Home
Engine Parts
Internal Engine

BMW Internal Engine Parts for BMW Z3 (1996-2002)

Clear BMW chassis

Rebuilding your engine or giving your cylinder head an overhaul? Internal engine components covers parts that are located within the engine block and cylinder head. Examples include: timing chains and tensioners, rocker arms, rod bolts and studs, head bolts, valve springs, connecting rods, and more. These are Genuine BMW engine parts, performance upgrades, or approved aftermarket brands that have a long track record of reliability and quality.

Sub-Categories

Sort By:

S54 Valve Adjustment Shim Set - With Tools

10X Entries Into Our F80 M3 Sweepstakes

T#:401664

Part#: VSK4KT2

In Stock

$ 143.84 USD

Add to Wish List

Qty

$ 143.84 USD

Add to Wish List

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges.

Includes

Shim set
Installation tool #83300493743
16 Blade Feeler gauge set

BMW recommends S54 valve inspection and adjustment every 30k miles.

*Click here for valve adjustment instructions*

Show More Show Less

E46 M3 / MZ4 Rod Bearing Overhaul Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:392550

Part#: S54RBPDK

In Stock

Sale - Save 1% $ 455.99

This product was last offered at the strikethrough price on
08-26-2026

Starting at $ 452.97 USD

Add to Wish List

Sale - Save 1%

$ 455.99

This product was last offered at the strikethrough price on
08-26-2026

Starting at $ 452.97 USD

Add to Wish List

Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).

Show More Show Less

S54 Valve Adjustment Kit - With gaskets

10X Entries Into Our F80 M3 Sweepstakes

T#:582218

Part#: 83300493743

In Stock

$ 247.52 USD

Add to Wish List

Qty

$ 247.52 USD

Add to Wish List

BMW recommends valve adjustments every 30k miles on your S54-equipped BMW. We have all the parts you will need to do the job in one discounted package for your BMW E46 M3, Z3, or Z4! Kit includes: 11127832034 x 1 - Valve Cover Gasket 11127831271 x 6 - Spark Plug Hole Gasket 11121437395 x 2 - Valve Cover Seal Washer Grommet 11127830972 x 13 - Valve Cover Nut Grommet VSK4 Wiseco x 1 - Valve Shim Set 83300493743 x 1 - Valve Shim Tool *Click here for valve adjustment instructions* This item fits the following BMWs: 2001-2006 E46 BMW M3, M3 Convertible2001-2002 Z3 BMW M Roadster M Coupe2006-2008 Z4 BMW Z4 M Roadster M Coupe

Show More Show Less

S54 Valve Adjustment Kit w/ Wiseco Shims - E46 M3, Z3M, Z4M

10X Entries Into Our F80 M3 Sweepstakes

T#:582210

Part#: S54WVALVESHIMKT

In Stock

Sale - Save 3% $ 227.31

This product was last offered at the strikethrough price on
08-24-2026

$ 221.45 USD

Add to Wish List

Qty

Sale - Save 3%

$ 227.31

This product was last offered at the strikethrough price on
08-24-2026

$ 221.45 USD

Add to Wish List

Supertech BMW S54 Dual VALVE Spring Kit - E46 M3 Z3M Z4M

T#:7403169

Part#: SPRK-2521-2BM-T1

In Stock at Vendor

$ 1,050.99

This product was last offered at the strikethrough price on
05-03-2026

$ 944.99 USD

Add to Wish List

Qty

$ 944.99 USD

Add to Wish List

Dual valve spring kit to be used with triple groove valves and OEM locks.

Supertech Black Nitrided Intake Valve - +1mm Oversize - Set Of 12 - B...

T#:8549425

Part#: BMIVN-1031S-12

In Stock at Vendor

$ 384.99 USD

Add to Wish List

Qty

$ 384.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our intake valves are made exclusively from an enhanced versions of EV8 (21-4N) steel. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Black Nitride Coating Head Diam: 33mm Material: Stainless Steel 21-4N Groove Type: Triple Groove Length: 123.7mm Stem Diam: 6.95mm

Show More Show Less

Cat Cams Camshaft Set - 288/280 12.75mm/12.50mm Lift - E46 M3 With R...

