BMW Suspension Parts for BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:
TC Kline Single Adjustable Street/Track Coilover Kit - Z3
TC Kline Single Adjustable Street/Track Coilover Kit - Z3
TC Kline Racing - Corporate Logo
T#:594684
Part#: TCKZ3SINGLEKIT
In Stock
$ 2,354.99 USD
Free Shipping
Add to Wish List
$ 2,354.99 USD
Free Shipping
Add to Wish List
Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/400#R springs .
Show More Show Less
TC Kline Single Adjustable Street/Track Coilover Kit - Z3 - FS 400# / RS 500#
TC Kline Single Adjustable Street/Track Coilover Kit - Z3 - FS 400# /...
TC Kline Racing - Corporate Logo
T#:31755189
Part#: TCKZ3SINGLEKIT50
Ships in 2 Business Days
$ 2,354.99 USD
Add to Wish List
$ 2,354.99 USD
Add to Wish List
Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/500#R springs .
Show More Show Less
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
Add to Wish List
$ 380.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Condor Speed Shop Stackable Rear Spring Pad Set - E30, E36 318ti, Z3
Condor Speed Shop Stackable Rear Spring Pad Set - E30, E36 318ti, Z3 ...
Condor Speed Shop - Corporate Logo
T#:577554
Part#: SPGPAD
Ships in 5 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Designed to replace the stock rubber pads. Use them to adjust the ride height on the rear of your e30, e36 318ti or z3. Each set includes 3 pairs of pads of varying thickness (3.5mm, 5mm & 6mm). Use the thinnest pad for the lowest setting, or stack all 3 to raise the rear almost 15mm.
Show More Show Less
Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti, Z3
Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...
Condor Speed Shop - Corporate Logo
T#:578193
Part#: DIFSTKT-1
In Stock
$ 32.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 32.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts
Show More Show Less
Condor Speed Shop Adjustable Rear Trailing Arm Bushing Kit - E10 E21 E30 E36 318ti Z3
Condor Speed Shop Adjustable Rear Trailing Arm Bushing Kit - E10 E21 ...
Condor Speed Shop - Corporate Logo
T#:578349
Part#: ADJRTAB
Ships in 3 Business Days
$ 209.99 USD
Free Shipping
Add to Wish List
$ 209.99 USD
Free Shipping
Add to Wish List
Designed specifically for those of you who prefer not to weld in toe and camber adjustment plates. If you have a lowered or track prepped BMW then you need this adjustable bushing kit. Condor's bushings feature in-car adjustability for camber and toe of up to +/- 1 degree. Their simple design allows for easy and accurate adjustment using the included stainless steel spanner wrench. Once adjusted, trailing arm bolts lock down the CNC machined center cores firmly in place. Condor's UHMW bushings and hard-coat anodized aluminum center cores will stiffen the rear trailing arms while giving you the benefit of adjustable suspension geometry.
Show More Show Less
Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti
Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...
Condor Speed Shop - Corporate Logo
T#:587122
Part#: DIFE30
Ships in 2 Business Days
$ 55.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 55.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.
Show More Show Less
TC Kline Racing Camber Caster Plates - E36 E9X
TC Kline Racing Camber Caster Plates - E36 E9X
TC Kline Racing - Corporate Logo
T#:401266
Part#: TCKE36CAMPLA
Ships in 2 Business Days
$ 489.00 USD
Free Shipping
Add to Wish List
$ 489.00 USD
Free Shipping
Add to Wish List
One of the tricks for getting your BMW to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber there is more grip. BMWs typically have less camber in the front to create understeer. But if you're running a stock setup on the track or autocross you are giving up speed and time as the front tires run out of grip sooner than they should. Made from aircraft grade aluminium, with stainless steels strut inserts and hardware for the ultimate in durability for street or track use. The built in reinforcement plate reduces the stress on the shock tower to reduce the chance of the shock towers tearing. With a maximum adjustment rang of -1.5 degrees camber per side, these plates will allow you to get your suspension right where you need it. NOTE: Will not fit with Bilstein Struts/Shocks. Can only be used with Linear style springs. Will not fit OE-Style Progressive / Barrel style springs. Fits the following BMW's 1992-1999 E36 BMW - 318ti 318i/is/ic 323i/is/ic 325i/is 328i/is/ic M3 2006-2013 E9X BMW - 325i/xi 328i/xi 330i/xi 335i/is/ix M3
Show More Show Less
Adjustable Rear Camber/Toe Bushings
Adjustable Rear Camber/Toe Bushings
KMAC - Corporate Logo
T#:582353
Part#: 192026G
In Stock
$ 320.00 USD
Free Shipping
Add to Wish List
$ 320.00 USD
Free Shipping
Add to Wish List
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping