BMW X Series E83 (2004-2010)

BC Racing Rear Damping Adjustment Extenders - BR Type

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555864

Part#: DMP-EXT

Ships in 7 Business Days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - E83 X3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555817

Part#: I-71-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

6k Front & 12k Rear Spring Rate
S-Barrel front & S-Barrel rear springs
Valved specifically to spring style and rate
Aluminum and Rubber Front Mounts
Aluminum and Rubber Rear Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201373

Part#: EC71910ET25AN

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - E83 X3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:568067

Part#: I-71E-BR

Ships on Aug 19, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

Apex EC-7 19" Staggered Wheel Set - Race Silver

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:599071

Part#: EC71995ET28RSKT

Ships in 5 Business Days

$ 1,876.00 USD

Add to Wish List

Qty

$ 1,876.00 USD

Add to Wish List

Specifications: Color - Race Silver Size Front - 19x9.5" ET28 Size Rear - 19x10.5" ET45

APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201362

Part#: EC71995ET22SMBK

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201376

Part#: EC719105ET22AN

Ships in 5 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels Metal Valve Stem - Silver - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593646

Part#: HW-OEM-VALVE-SV

Ships in 2 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201371

Part#: EC71910ET25SMBK

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Solid Gloss Black BMW Center Caps - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 9 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201364

Part#: EC71995ET22AN

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201374

Part#: EC719105ET22SMBK

Ships in 5 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19x9.5" ET33 Satin Black Wheel 20.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201383

Part#: ARC81995ET33SMBK

Ships in 5 Business Days

Sale - Save 15% $ 449.00

This product was last offered at the strikethrough price on
06-29-2026

$ 381.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 449.00

This product was last offered at the strikethrough price on
06-29-2026

$ 381.65 USD

Add to Wish List

19x9.5" ET33 APEX ARC-8 Wheel 20.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	20.5
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593645

Part#: HW-OEM-VALVE-GM

Ships in 2 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

APEX Wheels Metal Valve Stem - Black - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593644

Part#: HW-OEM-VALVE-BK

Ships in 2 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201357

Part#: EC71995ET43RS

Ships in 5 Business Days

$ 426.00 USD

Add to Wish List

Qty

$ 426.00 USD

Add to Wish List

19x9.5" ET43 APEX EC-7 Wheel 23lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	43
Weight (lbs):	23
Profile:	2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET33 Silver Wheel 22.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201360

Part#: EC71995ET33RS

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201361

Part#: EC71995ET33AN

Back Ordered

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201359

Part#: EC71995ET33SMBK

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

BC Racing Rear Damping Adjustment Extenders - BR Type

BC Racing BR Series Coilover Suspension Kit - E83 X3

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

BC Racing BR Series Extreme Low Coilovers - E83 X3

Apex EC-7 19" Staggered Wheel Set - Race Silver

APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs

APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs

APEX Wheels Metal Valve Stem - Silver - BMW & MINI

APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs

APEX Solid Gloss Black BMW Center Caps - Priced Each

APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs

APEX ARC-8 19x9.5" ET33 Satin Black Wheel 20.5lbs

APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI

APEX Wheels Metal Valve Stem - Black - BMW & MINI

APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs

APEX EC-7 19x9.5" ET33 Silver Wheel 22.5lbs

APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs

APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results