Oil Separation & Breather System for BMW X Series E83 (2004-2010)

Clear BMW chassis

Every car has a crankcase vent system that is supposed to suppress oil from making it into the intake ports and combustion chamber. A good functioning system will separate oil from the atmosphere and return it to the oil pan (or collect it in a catch can) while allowing the leftover vapors to burn in the combustion chamber or recirculate through the system. This has always been known as a PCV system (Positive Crankcase Ventilation) but BMW has several other names for it - oil separator, crankcase vent (CCV), and cyclonic separator. Failures in the system will allow raw oil to enter the intake and eventually into the engine itself which can have disastrous effects on engine performance and longevity. As emissions regulations on oil and gas venting have gotten more stringent the PCV systems have gotten more complex and failure prone. And because the CCV is intertwined with other systems you could experience rough running, loss of power, higher oil consumption, misfiring, stalling, or other annoying issues. There is no replacement interval for these so we recommend inspecting your crankcase vent system as part of your regular maintenance routines. Symptoms of a bad crankcase vent are: whitish or yellowish film on the underside of the oil cap, whistling/squealing noises (not caused by a belt), suction on the oil cap that makes it hard to unscrew, large amounts of white smoke from the exhaust, and excessive oil consumption.

Sub-Categories

CCV/PCV Breather Hoses (3)

Sort By:

Crankcase Oil Separator Repair Kit - E83 X3 2.5i 3.0i 2004-2006 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:2898

Part#: 11617533400-E83

Ships in 1-2 days

$ 400.21

This product was last offered at the strikethrough price on
08-13-2026

$ 359.76 USD

Add to Wish List

Qty

$ 359.76 USD

Add to Wish List

This Crankcase Vent / Oil Separator Repair Kit includes the updated oil separator valve, oil dipstick guide tube and hoses. Suitable for cold weather applications. This kit fits E83 X3 2.5i X3 3.0i 2004-2006.

This item fits the following BMWs:
2004-2006 E83 BMW X3 2.5i X3 3.0i

Show More Show Less

Bremmen Crankcase Vent Hose - E60 E70 E82/88 E9X N52 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:640155

Part#: 11157559528

In Stock

Sale - Save 20% $ 48.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.16 USD

Add to Wish List

Qty

Sale - Save 20%

$ 48.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.16 USD

Add to Wish List

This valve cover vent hose helps to vent the crankcase fumes on BMW's with the N51 / N52 6 cylinder engines. If replacing the valve cover, we recommend purchasing this item as well as it often will break while removing it from the valve cover.

Show More Show Less

Bremmen Oil Separator Kit - Level 1 - E39 E46 E83 Z3 Z4

10X Entries Into Our F80 M3 Sweepstakes

T#:641646

Part#: 11617501566S1

Ships in 6 Business Days

Sale - Save 15% $ 95.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.59 USD

Add to Wish List

Qty

Sale - Save 15%

$ 95.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.59 USD

Add to Wish List

BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace all the components of the oil separator system together to prevent damage to all the aspects of your engine. Level 1 kit includes the following; Oil separator Hose from oil separator to dipstick tube Hose from oil separator to valve cover Hose from intake manifold back to the connector hose Hose from oil separator up to the intake manifold

Show More Show Less

ECS Tuning Baffled Oil Catch Can - 8oz

10X Entries Into Our F80 M3 Sweepstakes

T#:13496655

Part#: 003779ECS05-02

In Stock

Sale - Save 10% $ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 215.09 USD

Add to Wish List

Qty

Sale - Save 10%

$ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 215.09 USD

Add to Wish List

Upgrade Your BMW with ECS Baffled Oil Catch Can

Modern emission regulations require a closed PCV/Breather system for cleaner operation. However, inefficient oil particle capture can lead to excessive oil vapor ingestion, causing carbon buildup, reduced performance, and fuel economy. ECS Tuning's updated ECS Baffled Oil Catch Can, now with an easy-to-empty 1/4" drain fitting, is engineered to collect toxic blow-by gases, minimize carbon deposits, and reduce oil contamination within engine oil. Recirculating oil vapor ensures emissions compliance without venting to the atmosphere.

Key Features:
Highly Efficient Oil Separator: Strategically positioned 4 chamber baffle system maximizes oil/air separation and minimizes oil droplets in the intake tract.
Integrated Dipstick: Knurled and black anodized oil dipstick simplifies oil volume inspection.
Reservoir: Available in 6oz or 8oz capacity with a 1/4" NPT drain plug fitting.
Serviceable: Easily removable baffle plates and drain plug for cleaning.
Easy/Customizable Installation: Combine with the ECS Universal Bracket Kit for simplified installation and adjustable mounting locations.
Leak-Free Fittings: Machined -10AN ORB (O-Ring Boss) fittings available for secure connections (fittings sold separately).

Show More Show Less