BMW Drivetrain Parts for BMW Z Series E36/7 (1996-2002)

Bav Auto Differential, Transfer Case, Transmission Oil-Pan Wrench ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580353

Part#: B8800025

In Stock

Sale - Save 25% $ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.74 USD

Add to Wish List

The proper size for removing BMW drain plugs.

Differential Fluid Extraction Adapter

10X Entries Into Our F80 M3 Sweepstakes

T#:578659

Part#: B3300000

In Stock

Sale - Save 5% $ 23.99

This product was last offered at the strikethrough price on
08-19-2026

$ 22.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 23.99

This product was last offered at the strikethrough price on
08-19-2026

$ 22.79 USD

Add to Wish List

Differential Fluid Extraction Adapter is an essential tool for efficiently draining and refilling differential fluid, ensuring your vehicle's differential system remains in optimal condition. Designed to work with most extraction pumps, this adapter simplifies maintenance tasks, making it easier to service your differential without the mess or hassle of traditional methods.

Efficient fluid extraction: Allows for quick and clean draining of differential fluid.
Versatile compatibility: Works with most extraction pumps, offering flexibility for various vehicle makes and models.
Hassle-free maintenance: Simplifies the process of refilling and draining differential fluid, reducing time and effort.
Durable construction: Built from high-quality materials to withstand frequent use and harsh conditions.
Easy installation: Designed for a secure fit and easy attachment to extraction pumps.

This Differential Fluid Extraction Adapter is a must-have for any vehicle owner looking to maintain the longevity and performance of their differential system.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E36 E46 Z...

T#:4988548

Part#: BMW04A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.

Show More Show Less

Bav Auto Transmission/Differential Drain Plug Socket Set

10X Entries Into Our F80 M3 Sweepstakes

T#:580446

Part#: B8800141

In Stock

Sale - Save 25% $ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 27.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 27.74 USD

Add to Wish List

Drain plug socket set. Set of 3 hex-head sockets make removal of transmission and differential drain plugs so much easier. Includes 10mm, 14mm and 17mm sizes. 3/8" drive

Bav Auto Fluid Transfer Pump - 200ml - Viton Seals

10X Entries Into Our F80 M3 Sweepstakes

T#:580336

Part#: B8800004

Ships on Feb 26, 2027

Sale - Save 25% $ 38.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 38.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.24 USD

Add to Wish List

Use this high-quality fluid transfer pump to remove old fluid from power steering reservoirs, brake fluid reservoirs or differentials that do not have drain plugs (as on many later model BMWs), or to fill transmissions, differentials, and any other assemblies when changing the fluids.

Show More Show Less

Bav Auto Axle Shaft Impact Force Screw Adapter

10X Entries Into Our F80 M3 Sweepstakes

T#:580429

Part#: B8800122

In Stock

Sale - Save 10% $ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.89 USD

Add to Wish List

For use with B8800120 (Hub Puller Adapter) as an impact driver to aid in removal of stuck CV axle shafts.

Bav Auto Wheel Hub and Rotor Grinding Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580437

Part#: B8800132

In Stock

Sale - Save 10% $ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.19 USD

Add to Wish List

Used to remove corrosion and ensure brake rotors, wheel spacers, etc sit flush on your hubs

Driveshaft Carrier Spare Bushing Set - Track

Spare bushings only - does not include new carrier assembly

T#:4799659

Part#: BSH04A1

Ships in 4 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.

E36 M3, MZ3 JB Racing Lightweight Aluminum Flywheel

T#:3771

Part#: 520-010-240

Ships in 9 Business Days

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe

Show More Show Less

Bav Auto Fluid Transfer Pump - 1 Liter - Viton Seals

10X Entries Into Our F80 M3 Sweepstakes

T#:580335

Part#: B8800003

In Stock

Sale - Save 15% $ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.84 USD

Add to Wish List

Qty

Sale - Save 15%

$ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.84 USD

Add to Wish List

Use this high-quality fluid transfer pump to remove old fluid from power steering reservoirs, brake fluid reservoirs or differentials that do not have drain plugs (as on many later model BMWs), or to fill transmissions, differentials, and any other assemblies when changing the fluids. For draining differentials we recommend using the Bavarian Autosport adapter part # B3300000.

