BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Condor Speed Shop - Corporate Logo
T#:577554
Part#: SPGPAD
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Designed to replace the stock rubber pads. Use them to adjust the ride height on the rear of your e30, e36 318ti or z3. Each set includes 3 pairs of pads of varying thickness (3.5mm, 5mm & 6mm). Use the thinnest pad for the lowest setting, or stack all 3 to raise the rear almost 15mm.
Show More Show Less
Condor Speed Shop - Corporate Logo
T#:578193
Part#: DIFSTKT-1
In Stock
$ 32.00 USD
Free Shipping on orders $49 and up
Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts
Show More Show Less
Condor Speed Shop - Corporate Logo
T#:577574
Part#: PSDUALU
Ships in 2 Business Days
$ 40.99 USD
Free Shipping on orders $49 and up
Condor was the first to bring the power steering delete to the market. Don't settle for reproductions. A simple yet effective way to remove your power steering and loop the steering rack, allowing fluid and air to continually circulate within. their popular power-steering delete is machined from a solid block of aluminum. If you've already removed your power steering, this is a great way to stop any unwanted leaks from the "hose mod". The reason you need a power-steering delete that actually loops the two banjo bolts is to not only to let any residual fluid pass from one side of the rack to the other but also to let the air inside flow freely from one side to the other. Without this pass-through, you will be compressing the air inside of your rack on each side when you turn the wheel, making it harder to steer, and eventually blowing out the seals. Condor's deletes work better because they have two passages allowing the fluid/air to flow freely. Installation is simple. You will need to remove the stock reservoir, power steering pump, and all hoses. Keep the stock banjo bolts and use our new washers to bolt it into place. Pros: Tighter more responsive steering. Better road feel/feedback Cons: Harder steering at speeds below 15mph Includes: Aluminum Power steering Delete 4 new washers Works with: 6/1986-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix M3 1990-1991 E30 BMW 318i 318is 318ic 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i M3 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster 1997 - 2006 E46 BMW 316i 318i 318ci 320i 320ci 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 2004 - 2013 E90/E91/E92/E93 BMW 316i 318i 320i 320si 323i 325i 328i 330i 335i 335is M3 2006 - 2008 Z4 BMW M Roadster only
Show More Show Less

Condor Speed Shop - Corporate Logo
T#:578349
Part#: ADJRTAB
Ships in 4 Business Days
$ 209.99 USD
Free Shipping
$ 209.99 USD
Free Shipping
Designed specifically for those of you who prefer not to weld in toe and camber adjustment plates. If you have a lowered or track prepped BMW then you need this adjustable bushing kit. Condor's bushings feature in-car adjustability for camber and toe of up to +/- 1 degree. Their simple design allows for easy and accurate adjustment using the included stainless steel spanner wrench. Once adjusted, trailing arm bolts lock down the CNC machined center cores firmly in place. Condor's UHMW bushings and hard-coat anodized aluminum center cores will stiffen the rear trailing arms while giving you the benefit of adjustable suspension geometry.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:31158762
Part#: WBFI77-E88-501
Ships in 3 Business Days
$ 229.99 USD
Free Shipping on orders $49 and up

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

  • Provide a polished, high-quality look by covering the open center hole
  • Are machined from 6061-T5611 aluminum for superior strength and durability
  • Feature a hand-brushed finish for a seamless OEM appearance
  • Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
  • Are sold in sets of four, with center caps not included
Show More Show Less
Condor Speed Shop - Corporate Logo
T#:577555
Part#: SPALMC
In Stock
$ 66.00

This product was last offered at the strikethrough price on
06-01-2026

$ 62.99 USD
Limited Qty Sale
Free Shipping
$ 66.00

This product was last offered at the strikethrough price on
06-01-2026

$ 62.99 USD
Limited Qty Sale
Free Shipping
Stainless steel brackets for mounting a 16" SPAL fan on an OEM or aftermarket BMW radiator. The fan can be mounted on either side of the radiator. All mounting hardware is included. Fitment: e30, E36, E46
Show More Show Less

Black Forest Industries - Corporate Logo
T#:391722
Part#: GS2B
In Stock
Starting at $ 184.99 USD
Free Shipping
Starting at $ 184.99 USD
Free Shipping

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813272
Part#: GS2-BMA-1
Ships on Aug 12, 2026
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813277
Part#: GS2-BMA-1SUF
Ships on Aug 12, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Condor Speed Shop - Corporate Logo
T#:587122
Part#: DIFE30
Ships in 3 Business Days
$ 55.00 USD
Free Shipping on orders $49 and up
Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813276
Part#: GS2-BMA-1SU
Ships on Aug 12, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813275
Part#: GS2-BMA-1S
Ships on Aug 12, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less


Black Forest Industries - Corporate Logo
T#:4813279
Part#: GS2-BMA-1SRC
Back Ordered
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813274
Part#: GS2-BMA-1UF
Ships on Aug 12, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813278
Part#: GS2-BMA-1SRU
Ships on Aug 12, 2026
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Condor Speed Shop - Corporate Logo
T#:577943
Part#: E36HS
Ships in 5 Business Days
$ 18.99 USD
Free Shipping on orders $49 and up
Condor's Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat and up to 450 degrees F of direct heat. The extra protection of the heat sleeves is a perfect fit for street cars, track cars, and other high heat applications. Their mounts withstand temperatures up to 180 degrees F and do not need any heat protection during regular usage, but we recommend the extra protection of their sleeves for all vehicles with high underhood heat temperatures such as turbo and supercharged vehicles. Condor heat sleeves can be easily installed by simply slipping the sleeve around the engine mount and securing using the Velcro tabs. *LISTING IS FOR ONE HEAT SHIELD **Heat sleeve fitment is for Condor Engine Mounts only.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813273
Part#: GS2-BMA-1U
Ships on Aug 12, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Black Forest Industries - Corporate Logo
T#:4813281
Part#: GS2-BMA-1RC
Ships on Aug 12, 2026
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less

Black Forest Industries - Corporate Logo
T#:4813280
Part#: GS2-BMA-1RU
Ships on Aug 12, 2026
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Introducing the world's first Black Forest Industries shift knob specifically for Automatic transmission BMW applications. Built with the same quality materials as our other GS2 shift knobs, this application adds a control lever and internal springs to operate the automatic mechanism of a BMW shift lever.
Show More Show Less
Condor Speed Shop - Corporate Logo
T#:578345
Part#: BKCLTCH
Ships in 2 Business Days
$ 20.00 USD
Free Shipping on orders $49 and up
These Solid Delrin brake or clutch pedal bushings get rid of that annoying side to side sloppy play in your BMW's worn out pedals

Black Forest Industries - Corporate Logo
T#:50934269
Part#: BFI-BMW-TRANS-01
Ships on Aug 12, 2026
New Item
$ 69.99 USD
Free Shipping on orders $49 and up
This kit is a "must-have" for any E36, E46, or E9X owner looking to tighten up their drivetrain's foundation and ensure long-term mechanical reliability.

Black Forest Industries - Corporate Logo
T#:50934264
Part#: BFI-BMW-90-01
Ships on Aug 12, 2026
New Item
$ 199.99 USD
Free Shipping on orders $49 and up
Eliminate the "drive-line slop" common in the E36 and E46 chassis with this Stage 1 Engine Mount kit.
Black Forest Industries - Corporate Logo
T#:50899204
Part#: BFI-906-LUG
Ships on Aug 12, 2026
New Item
$ 4.99 USD
Free Shipping on orders $49 and up
Specifically engineered for vehicles utilizing a wheel stud conversion.