BMW E52 Z8 S62 5.0L

Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

• Simplifies spacer usage with a single application designed for various spacer widths
• Wheel studs act as a wheel hanger, easing wheel installation
• Reduces constant wheel bolt removal, minimizing wear on wheel hubs
• Facilitates quick and easy tire changes as the studs stay in the hub
• Recommended torque of 15Nm with thread-locking compound during installation
• Compatible with spacers up to 20mm in size

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

• 7 Liters of  Race Tech GT1 10w-60 Engine Oil
• Hengst Oil Filter Kit
• Oil Drain Plug & Gasket

Synthoil Race Tech GT1 is a modern hig performance engine oil formulated for engines that are experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exception lubrication and engine wear protection. This design and composition makes it a great choice to used for racing and other demanding needs. Great for both gasoline and diesel engines.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

Together they make this job simple and easy and ensure a tight fit with a new ring. 

Shark Injector Performance software includes:

• Unlock LOADS of torque and horsepower in all gears, especially 1st, 2nd, and 3rd
• Race Software for Headers/Cat-delete
• Choose between 91 and 93 octane
• Quicker throttle response in both Sport and non-Sport modes
• Top Speed Limiter Removed
• Choice of several options to make driving your M5 more enjoyable

Performance software is a must-have upgrade on your E39 M5 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before! 

The M5 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The stock software artificially limits torque output, especially in the first three gears. We raised the torque limiters in all gears so there is more torque available. You will see an immediate difference as soon as you leave your driveway! Choose between a stock 7,000 or raised 7,400 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S62 engine beyond what BMW did by making more power and torque and a smoother-running engine. 

Gains of up to 23 hp @ 6100 rpm and 19 lb/ft torque @ 5000 rpm!!!
We used several E39 M5s on our dyno to establish what the average/typical power numbers are. The dyno charts on the right are from the same car - a 2003 E39 M5 that was already equipped with intakes, mufflers, and running 93 octane. For our Shark Injector dynos we made baseline runs with the stock software and then runs in 3rd gear and 4th gear. The only changes to the car was the Shark Injector software. Why did we post dyno runs in different gears? The 3rd gear run shows the torque gain with the new torque limiters in the software. The 4th gear run is posted to be consistent with the industry-standard of dyno-ing cars in 4th gear. Note: comparing dyno results and wheel horsepower numbers from one shop to another is not advised. What really matters is the gain from stock to modified from the same car on the same dyno.

Product Options: 
Octane: Choose either 91 or 93 minimum octane. For 93 we can be more aggressive with the timing and get more power. But you must have 93+ octane available, using the 93 version with anything less is not recommended. 
Throttle Setting: Choose an aggressive throttle response or a smoother, linear setting. The Shark enhanced throttle will be much quicker and more in line with the Motorsport inspiration of the M5. The Euro throttle is more linear in response and smoother than the stock US or Shark throttle. The Euro throttle is also known as the 'M5Board tune'. Our customers are split 50/50 so there is no "best throttle" mapping - it's personal preference. 
Rev Limit: Choose a stock 7,000 RPM or raised 7,400 RPM rev limit. The raised rev limit is great for track or autocross where you can stay in gear longer and avoid untimely upshifts. The stock rev limit is for the non-track customer who wants all of the other benefits without the need to rev beyond the stock setting. 
DSC/Sport Mode: This option will make Sport Mode active only when DSC is turned off. The Sport Mode button is disabled altogether so the only way to get Sport is to disable DSC. 


The Shark Injector plugs into the diagnostic port inside the E39 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

The S62 engine has a known history of rod bearing failure. If your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing, a failure that has the potential to trash your crankshaft.

What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service!

Kit Includes:

Turner Motorsport "Race Series" WPC-Treated Rod Bearing Shells (16) Genuine BMW Connecting Rod Bolts (16) OEM Hengst Oil Filter Kit Castrol Edge Euro Car Engine Oil (10w-60) - 7 Quarts Turner Oil Change Decal Elring Oil Pan Gasket Permatex Ultra Slick Engine Assembly Lube (4 oz.)

When changing your oil, you want to make sure you are using the best. Turner Motorsport now offers our premium Castrol TWS Oil service kits to ensure you are getting the best products available for your routine oil services. Everything included has been specifically picked to ensure high quality and outstanding wear protection. 

One of the most popular engine oil choices on the market today, Castrol Edge Professional TWS 10-60 engine oil is premium engine oil approved by BMW for use in a wide variety of engines such as the M30, S54, S85, and many more. In fact, this oil is the same oil that BMW uses for their performance engines from the factory. Thanks to its premium blend of synthetic oil and additives, this oil continues to provide protection under even the harshest conditions and is perfect for both street cars and cars that see occasional track use.

Specifications:

• SAE-10w60
• ACEA A3/B4
• API SN/CF
• VW 501 01/505 00
• Exclusive Approval for BMW M-Models

Included in this Kit:

• Castrol TWS 10w-60 Premium Oil - 8 Liters
• Engine Oil Drain Plug & Washer
• Premium Oil Filter