T#:4414885

Part#: 1301805KIT

Special Order: No Guaranteed ETA

$ 4,372.99 USD

Add to Wish List

Qty

$ 4,372.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is. The included rocker arm kit consist of: - 24x "CAT031" rocker arm, steel billet, coated - 1x oil connector bridge - rocker arms with 0.5mm oil jet hole towards the cam/follower contact area - rocker arm shafts need to be drilled at each rocker arm (in the groove already present) - rocker arm shafts need to be drilled at oil bridge connector (no need to make extra groove, connector has internal groove) - intake rocker arm shaft needs front plug to close - intake rocker arm shaft has no oil feed so an oil bridge is required to connect the intake/exhaust rocker arm shafts *Please note that the factory cams ave a pressure regulator valve that needs to be removed and installed in the new cams*

Show More Show Less

S54 Camshaft Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:599963

Part#: 1131783634KT1

In Stock

Sale - Save 3% $ 307.99

This product was last offered at the strikethrough price on
06-15-2026

$ 298.02 USD

Add to Wish List

Qty

Sale - Save 3%

$ 307.99

This product was last offered at the strikethrough price on
06-15-2026

$ 298.02 USD

Add to Wish List

Includes needed gaskets and hardware for installing a new camshaft set.

S54 Valve Adjustment Kit - E46 M3, Z3M, Z4M

10X Entries Into Our F80 M3 Sweepstakes

T#:401675

Part#: S54VADJKT1

In Stock

Sale - Save 2% $ 405.61

This product was last offered at the strikethrough price on
05-03-2026

$ 396.39 USD

Add to Wish List

Qty

Sale - Save 2%

$ 405.61

This product was last offered at the strikethrough price on
05-03-2026

$ 396.39 USD

Add to Wish List

BMW recommends valve adjustment every 30,000 miles on the S54 engine.This valve adjustment kit includes every thing needed to to a proper valve adjustment on the S54 engine.

Kit includes

Wiseco valve shims
Elring valve cover gasket set
BMW Valve shim Installation tool
Valve shim feeler gauge set
Castrol TWS Edge Professional Engine Oil - 6 Quarts
Mann Oil Filter Kit
Oil pan drain plug

Please note the the included feeler gauge set allows you to stack feeler blades to get a more precise adjustment

*Click here for valve adjustment instructions*

This item fits the following BMWs:
2001-2006 E46 BMW M3, M3 Convertible
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW Z4 M Roadster M Coupe

Show More Show Less

Supertech High Performance Valve Spring Set - E46 M3, MZ3 (S54), MZ4 ...

T#:11760

Part#: TMS11760

Ships in 8 Business Days

$ 1,038.99 USD

Add to Wish List

Qty

$ 1,038.99 USD

Add to Wish List

For BMW's with S54 engines, these valve springs are made with premium Superclean Chrome Silicon Vanadium Steel alloy for high performance and durability at high rpms, with better memory. These are extremely high quality, offered at the best price.

Computer designed to ensure that the wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue for long durability under extreme racing conditions. Computer software allows Supertech to make sure that the harmonics are well under control.

The retainers are manufactured with high quality military certified Titanium alloy, CNC machined for a tight fit that will ensure a long durability.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Cat Cams M52B28 Hot Street Camshaft Set

T#:5858417

Part#: 1304213

Special Order: No Guaranteed ETA

$ 1,524.99 USD

Add to Wish List

Qty

$ 1,524.99 USD

Add to Wish List

Upgrade your M52B28 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their Sport cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! The VANOS (VVT) system on the intake camshaft changes the valve timing: M52 /B28: from 115° to 90° (exhaust: 105° fix) The data are shown for full intake retard (disengaged VVT). Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! Duration Intake @ .1mm: 257° Exhaust @ .1mm: 257° Intake @ 1mm: 220° Exhaust @ 1mm: 220° Lift Intake: 10.15mm Exhaust: 10.15mm Lobe Angle Intake: 110° Exhaust: 105°

Show More Show Less

Cat cams Sport camshaft set 263/256 11.00mm/10.50mm - Z3 1.9 E36 318i...

T#:578599

Part#: 1301712

Special Order: No Guaranteed ETA

$ 1,170.00 USD

Add to Wish List

Qty

$ 1,170.00 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

Sport camshaft set 255/248 10.50mm/10.00mm - Z3 1.9 E36 318i ...

T#:578598

Part#: 1301711

Special Order: No Guaranteed ETA

$ 1,170.00 USD

Add to Wish List

Qty

$ 1,170.00 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

Select Vehicle

Purpose

Category

Internal Engine

Brand

View All Brands

Price

Special Offers

On Sale (6)

Shipping