BMW Suspension Parts for BMW Z Series E36/7 (1996-2002)

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389645

Part#: 192416-1J

In Stock

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

Meyle Upper Strut Mount - E36, Z3, Z4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:375473

Part#: 31336779613

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Should be replaced each time shocks are replaced due to this being a wearing item

Meyle Front Control Arm Bracket - E30 E36 Z3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:178014

Part#: 31121136532MY

Ships on Nov 18, 2026

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

Restore precise steering feel and eliminate unwanted noise. This Meyle bracket includes pre-pressed bushings for a straightforward installation, directly replacing worn components.

Meyle Front Left Control Arm Bushing with Bracket - E30 non-M, E36 Z3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:178013

Part#: 31121136531MY

Back Ordered

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

Restore precise front-end feel and handling with this Meyle HD Front Left Control Arm Bushing and Bracket assembly. Engineered for durability, it includes the bracket and mounting hardware for a straightforward, performance-oriented replacement.

Show More Show Less

Meyle Rear Subframe Bushing - E36, Z3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:579245

Part#: 3003331001

Back Ordered

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Bushing that holds the subframe onto the body

Adjustable Rear Camber/Toe Bushings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582353

Part#: 192026G

In Stock

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389647

Part#: 192416-2L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389646

Part#: 192416-3L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

Front Shock Absorber - Right

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:5944161

Part#: 31316753258

Special Order: No Guaranteed ETA

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

Meyle replacement shock absorber. OE quality replacement part. Meyle-Original products are designed to meet or exceed the standards of original equipment. Comparable OE Cross References - 31311094190 31311091704

Show More Show Less

Front Shock Absorber - Left

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:5944160

Part#: 31316753257

Special Order: No Guaranteed ETA

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

Meyle replacement shock absorber. OE quality replacement part. Meyle-Original products are designed to meet or exceed the standards of original equipment. Comparable OE Cross References - 31311094189 31311091703

Show More Show Less

| Dust cover kit, shock absorber BMW 5 (E39) (09/95-06/04), 7 (E38) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40275174

Part#: 3147400003

Special Order: No Guaranteed ETA

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

This sleeve encases the bump stop to provide extra protection.

Meyle Ball Joint - E36, Z3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:592194

Part#: 31121139131

Ships on Nov 18, 2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Front upper inner ball joint

Front Control Arm Bushing Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:594509

Part#: 31129059288

Back Ordered

$ 20.95 USD

Add to Wish List

Qty

$ 20.95 USD

Add to Wish List

Symptoms of failed control arm bushings commonly include a loose and imprecise feel in the steering, excessive shaking and vibration through the steering that increases with speed and braking, and squeaking, whining or grinding from the front when turning at slow speeds.

Show More Show Less

Rear Sway Bar End Link - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:594573

Part#: 33551131131

Ships on Nov 18, 2026

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

If the sway bar links are broken or worn, the system doesn't work as it should. Replace your end links with one from Meyle and get all the performance characteristics back. New end links help you take turns better with less body roll. A great way to refresh your suspension.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW Z3 (1996-2002)

Sub-Categories

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...

Meyle Upper Strut Mount - E36, Z3, Z4

Meyle Front Control Arm Bracket - E30 E36 Z3

Meyle Front Left Control Arm Bushing with Bracket - E30 non-M, E36 Z3...

Meyle Rear Subframe Bushing - E36, Z3

Adjustable Rear Camber/Toe Bushings

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...

KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...

Front Shock Absorber - Right

Front Shock Absorber - Left

| Dust cover kit, shock absorber BMW 5 (E39) (09/95-06/04), 7 (E38) ...

Meyle Ball Joint - E36, Z3

Front Control Arm Bushing Set

Rear Sway Bar End Link - Priced Each

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results