Select Vehicle
BMW
Mini
Category
-
Engine Software
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Shark Injector Performance software includes:
Performance software is a must-have upgrade on your E39 M5 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M5 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The stock software artificially limits torque output, especially in the first three gears. We raised the torque limiters in all gears so there is more torque available. You will see an immediate difference as soon as you leave your driveway! Choose between a stock 7,000 or raised 7,400 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S62 engine beyond what BMW did by making more power and torque and a smoother-running engine.
Gains of up to 23 hp @ 6100 rpm and 19 lb/ft torque @ 5000 rpm!!!
We used several E39 M5s on our dyno to establish what the average/typical power numbers are. The dyno charts on the right are from the same car - a 2003 E39 M5 that was already equipped with intakes, mufflers, and running 93 octane. For our Shark Injector dynos we made baseline runs with the stock software and then runs in 3rd gear and 4th gear. The only changes to the car was the Shark Injector software. Why did we post dyno runs in different gears? The 3rd gear run shows the torque gain with the new torque limiters in the software. The 4th gear run is posted to be consistent with the industry-standard of dyno-ing cars in 4th gear. Note: comparing dyno results and wheel horsepower numbers from one shop to another is not advised. What really matters is the gain from stock to modified from the same car on the same dyno.
Product Options:
Octane: Choose either 91 or 93 minimum octane. For 93 we can be more aggressive with the timing and get more power. But you must have 93+ octane available, using the 93 version with anything less is not recommended.
Throttle Setting: Choose an aggressive throttle response or a smoother, linear setting. The Shark enhanced throttle will be much quicker and more in line with the Motorsport inspiration of the M5. The Euro throttle is more linear in response and smoother than the stock US or Shark throttle. The Euro throttle is also known as the 'M5Board tune'. Our customers are split 50/50 so there is no "best throttle" mapping - it's personal preference.
Rev Limit: Choose a stock 7,000 RPM or raised 7,400 RPM rev limit. The raised rev limit is great for track or autocross where you can stay in gear longer and avoid untimely upshifts. The stock rev limit is for the non-track customer who wants all of the other benefits without the need to rev beyond the stock setting.
DSC/Sport Mode: This option will make Sport Mode active only when DSC is turned off. The Sport Mode button is disabled altogether so the only way to get Sport is to disable DSC.
The Shark Injector plugs into the diagnostic port inside the E39 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.
This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Shark Injector Performance software includes:
Performance software is a must-have upgrade on your E39 M5 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The Sport Mode Memory option will remember if you left the car in Sport Mode or not. When you restart the car it will be in the last setting you used. This is perfect for owners who use Sport Mode all the time. You won't have to remember to press the button each time you start the car. The Sport Mode button functions the same as before so you can turn Sport on/off at any time. The software will remember which one you left it in.
The M5 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The stock software artificially limits torque output, especially in the first three gears. We raised the torque limiters in all gears so there is more torque available. You will see an immediate difference as soon as you leave your driveway! Choose between a stock 7,000 or raised 7,400 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S62 engine beyond what BMW did by making more power and torque and a smoother-running engine.
Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle.
Gains of 23 hp @ 6100 rpm and 19 lb/ft torque @ 5000 rpm!!!The Shark Injector plugs into the diagnostic port inside the E39 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
This item fits the following BMWs:
1999-2003 E39 BMW M5