BMW Suspension Parts for BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:
Rogue Engineering Rear Shock Mount (E30/E36/E46) - Standard 10mm Shock Shaft
Rogue Engineering Rear Shock Mount (E30/E36/E46) - Standard 10mm Shoc...
Rogue Engineering - Corporate Logo
T#:656138
Part#: RSMNONONO
Back Ordered
$ 109.00 USD
Free Shipping
Add to Wish List
$ 109.00 USD
Free Shipping
Add to Wish List
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
Ships in 1 Business Day
$ 380.00 USD
Free Shipping
Add to Wish List
$ 380.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
OEM Sachs Front Upper Strut Mount - E36 Z3 Z4
OEM Sachs Front Upper Strut Mount - E36 Z3 Z4
Sachs - Corporate Logo
T#:359556
Part#: 31331092885
Ships in 1 Business Day
$ 56.53

This product was last offered at the strikethrough price on
08-17-2026

$ 53.62 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 53.62 USD
Free Shipping on orders $49 and up
Add to Wish List
While replacing front shocks it is a good idea to inspect / replace these mounts as the rubber can wear and crack over time. This mounts at the top of the front shock and is held into the chassis with 3 bolts.
Show More Show Less
OEM Sachs Rear Shock Absorber - Z3 1.9/2.3/2.8
OEM Sachs Rear Shock Absorber - Z3 1.9/2.3/2.8
Sachs - Corporate Logo
T#:369565
Part#: 33521094187
Ships in 4 Business Days
$ 98.28 USD
Free Shipping
Add to Wish List
$ 98.28 USD
Free Shipping
Add to Wish List
OEM Sachs shocks provide you with the same great ride quality the car originally came with from the factory at a fraction of the cost. This rear shock is a direct replacement for the factory rear left or right shock.
Show More Show Less
OEM Sachs Trailing Arm Bushing Pair - E30 E10 E12 E21 E23 E24, E28 528e, E36 318ti
OEM Sachs Trailing Arm Bushing Pair - E30 E10 E12 E21 E23 E24, E28 52...
Sachs - Corporate Logo
T#:370564
Part#: 33329061945
Ships on Mar 12, 2027
$ 46.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 46.99 USD
Free Shipping on orders $49 and up
Add to Wish List

OEM quality rear suspension bushing replacement. This bushing is a common cause of noise in the rear.

Bushing Diameter: 30MM

OEM Sachs Front Left Strut Assembly - Z3 2.3/2.5i/2.8/3.0i
OEM Sachs Front Left Strut Assembly - Z3 2.3/2.5i/2.8/3.0i
Sachs - Corporate Logo
T#:369564
Part#: 31316753257
Back Ordered
$ 209.44 USD
Free Shipping
Add to Wish List
$ 209.44 USD
Free Shipping
Add to Wish List
OEM Sachs shocks provide you with the same great ride quality the car originally came with from the factory at a fraction of the cost. This front left strut is a direct replacement for the factory strut assembly.
Show More Show Less
OEM Sachs Front Right Strut Assembly - Z3 2.5 2.5i 2.8
OEM Sachs Front Right Strut Assembly - Z3 2.5 2.5i 2.8
Sachs - Corporate Logo
T#:369563
Part#: 31316753258
Ships in 1 Business Day
$ 210.70 USD
Free Shipping
Add to Wish List
$ 210.70 USD
Free Shipping
Add to Wish List
OEM Sachs shocks provide you with the same great ride quality the car originally came with from the factory at a fraction of the cost. This front right strut is a direct replacement for the factory front suspension.
Show More Show Less
OEM Sachs Front Left Strut Assembly - Z3 1.9
OEM Sachs Front Left Strut Assembly - Z3 1.9
Sachs - Corporate Logo
T#:372885
Part#: 31311091703
Ships in 5 Business Days
$ 211.70 USD
Add to Wish List
$ 211.70 USD
Add to Wish List
OEM Sachs shocks provide you with the same great ride quality the car originally came with from the factory at a fraction of the cost. This front left strut is a direct replacement for the factory front suspension.
Show More Show Less
OEM Sachs Front Right Strut Assembly - Z3 1.9
OEM Sachs Front Right Strut Assembly - Z3 1.9
Sachs - Corporate Logo
T#:372886
Part#: 31311091704
Ships in 5 Business Days
$ 246.99

This product was last offered at the strikethrough price on
10-01-2026

$ 211.99 USD
Free Shipping
Add to Wish List
$ 211.99 USD
Free Shipping
Add to Wish List
OEM Sachs shocks provide you with the same great ride quality the car originally came with from the factory at a fraction of the cost. This front right strut is a direct replacement for the factory rear suspension.
Show More Show Less
Adjustable Rear Camber/Toe Bushings
Adjustable Rear Camber/Toe Bushings
KMAC - Corporate Logo
T#:582353
Part#: 192026G
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping
Add to Wish List
$ 320.00 USD
Free Shipping
Add to Wish List
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
OEM Sachs Rear Shock Mount - E36 E46 Z3
OEM Sachs Rear Shock Mount - E36 E46 Z3
Sachs - Corporate Logo
T#:369237
Part#: 33521092362
Back Ordered
$ 29.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 29.99 USD
Free Shipping on orders $49 and up
Add to Wish List
This is the rear shock mount that connects the top of the rear shock to the body of the car. Sold Individually.
AAF Steel Tie Downs(pair)
AAF Steel Tie Downs(pair)
Advanced Auto Fabrication - Corporate Logo
T#:7624657
Part#: 116127
Ships in 1 Business Day
$ 18.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 18.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Steel car tie down loops are an easy way to add a strong tie down to you car. These tie down loops bolt right to your rear lower shock bolts or your front control arm rear mounts with just a longer bolt. Comes as a pair.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Shipping