BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
GSP North America - Corporate Logo
T#:389683
Part#: 274125
Ships in 2 Business Days
$ 72.99 USD
Free Shipping on orders $49 and up

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

1992-1998 E36 BMW 318i 318ic 318is 318ti 323is 323ic 325i 325ic 325is 328i 328ic 328is M3 M3 Convertible 
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci 
3/1991-1995 E34 BMW 525i 530i 535i 540i 
11/1991-1994 E32 BMW 735i 735il 740o 740il 750il 
3/1992-1999 E31 BMW 840ci 850ci 850csi 
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less
Black Forest Industries - Corporate Logo
T#:31158762
Part#: WBFI77-E88-501
Ships in 2 Business Days
$ 229.99 USD
Free Shipping on orders $49 and up

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

  • Provide a polished, high-quality look by covering the open center hole
  • Are machined from 6061-T5611 aluminum for superior strength and durability
  • Feature a hand-brushed finish for a seamless OEM appearance
  • Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
  • Are sold in sets of four, with center caps not included
Show More Show Less

Sunex - Corporate Logo
T#:391150
Part#: SUU884506
In Stock
9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
3/8" drive socket with 5/8" opening for most spark plugs

Black Forest Industries - Corporate Logo
T#:391722
Part#: GS2B
In Stock
Starting at $ 184.99 USD
Free Shipping
Starting at $ 184.99 USD
Free Shipping

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813275
Part#: GS2-BMA-1S
Ships on Aug 17, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813277
Part#: GS2-BMA-1SUF
Ships on Aug 17, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 6 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
Complete set of spark plug sockets.

Black Forest Industries - Corporate Logo
T#:4813272
Part#: GS2-BMA-1
Ships on Aug 17, 2026
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813276
Part#: GS2-BMA-1SU
Ships on Aug 17, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
KMAC - Corporate Logo
T#:582353
Part#: 192026G
In Stock
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Sunex - Corporate Logo
T#:5229449
Part#: 224UMD
Ships on Aug 17, 2026
$ 29.99 USD
Free Shipping on orders $49 and up
Deep Impact Socket on a swivel.


Sunex - Corporate Logo
T#:2528135
Part#: 3301D
Ships on Aug 17, 2026
5% off MSRP $ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD
Free Shipping on orders $49 and up
Designed for impact use
Sunex - Corporate Logo
T#:5269512
Part#: 3670SED
Ships on Aug 17, 2026
$ 65.99 USD
Free Shipping on orders $49 and up
CR-MO alloy steel for long life
Sunex - Corporate Logo
T#:642035
Part#: 9914A
Ships on Aug 17, 2026
$ 113.91 USD
Free Shipping
$ 113.91 USD
Free Shipping
Radius V-Groove design creates an anti-slip while also preventing round-off.

KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Sunex - Corporate Logo
T#:385986
Part#: 6602LPD
Back Ordered
$ 704.99 USD
$ 704.99 USD
Designed to reach far under your vehicle with this long and low chassis

Black Forest Industries - Corporate Logo
T#:4813279
Part#: GS2-BMA-1SRC
Back Ordered
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Sunex - Corporate Logo
T#:5269518
Part#: 367132D
In Stock
6% off MSRP $ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up
Make oil filter housing removal simple

Black Forest Industries - Corporate Logo
T#:4813278
Part#: GS2-BMA-1SRU
Ships on Aug 17, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813281
Part#: GS2-BMA-1RC
Ships on Aug 17, 2026
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
HJS - Corporate Logo
T#:388461
Part#: 18111723379
In Stock
$ 10.99 USD
Free Shipping on orders $49 and up
Seals the mid-pipe to the muffler
Black Forest Industries - Corporate Logo
T#:4813273
Part#: GS2-BMA-1U
Ships on Aug 17, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less


Black Forest Industries - Corporate Logo
T#:4813274
Part#: GS2-BMA-1UF
Ships on Aug 17, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813280
Part#: GS2-BMA-1RU
Ships on Aug 17, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Sunex - Corporate Logo
T#:386187
Part#: 1006D
Ships in 6 Business Days
$ 306.99 USD
$ 306.99 USD
These jack stands have steel base pads for superior stability

Sunex - Corporate Logo
T#:385984
Part#: 6603ASJD
Ships in 6 Business Days
$ 720.99 USD
$ 720.99 USD
Need a light weight(under 60 Lbs) and heavy duty floor jack? This is the one for you

Black Forest Industries - Corporate Logo
T#:50899204
Part#: BFI-906-LUG
Ships on Aug 17, 2026
New Item
$ 4.99 USD
Free Shipping on orders $49 and up
Specifically engineered for vehicles utilizing a wheel stud conversion.
Black Forest Industries - Corporate Logo
T#:50934269
Part#: BFI-BMW-TRANS-01
Ships on Aug 17, 2026
New Item
$ 69.99 USD
Free Shipping on orders $49 and up
This kit is a "must-have" for any E36, E46, or E9X owner looking to tighten up their drivetrain's foundation and ensure long-term mechanical reliability.

