BMW Suspension Bushings & Mounts for BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

Lemforder - Corporate Logo
T#:361084
Part#: 31336779613
In Stock
$ 49.99

This product was last offered at the strikethrough price on
05-04-2026

$ 45.39 USD
Free Shipping on orders $49 and up
$ 45.39 USD
Free Shipping on orders $49 and up

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Febi Control Arm Bracket - Right - E30, E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:376585
Part#: 31121139790
In Stock
$ 33.43

This product was last offered at the strikethrough price on
04-16-2026

$ 30.79 USD
Free Shipping on orders $49 and up
$ 30.79 USD
Free Shipping on orders $49 and up
Does not include a bushing
Febi Control Arm Bracket - Left - E30, E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:376586
Part#: 31121139789
In Stock
$ 30.18

This product was last offered at the strikethrough price on
06-19-2026

$ 29.35 USD
Free Shipping on orders $49 and up
$ 29.35 USD
Free Shipping on orders $49 and up
Does not include a bushing

Febi Upper Strut Mount - E36, Z3, Z4
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382546
Part#: 31336779613
In Stock
$ 37.99

This product was last offered at the strikethrough price on
04-20-2026

$ 31.99 USD
Free Shipping on orders $49 and up
$ 31.99 USD
Free Shipping on orders $49 and up
Should be replaced each time shocks are replaced due to this being a wearing item - made in Germany!

Condor Speed Shop - Corporate Logo
T#:578193
Part#: DIFSTKT-1
Ships in 1 Business Day
$ 32.00 USD
Free Shipping on orders $49 and up
Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts
Show More Show Less
SKF - Corporate Logo
T#:1195830
Part#: 33131204568
Ships in 1 Business Day
$ 53.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD
Free Shipping on orders $49 and up
$ 50.99 USD
Free Shipping on orders $49 and up
Located on each differential output flange

Condor Speed Shop - Corporate Logo
T#:587122
Part#: DIFE30
Ships in 2 Business Days
$ 55.00 USD
Free Shipping on orders $49 and up
Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.
Show More Show Less
Lemforder - Corporate Logo
T#:558330
Part#: 33521092362
Ships in 1 Business Day
$ 25.99 USD
Free Shipping on orders $49 and up

Febi Rear Shock Mount - E30, E36, E46, Z3, Z4
Upgraded, more durable mount from the E46 M3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:350799
Part#: 33526779670
Ships on Jan 11, 2027
$ 20.99 USD
Free Shipping on orders $49 and up
$ 20.99 USD
Free Shipping on orders $49 and up
Two required per vehicle

Febi Front Control Arm Bracket - Left - E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381927
Part#: 31121136531
Ships in 1 Business Day
$ 61.99

This product was last offered at the strikethrough price on
08-13-2026

$ 50.12 USD
Free Shipping on orders $49 and up
$ 50.12 USD
Free Shipping on orders $49 and up
Includes pressed in bushings
Febi Front Control Arm Bracket - Right - E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381928
Part#: 31121136532
Ships in 1 Business Day
$ 61.61

This product was last offered at the strikethrough price on
05-29-2026

$ 55.48 USD
Free Shipping on orders $49 and up
$ 55.48 USD
Free Shipping on orders $49 and up
Includes pressed in bushings
Packaged by Turner - Corporate Logo
T#:338064
Part#: 31129069035
Back Ordered
Starting at $ 46.99 USD
Free Shipping on orders $49 and up
Starting at $ 46.99 USD
Free Shipping on orders $49 and up
Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
Show More Show Less


Lemforder - Corporate Logo
T#:398333
Part#: 33504035929
In Stock
$ 14.64

This product was last offered at the strikethrough price on
07-09-2026

$ 14.53 USD
Free Shipping on orders $49 and up
$ 14.53 USD
Free Shipping on orders $49 and up

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride. Factory upgrade for Non-M vehicles.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMW chassis:
E36,E46,Z3

Show More Show Less
Febi Front Sway Bar Bushing - E36, Z3
For roadster models only
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381992
Part#: 31351090263
Ships in 7 Business Days
$ 9.99

This product was last offered at the strikethrough price on
05-07-2026

$ 8.99 USD
Free Shipping on orders $49 and up
$ 8.99 USD
Free Shipping on orders $49 and up
For 24mm diameter sway bar
Lemforder - Corporate Logo
T#:397976
Part#: 31129059288
Ships in 1 Business Day
$ 20.99

This product was last offered at the strikethrough price on
07-01-2026

$ 17.99 USD
Free Shipping on orders $49 and up
$ 17.99 USD
Free Shipping on orders $49 and up

Standard front control arm bushing made by an OEM supplier. Price is for the pair.

For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3).

Lemforder is a supplier of parts directly to BMW and other major automotive manufacturers. In order to save on the cost of parts, we are able to provide you these parts directly from Lemforder at a much lower cost than if bought directly from BMW. These parts have the same high quality and reliability, just without the BMW logos.

Show More Show Less

Febi Front Sway Bar Bushing - E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381994
Part#: 31351090300
Ships in 1 Business Day
$ 9.99

This product was last offered at the strikethrough price on
05-29-2026

$ 8.99 USD
Free Shipping on orders $49 and up
$ 8.99 USD
Free Shipping on orders $49 and up
22.5mm diameter sway bar

Febi - Corporate Logo
T#:382606
Part#: 33329058822
Ships in 1 Business Day
$ 21.99

This product was last offered at the strikethrough price on
05-07-2026

$ 19.99 USD
Free Shipping on orders $49 and up
$ 19.99 USD
Free Shipping on orders $49 and up
30mm
OEM Lemforder Rear Axle Shock Mount - E30 E36 E46 Z3
Upgraded, more durable mount from the E46 M3
Lemforder - Corporate Logo
T#:12527
Part#: 33521092362
Ships on Apr 2, 2027
$ 19.99

This product was last offered at the strikethrough price on
08-04-2026

$ 10.99 USD
Free Shipping on orders $49 and up
$ 10.99 USD
Free Shipping on orders $49 and up

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Febi Rear Shock Mount - E36, E46, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382112
Part#: 33521092362S1
Ships on Jan 11, 2027
$ 17.99 USD
Free Shipping on orders $49 and up
$ 17.99 USD
Free Shipping on orders $49 and up
Two required per vehicle
Febi Front Sway Bar Bushing - E34, E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:7783
Part#: 31351135805
Ships on Jan 11, 2027
$ 16.99 USD
Free Shipping on orders $49 and up
$ 16.99 USD
Free Shipping on orders $49 and up


BMW Stabilizer Rubber Mounting - D=23mm
This item fits the following BMW Chassis:
E34,E36


Febi Ball Joint - E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381930
Part#: 31121139131
Ships on Jan 11, 2027
$ 18.99 USD
Free Shipping on orders $49 and up
Front upper inner ball joint

Febi - Corporate Logo
T#:55965841
Part#: 2227287
Special Order: No Guaranteed ETA
New Item
$ 9.99 USD
Free Shipping on orders $49 and up
This Febi front lower control arm bushing is the perfect factory-grade solution to tighten up your front suspension.
Febi - Corporate Logo
T#:363273
Part#: 33329061945
Back Ordered
$ 16.99

This product was last offered at the strikethrough price on
06-03-2026

$ 15.99 USD
Free Shipping on orders $49 and up
$ 15.99 USD
Free Shipping on orders $49 and up
One pair per side required - 30mm