BMW Motor Mounts for BMW Z3 (1996-2002)

Clear BMW chassis

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

Sort By:

Corteco Engine Mount - E36, E46, E90, E92, E93, Z3, Z4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2157

Part#: 11812283798

In Stock

$ 82.69

This product was last offered at the strikethrough price on
06-23-2026

$ 82.00 USD

Add to Wish List

Qty

$ 82.00 USD

Add to Wish List

Don't neglect your motor mounts! The stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to shift. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

This is a replacement stock motor mount used on all M3s since 1995 and the Z4 M. It's also the standard motor mount for Z3 and E46 325xi/330xi models (left side). It can also used as an upgrade for non-M 1992-2006 E36 and E46 6 cylinder models because it's slightly stiffer to reduce flex and for a longer lifespan.

Sold per mount.

This motor mount / engine mount fits the following BMWs:
1995-1999 E36 BMW M3
2001-2005 E46 BMW 325xi 330xi (for left side only)
2001-2006 E46 BMW M3
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

In addition, this can be used as a motor mount upgrade for these models:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

Show More Show Less

Powerflex Tuneable Hybrid Urethane Engine Mounts - Street - E36, E46,...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14849765

Part#: PFF5-4650

In Stock

$ 431.99 USD

Add to Wish List

Qty

$ 431.99 USD

Add to Wish List

Why have only one engine mount? The Powerflex Tuneable "Hybrid" Urethane & Aluminum engine mounts for the E36, E46, and E90/E92 M3 are configurable to match your current car spec. It's "tuneable" to multiple performance settings - - Street Performance with a dual-urethane core (65A and 80A bushings) - Track Performance using stiffening pins inserted into the mount. The mount does not need to be removed to insert the pins, making this a tuneable mount from the paddock. Also available is a full-race mount with a 95A black urethane core and stiffening pins. With the stiffest configuration the Powerlfex mount is a whopping 675% stiffer than a new M3 engine mount! Other BMW urethane engine mounts are made with a single solid urethane block of one durometer. This is simple and cheap to manufacture but is not ideal for most scenarios - the mount is either too stiff or not stiff enough and poor manufactuing quality leads to continued problems. Powerflex properly engineered their mount to absorb vibrations while providing exceptional strength and sheer resistance. The design uses a "soft" Red 65A urethane to absorb Noise, Vibration, and Harshness (NVH) with a stiffer Purple 80A urethane for improved strength and performance. If you desire a stiffer mount for tracking or drifting the mount can be made stiffer without removing it from the car! Unsnap the yellow retaining collar and insert the four stiffening rods. This reduces deflection in the mount and makes it stronger. Why would you want a stiffer engine mount? Mounts need to be stronger to withstand the higher stresses seen with hard driving or launching. Less deflection in the mount means a failure is less likely. The stock mounts are too soft for these types of driving and it's not uncommon for rubber mounts to break apart, mounting studs to shear off, and for the engine to move around and contact other parts (the radiator for example). Stiffer mounts help prevent these issues as well as giving better engine response, quicker power delivery, and more precise shifting (reducing the chances of a mis-shift). The beauty of the Powerflex tunebale mount is that it can be adapted for changing conditions, unlike other urethane or solid mounts which are either too stiff or not stiff enough. These urethane/aluminum engine mounts are sold as a pair. They replace original BMW part numbers 22111095444, 22116779970, 22116771361, 11811092583, 11812283798, 11817837985, 11812228298, and 11811136542. Fits on all 6-cylinder E36 325i/328i/M3 and E46 323i/325i/328i/330i/M3 (not Xi AWD), and V8 E90/E92 M3.

Show More Show Less