Show More Show Less

Bav Auto Oil Extractor - 10 Liter - Inserts Into Dip Stick Tube ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580333

Part#: B8800001

Ships in 8 Business Days

Sale - Save 15% $ 175.99

This product was last offered at the strikethrough price on
09-23-2026

$ 149.59 USD

Add to Wish List

Qty

Sale - Save 15%

$ 175.99

This product was last offered at the strikethrough price on
09-23-2026

$ 149.59 USD

Add to Wish List

Change your oil without getting underneath the vehicle! This oil extractor pulls the oil out of your engine through the dip stick tube.

Bav Auto Hub Adapter / Hub Puller

10X Entries Into Our F80 M3 Sweepstakes

T#:580427

Part#: B8800120

Ships in 8 Business Days

Sale - Save 10% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

For use with B8800122 impact driver to remove stuck CV axle shafts.

Driveshaft Carrier Spare Bushing Set - Street

Spare bushings only - does not include new carrier assembly

T#:4799658

Part#: BSH04A0

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.

E30 318i/is, E36 318i, Z3 1.9 JB Racing Lightweight Aluminum Flywheel...

T#:3769

Part#: 520-040-215

Ships in 10 Business Days

11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Qty

11% off MSRP

$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9

Show More Show Less

E46 323/325/328/330 5-speed, Z3 2.3/2.8/3.0 JB Racing Lightweight Alu...

T#:4227

Part#: 520-140-240

In Stock

$ 602.00

This product was last offered at the strikethrough price on
09-02-2026

$ 550.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 602.00

This product was last offered at the strikethrough price on
09-02-2026

$ 550.99 USD

Limited Qty Sale

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (with 5-speed manual transmission)
2001-2005 E46 BMW 325xi 330xi
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

Show More Show Less

Bav Auto Wheel Bearing Tool Master Set

10X Entries Into Our F80 M3 Sweepstakes

T#:580402

Part#: B8800092

In Stock

Sale - Save 5% $ 355.99

This product was last offered at the strikethrough price on
05-03-2026

$ 338.19 USD

Add to Wish List

Qty

Sale - Save 5%

$ 355.99

This product was last offered at the strikethrough price on
05-03-2026

$ 338.19 USD

Add to Wish List

For removal and installation of pressed in rear wheel bearings on most BMW's and pressed in front wheel bearing on many all-wheel drive BMWs.

Sachs Performance Clutch Kit for JB Racing Flywheel Kit - E36, E46, Z...

T#:4311

Part#: 881861999855-K

Ships in 10 Business Days

$ 928.95 USD

Add to Wish List

Qty

$ 928.95 USD

Add to Wish List

This replacement "sprung-hub" clutch package is designed to work with our (JB Racing) lightweight aluminum flywheel 520-010-240 for the BMW E36, E46, Z3, and Z4 models. The Sachs HD clutch disc has a sprung hub to minimize noise and vibration and organic linings to give the feel and engagement of a stock clutch.

The Sachs HD pressure plate will clamp with greater force -- allowing approximately 350 ft-lbs of torque, which makes it an obvious upgrade from the stock clutch kit.

Because Sachs is an OE supplier to most German cars, replacement parts are just a phone call away. This kit uses the stock throw-out bearing (included in the price!).

**Not for use with stock flywheel or other brands of lightweight flywheels**

Show More Show Less

Bav Auto 36MM 12 Point Socket - 1/2" Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:580421

Part#: B8800114

In Stock

Sale - Save 25% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.49 USD

Add to Wish List

This is a thin-walled 1/2" drive 36mm impact socket - useful in removing or installing wheel bearing and axle nuts on several BMW models.

BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel ...

T#:3774

Part#: 520-030-240

Ships on Nov 2, 2026

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel offers a significant performance upgrade by replacing the heavy stock steel flywheel with a much lighter aluminum version. This JB Racing flywheel is designed to deliver faster acceleration, improved throttle response, and enhanced overall performance for your BMW.

The modern stock flywheels are burdened with additional components meant to dampen vibrations, which unfortunately adds unnecessary weight. The JB Racing aluminum flywheel, weighing just 10.0 lbs compared to the stock 25.0 lbs, eliminates this excess mass, allowing more power to reach the wheels and reducing the energy wasted on spinning the flywheel. Engine builders prioritize lightweight flywheels when optimizing race engines for maximum efficiency, and the difference is especially noticeable in how quickly the engine revs and reaches its power band.

This JB Racing lightweight flywheel is a direct replacement for the stock flywheel and is compatible with the factory BMW organic clutch. This compatibility ensures that you can use standard replacement clutches, making maintenance simple and cost-effective. The flywheel can also be resurfaced for a fresh contact surface, so there’s no need to buy a new one when it’s time to replace the clutch.

