438717
Ships on Jul 14, 2026
$ 67.99 USD
Free Shipping
$ 67.99 USD
Free Shipping
Located underneath the expansion tank
OEM Behr Coolant Expansion Tank Cap - E36 E46 E34 E39 E32 E38 E65 X3 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mahle-Behr - Corporate Logo
T#:2766
Part#: 17111742231
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
This radiator expansion tank cap is used most BMW's from 1991-2006. It is a common failure item. When this item fails, it cannot hold pressure which results in your BMW overheating. If you are overhauling your coolant system, now is the time to consider preventative replacing this cap. It is also referred to as the coolant reservoir cap.

Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1989-1995 E34 BMW 530i 535i 540i M5
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i 540i M5
1989-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
1990-1998 E31 BMW 840i 840ci 850i 850ci 850csi
2004-2011 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 30.0i X5 4.4i X5 4.6is X5 4.8is
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si M Roadster M Coupe
2000-2003 E52 BMW Z8 Z8 Alpina
2007+ E90 BMW 335i & 335xi
Show More Show Less


GSP Front Axle Assembly - Left - E83
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
GSP North America - Corporate Logo
T#:389715
Part#: NCV27514
In Stock
$ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.99 USD
Limited Qty Sale
Free Shipping
$ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.99 USD
Limited Qty Sale
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E83 BMW X3

Show More Show Less
APEX Wheels Metal Valve Stem - Black - BMW & MINI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593644
Part#: HW-OEM-VALVE-BK
Ships in 2 Business Days
$ 15.00 USD
Free Shipping on orders $49 and up
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593645
Part#: HW-OEM-VALVE-GM
Ships in 2 Business Days
$ 15.00 USD
Free Shipping
$ 15.00 USD
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less

APEX ARC-8 19x9.5" ET33 Satin Black Wheel 20.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201383
Part#: ARC81995ET33SMBK
Ships in 5 Business Days
$ 449.00 USD
$ 449.00 USD
19x9.5" ET33 APEX ARC-8 Wheel 20.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):20.5
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201374
Part#: EC719105ET22SMBK
Ships in 5 Business Days
$ 479.00 USD
Free Shipping
$ 479.00 USD
Free Shipping
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Solid Gloss Black BMW Center Caps - Priced Each
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
Ships in 9 Business Days
$ 9.99 USD
Free Shipping
$ 9.99 USD
Free Shipping

APEX Wheels Metal Valve Stem - Silver - BMW & MINI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593646
Part#: HW-OEM-VALVE-SV
Ships in 2 Business Days
$ 17.00 USD
Free Shipping
$ 17.00 USD
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201364
Part#: EC71995ET22AN
Ships in 5 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201376
Part#: EC719105ET22AN
Ships in 5 Business Days
$ 479.00 USD
$ 479.00 USD
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201371
Part#: EC71910ET25SMBK
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201357
Part#: EC71995ET43RS
Ships in 5 Business Days
$ 426.00 USD
Free Shipping
$ 426.00 USD
Free Shipping
19x9.5" ET43 APEX EC-7 Wheel 23lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):43
Weight (lbs):23
Profile:2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX EC-7 19x9.5" ET33 Silver Wheel 22.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201360
Part#: EC71995ET33RS
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less


APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201361
Part#: EC71995ET33AN
Back Ordered
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201359
Part#: EC71995ET33SMBK
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less