BMW Intake Parts for BMW Z Series E36/7 (1996-2002)

Crankcase Vent Valve - E36, E39, Z3

10X Entries Into Our F80 M3 Sweepstakes

T#:14288

Part#: TMS14288

In Stock

Sale - Save 26% $ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.23 USD

Add to Wish List

Qty

Sale - Save 26%

$ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.23 USD

Add to Wish List

The crankcase vent valve (CVV) holds and releases oil vapors that build up in the engine. It's the same type of system previously known as a PCV valve and the same deficiencies exist. Over time, the CVV will become saturated and clogged with oil. When this happens, the oil-rich vapors from the engine will back up into the intake tract and eventually into the combustion chamber. The oil added to the gasoline/air mix will cause misfires, carbon deposits, rough running, and blue smoke out the tailpipe. Replacing the CVV every 70,000 miles will ensure the correct and clean ventilation of oil vapor.

Replacement of the CVV can be done without removing the intake manifold. But replacing it during an M50 Manifold upgrade is the perfect time.

Included:
11151703484 - crankcase vent valve
13411733217 - sealing grommet

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW Z3 M Roadster M Coupe

Show More Show Less

Air Adjustment Unit/DISA Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710824

Part#: 11617544805-KT

In Stock

Sale - Save 25% $ 155.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.87 USD

Add to Wish List

Qty

Sale - Save 25%

$ 155.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.87 USD

Add to Wish List

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Dinan Replacement Air Filter Sock - Priced Each

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:11268530

Part#: D401-0111

Ships on Nov 9, 2026

Sale - Save 11% $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.33 USD

Add to Wish List

Qty

Sale - Save 11%

$ 42.99

This product was last offered at the strikethrough price on
09-29-2026

$ 38.33 USD

Add to Wish List

Replacement air filter protection sock.

Air Intake Boot Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710812

Part#: 13541705209-KT

Ships in 2 Business Days

Sale - Save 28% $ 129.99

This product was last offered at the strikethrough price on
05-03-2026

$ 93.66 USD

Add to Wish List

Qty

Sale - Save 28%

$ 129.99

This product was last offered at the strikethrough price on
05-03-2026

$ 93.66 USD

Add to Wish List

The air intake boots are a common source of vacuum leaks, as with age they harden and crack, this kit includes every thing needed to replace both boots and a new aluminum F connector to replace the factory brittle plastic connector.

Show More Show Less

Air Adjustment Unit/DISA Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677538

Part#: 11617533344-KT

In Stock

Sale - Save 25% $ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

Qty

Sale - Save 25%

$ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD

Add to Wish List

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware

Show More Show Less

Idle Control Valve Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744026

Part#: 11611437453-KT

In Stock

$ 173.13 USD

Add to Wish List

Qty

$ 173.13 USD

Add to Wish List

Located in the intake system, this part is a common source of idle issues. This kit includes a new mount and idle control valve grommet

Air Intake Boot Refresh Kit with High-Flow Panel Filter

10X Entries Into Our F80 M3 Sweepstakes

T#:26771752

Part#: M52TUBTFLTRKT2

Back Ordered

Sale - Save 19% $ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 136.79 USD

Add to Wish List

Qty

Sale - Save 19%

$ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 136.79 USD

Add to Wish List

If you're seeking to eradicate vacuum leaks and enhance the overall airflow of your intake system, look no further than this comprehensive kit.

The M52TU/M54 air intake boots have gained notoriety for their tendency to crack, resulting in vacuum leaks, triggering check engine lights, and causing various performance issues. The soft rubber boots are constantly exposed to high temperatures from the engine, leading them to become brittle and prone to cracking over time. These cracks permit unmeasured air intake beyond the airflow meter, resulting in rough idling, sputtering, or even engine stalls.

This kit offers a solution by providing both lower and upper air intake boots/hoses for a complete repair. Additionally, as a bonus, the kit includes an ECS Exact-Fit High-Flow Air Filter to optimize your vehicle's intake tract.

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Oct 26, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Oct 27, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Oct 27, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

WMI Inline Filter

T#:21176933

Part#: BMS-WMI-FIL

Ships on Oct 27, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Nov 6, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW Z3 (1996-2002)

Sub-Categories

Crankcase Vent Valve - E36, E39, Z3

Air Adjustment Unit/DISA Valve Kit

BMC Filter Cleaning Kit

Dinan Replacement Air Filter Sock - Priced Each

Air Intake Boot Kit

Air Adjustment Unit/DISA Valve Kit

Idle Control Valve Kit

Air Intake Boot Refresh Kit with High-Flow Panel Filter

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

1 Gallon Methanol Tank - Clear/White

BMS DDP5800 Water/Methanol Injection Pump

2 Gallon Low Profile Universal Methanol Tank

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

1.25 Gallon Heavy-Duty Universal Methanol Tank

Water/Methanol Injection Hose - 20'

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

WMI Inline Filter

Super Atomizing Water/Methanol Injection Nozzles

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results