While single-mass aluminum flywheels like this one may result in slightly more noise and vibration compared to dual-mass designs, this can be managed with heavier transmission oil and sprung hub clutches, such as the Sachs Performance clutch available through Turner Motorsport.

Faster acceleration: Reduces the rotational mass for quicker engine response.
Improved throttle response: Engine revs more freely and builds RPM faster.
Enhanced performance: More power delivered to the wheels for better driving dynamics.
Cost-effective maintenance: Compatible with factory BMW organic clutches and can be resurfaced.
Direct replacement: Easy upgrade with no modifications required.

Vehicle Compatibility:

1996-1999 E36 BMW 328i, 328is, 328ic
1997-1998 Z3 BMW Z3 2.8

Show More Show Less

Bav Auto Hub Puller Slide Hammer Adapter

10X Entries Into Our F80 M3 Sweepstakes

T#:580428

Part#: B8800121

In Stock

Sale - Save 18% $ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 18%

$ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Limited Qty Sale

Add to Wish List

Necessary in order to use Bav Auto's Hub Adapter/Puller (B8800120) . 5/8" x 18T UNF thread.

Bav Auto Transmission 17mm Drain Plug Wrench - Manual Transmission ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580447

Part#: B8800142

In Stock

Sale - Save 25% $ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 14.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 14.99 USD

Add to Wish List

Makes changing your transmission fluid an easy task. 1/2 " drive, for use in BMWs with 17mm female allen transmission drain plugs.

JB Racing Lightweight Steel Flywheel - Grand-Am Legal - E46, MZ3, Z4 ...

T#:40748575

Part#: 520010240SGA

Ships on Nov 2, 2026

$ 868.00 USD

Add to Wish List

Qty

$ 868.00 USD

Add to Wish List

This lightened steel flywheel is specifically designed (and approved) for use in Grand-Am road racing but can also be used as a mild street upgrade if a full aluminum lightweight flywheel is not called for. The Grand-Am flywheel is 20% lighter than stock to meet the rules for the GS and ST classes.Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. A lightweight flywheel does away with the dual mass design and its additional mass so more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. The engine revs much faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

Grand-Am approved this flywheel to be used with a factory E36 M3 clutch. This opens up a lot of clutch and pressure plate options but we typically used this with a stock Sachs OEM clutch kit. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches.

Lightweight flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

If being used on a 330i 6-speed or Z4 6-speed an additional pilot bearing hub is required. Select your appropriate model and transmission from the list below.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 20.0lbs

This item fits the following BMWs:
2001-2002 E46 BMW 330i 330ci 5-speed
2003-2006 E46 BMW 330i 330ci 6-speed
2001-2006 E46 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Drivetrain Parts for BMW Z3 (1996-2002)

Sub-Categories

Bav Auto Differential, Transfer Case, Transmission Oil-Pan Wrench ...

Differential Fluid Extraction Adapter

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E36 E46 Z...

Bav Auto Transmission/Differential Drain Plug Socket Set

Bav Auto Fluid Transfer Pump - 200ml - Viton Seals

Bav Auto Axle Shaft Impact Force Screw Adapter

Bav Auto Wheel Hub and Rotor Grinding Kit

Driveshaft Carrier Spare Bushing Set - Track

E36 M3, MZ3 JB Racing Lightweight Aluminum Flywheel

Bav Auto Fluid Transfer Pump - 1 Liter - Viton Seals

Bav Auto Oil Extractor - 10 Liter - Inserts Into Dip Stick Tube ...

Bav Auto Hub Adapter / Hub Puller

Driveshaft Carrier Spare Bushing Set - Street

E30 318i/is, E36 318i, Z3 1.9 JB Racing Lightweight Aluminum Flywheel...

E46 323/325/328/330 5-speed, Z3 2.3/2.8/3.0 JB Racing Lightweight Alu...

Bav Auto Wheel Bearing Tool Master Set

Sachs Performance Clutch Kit for JB Racing Flywheel Kit - E36, E46, Z...

Bav Auto 36MM 12 Point Socket - 1/2" Drive

BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel ...

Bav Auto Hub Puller Slide Hammer Adapter

Bav Auto Transmission 17mm Drain Plug Wrench - Manual Transmission ...

JB Racing Lightweight Steel Flywheel - Grand-Am Legal - E46, MZ3, Z4 ...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results