Black Forest Industries - Corporate Logo
T#:50934264
Part#: BFI-BMW-90-01
Ships on Aug 17, 2026
New Item
$ 199.99 USD
Free Shipping on orders $49 and up
Eliminate the "drive-line slop" common in the E36 and E46 chassis with this Stage 1 Engine Mount kit.
Sunex - Corporate Logo
T#:2528142
Part#: SX113D
Ships on Aug 17, 2026
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
With great comfort and design the air ratchet wrench is the perfect tool

Sunex - Corporate Logo
T#:2528137
Part#: 9710MD
Ships on Aug 17, 2026
$ 31.99 USD
Free Shipping on orders $49 and up
Great for lines hoses with nuts and offset nuts.

Sunex - Corporate Logo
T#:5229429
Part#: 910MTAS
Ships on Aug 17, 2026
$ 154.99 USD
Free Shipping
$ 154.99 USD
Free Shipping
Used with a torque wrench to access obstructed fasteners
Sunex - Corporate Logo
T#:5269496
Part#: 9704
Ships on Aug 17, 2026
5% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up
Made of heat treated alloy steel
Sunex - Corporate Logo
T#:5229434
Part#: 3930
Ships on Aug 17, 2026
$ 83.99 USD
Free Shipping on orders $49 and up
An all inclusive brake piston retractor set


Sunex - Corporate Logo
T#:2706159
Part#: 426MDD
Ships on Aug 17, 2026
$ 15.99 USD
Free Shipping on orders $49 and up
Throw this thin wall impact on for whatever you need!
Sunex - Corporate Logo
T#:5269515
Part#: 3670S
Ships on Aug 17, 2026
$ 62.99 USD
Free Shipping on orders $49 and up
CR-MO alloy steel for long life
Sunex - Corporate Logo
T#:1793488
Part#: 1006C
Ships on Aug 17, 2026
$ 186.99 USD
$ 186.99 USD
Used in pairs for supporting automotive vehicles after lifting

Sunex - Corporate Logo
T#:2706156
Part#: 418MZTD
Ships on Aug 17, 2026
$ 10.99 USD
Free Shipping on orders $49 and up
Throw this thin wall impact for whatever you need!

Sunex - Corporate Logo
T#:2528144
Part#: 9726D
Ships on Aug 17, 2026
15% off MSRP $ 68.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.80 USD
Free Shipping on orders $49 and up
15% off MSRP
$ 68.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.80 USD
Free Shipping on orders $49 and up
Keep this great tool set near by and ready to use.
Sunex - Corporate Logo
T#:2706153
Part#: 2505WD
Ships on Aug 17, 2026
20% off MSRP $ 19.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 19.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up
Forged from the finest chrome-molybdenum alloy steel, the best choice for strength

Sunex - Corporate Logo
T#:2750699
Part#: 9914MA
Ships on Aug 17, 2026
$ 107.39 USD
Free Shipping
$ 107.39 USD
Free Shipping
Fully polished drop forged CR-V alloy steel for maximum strength and service life
Sunex - Corporate Logo
T#:2498418
Part#: 3911D
Ships on Aug 17, 2026
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
This set covers 8 different functions

Sunex - Corporate Logo
T#:5282862
Part#: 2850
Ships on Aug 17, 2026
11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
11% off MSRP
$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models

Sunex - Corporate Logo
T#:1046638
Part#: 1003C
Ships on Aug 17, 2026
$ 103.99 USD
Free Shipping on orders $49 and up
Use these large base ratcheting jack stands for a very stable base
Sunex - Corporate Logo
T#:5229461
Part#: 20250
Ships on Aug 17, 2026
$ 218.99 USD
Free Shipping on orders $49 and up
Accurate to ±3% clockwise and ±6% counterclockwise
Sunex - Corporate Logo
T#:34885399
Part#: 6809A
Ships on Aug 17, 2026
$ 227.99 USD
$ 227.99 USD


HJS - Corporate Logo
T#:17937421
Part#: 18211704198
Back Ordered
$ 17.99

This product was last offered at the strikethrough price on
05-07-2026

$ 16.99 USD
Free Shipping on orders $49 and up
$ 16.99 USD
Free Shipping on orders $49 and up
Fix your sagging or broken rear exhaust hanger to make sure your tailpipes are sitting correctly in your rear diffuser. 2 required per vehicle for E38, 4 for Z3m, and 6 for Z8! Broken or sagging exhaust hangers can lead to much larger issues such as premature failure of the flex joints, pulling on the o2 sensor wires and overall much more expensive components needing to be replaced. The HJS exhaust hangers a premium and price conscious alternative to this specific exhaust hanger found on just the Z3M, E38 and Z8's.
Show More Show Less