Please ensure your correct model is selected
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
PRESSURE BRAKE BLEEDER:
We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.
Features:
FLUID CATCH BOTTLE:
keep your fluid's off the floor and into our catch bottle. The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system. Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.
Note:
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
BMW E36 E46 Front RedStuff Performance Brake Pad Set is designed for high-performance models driven aggressively on the street. These brake pads feature a low dusting compound, providing reliable stopping power even when your brake discs are cold.
Upgrade your BMW E36 or E46 with these RedStuff Performance Brake Pads from Turner Motorsport for exceptional braking performance and durability. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking. Following is a listing from EBC for pad recommendations. Front Axle Correct Rear Axle Pad Original Ultimax only Ultimax Ultimax or Original Greenstuff Greenstuff, Ultimax, or Redstuff Redstuff Redstuff or Original Yellowstuff Yellowstuff, Greenstuff, Redstuff, Ultimax, or Original
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-17-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
BRAKE BLEEDER:
We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.
Features:
Note:
Includes:
Note:
CATCH BOTTLE:
Keep your fluid's off the floor and into our catch bottle. The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system. Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.
CALIPER HOOK SET:
Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
BILLET ALUMINUM CAP:
This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.
Features an all aluminum 45mm cap with quick coupler nipple.
BLEEDER WRENCH:
Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
This product was last offered at the strikethrough price on
07-31-2026
This product was last offered at the strikethrough price on
07-31-2026
EXTRACTOR:
The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.
Features:
ADAPTER:
This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose. This will improve your extractor capabilities and make it even more of an all-in-one tool!
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
TORX SCREWDRIVER SET:
Handy Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.
Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners. Large grips add comfort and leverage. Handle through-holes make them easy to hang from pegboard hooks.
Entire kit packaged in a convenient molded case.
Sizes include: T10, T15, T20, T25, T27, and T30.
STANDARD SCREWDRIVER SET:
Elevate your craftsmanship with the Schwaben 6 Piece Screwdriver Set!
Crafted with precision and durability in mind, these professional-grade screwdrivers stand the test of time, ensuring reliable performance for countless projects. Constructed from robust nickel chrome moly, these screwdrivers are built to endure rigorous use, making them reliable companions for various tasks. That's why it's backed by our LIFETIME REPLACEMENT program - because we want this set to stick with you as long as you need it to!
Features:
Includes:
5.5x100mm flat head screwdriver
6.5x150mm flat head screwdriver
8x175mm flat head screwdriver
#1x75mm Phillips screwdriver
#2x100mm Phillips screwdriver
#3x150mm Phillips screwdriver
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The ultimate upgrade when it comes to improving stopping power!
Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.
EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.
This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.
Key Features:
Apollo-Series 6-Piston Calipers
Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs
Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads
Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines
Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid
Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Pagid's newest sprint racing pad was developed for racing cars achieving very high average speeds with short braking distances and functional aero. The RST pads feature very high friction levels for the quickest bite and highest fade resistance than any other Pagid pad. RST pads are broken into 5 levels and all have ranging bite and release characteristics. RST pads will trade low wear for torque output and faster response. These were developed based on the needs of race engineers in World Challenge, Daytona Prototype, and GTLM where functional aero meant high grip in the corners and smaller braking zones.
RST Brake Pad Types:
This item fits the following BMWs:
1995-1998 E36 BMW M3
2001-2006 E46 BMW 330i M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-17-2026
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
BRAKE CALIPER PISTON TOOL SET:
The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.
Made of 100 percent chromalloy steel for strength, durability, and long service life.
PROTECTA SOCKET SET:
Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.
Features:
Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.
Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.
CALIPER HOOK SET:
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.
Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.
Key Features:
Specifications:
Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.
For replacement parts, please call us and ask for:
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
The ultimate upgrade when it comes to improving stopping power!
Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.
EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.
This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.
Key Features:
Apollo-Series 6-Piston Calipers
Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs
Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads
Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines
Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid
Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade
The ultimate upgrade when it comes to improving stopping power!
Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.
EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.
This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.
Key Features:
Apollo-Series 6-Piston Calipers
Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs
Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads
Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines
Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid
Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade
The ultimate upgrade when it comes to improving stopping power!
Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.
EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.
This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.
Key Features:
Apollo-Series 6-Piston Calipers
Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs
Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads
Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines
Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid
Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.
Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.
This item fits the following BMWs:
1995-1998 E36 BMW M3
2001-2006 E46 BMW 330i M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe
