BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
Ships on Jul 6, 2026
$ 380.00 USD
Free Shipping
Add to Wish List
$ 380.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Active Autowerke Rotrex Traction Fluid - One Liter
Active Autowerke Rotrex Traction Fluid - One Liter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 3 Business Days
$ 240.00 USD
Free Shipping
Add to Wish List
$ 240.00 USD
Free Shipping
Add to Wish List
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less
GSP Front Wheel bearing & hub assembly - E31, E32, E34, E36, E46, Z3, Z4
GSP Front Wheel bearing & hub assembly - E31, E32, E34, E36, E46, Z3,...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
GSP North America - Corporate Logo
T#:389683
Part#: 274125
Ships in 2 Business Days
$ 72.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 72.99 USD
Free Shipping on orders $49 and up
Add to Wish List

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

1992-1998 E36 BMW 318i 318ic 318is 318ti 323is 323ic 325i 325ic 325is 328i 328ic 328is M3 M3 Convertible 
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci 
3/1991-1995 E34 BMW 525i 530i 535i 540i 
11/1991-1994 E32 BMW 735i 735il 740o 740il 750il 
3/1992-1999 E31 BMW 840ci 850ci 850csi 
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less
Active Autowerke Signature Trunk Emblem
Active Autowerke Signature Trunk Emblem
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Add to Wish List
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Add to Wish List
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less
Adjustable Rear Camber/Toe Bushings
Adjustable Rear Camber/Toe Bushings
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:582353
Part#: 192026G
Ships in 8 Business Days
$ 320.00 USD
Free Shipping
Add to Wish List
$ 320.00 USD
Free Shipping
Add to Wish List
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Shipping