click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts
  16. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids
  19. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Dinan Coilover Spring Kits
  7. Turner / H&R Height Adjustable Spring Sets
  8. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  9. H&R Coil Over Suspensions
  10. KW Coil Over Suspensions
  11. ST Suspension Coilover Kits
  12. Turner Motorsport TrackSport Coil-Over Suspension Kits
  13. Turner Motorsport Racing Suspension Kits
  14. Chassis Reinforcement Kits & Parts
  15. Sway Bar Kits
  16. Sway Bar Links & Sway Bar Parts
  17. Camber / Caster Kits
  18. Strut Braces & Stress Bars
  19. Control Arm Replacements & Upgrades
  20. Suspension Bushings & Mounts
  21. Wheel Bearings & Hub Assemblies
  22. Steering Racks & Power Steering Pumps
  23. Tie Rods & Steering Parts
  24. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Dinan Performance Wheels
  8. Original BMW Wheels and Wheel Upgrades
  9. Turner Motorsport Wheel Spacers
  10. ECS Tuning Wheel Spacers
  11. H&R Wheel Spacers
  12. Wheel Bolts, Wheel Studs and Nuts
  13. Wheel Emblems, Caps, and Accessories
  14. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW aFe Cold-Air Intake Kits

BMW aFe Cold-Air Intake Kits Founded in 1999, Advanced Flow Engineering (aFe) produces high flow, high performance replacement air filters and complete cold-air intake systems for BMWs. Each precision-engineered intake component and filter offers excellent design and construction, lifetime cleanable cotton filters that breathe easier than paper filters, powder-coated heat shields to block out hot engine air, and measurable performance gains resulting in increased horse power and torque. aFe's reputation is fast growing as a manufacturer and designer of quality and functional intake kits with excellent fit and finish and reasonable cost.

aFe enigneers their kits for each individual model application, even designing air filters from scratch to maximize the available surface area of the low pressure zone. They then offer their intake components in packages that fit your tastes and needs -
Replacement Performance Filter. A direct performance replacement filter for your stock air box.
Dynamic Air Scoops. Metal scoops or ducts that create a 'ram-air' effect to the intake.
Super Stock System. A performance filter combined with Dynamic Air Scoops and Throttle Body Spacer for power gains while keeping the OEM appearance.
Stage 1 Kit. A cone-filter kit with vehicle-specific heat shield and intake tubing to replace a stock airbox.
Stage 2 Kit. All of the components in a Stage 1 Kit plus additional intake tubing or ducting after the air box or air mass meter.
Sealed Intake. A Stage 1 or 2 Kit with an enclosed airbox and heat shield. The filter area is maximized inside a vehicle-specific airbox and then sealed with a cover for a OEM-type appearance.
For accurate results, specify your model below.
aFe Intake Kit - E9x 335i 2007-2010 (n54) - Momentum GT Stage 2 Add 16 max horsepower and 30 lbs. x ft. torque to your BMW with the N54 Turbo engine! We offer several aFe Intake Kits for the 135i 335i 535i. The benefit on this system over the less expensive systems is that it is sealed to keep engine heat out while allowing maximum air flow and a built in sight window to allow easy inpection of the filter. . The molded plastic intake box smoothly directs increased air flow for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees cooler than the factory intake. Easily accessible with a satin black powder coated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos.

Choose from Pro 5 R - oiled filter or ProDry S - dry filter. The Pro 5 R filter is aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry S" grey filter media, which is oil-free for only slightly less performance and no maintenance.

Choose from 54-82002 Pro5R kit or 51-82002 ProDryS kit

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2011 E92 BMW 335is
2007-2010 E93 BMW 335i
2011 E93 BMW 335is
2004-2010 E60 BMW 535i 535xi 535i xDrive
Part #: 54-76306-X
Price: $546.95 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - E84 X1 28i - Stage 2 Intake Pro5R or ProDry S

This Stage-2 cold air intake system for the E84 X1 28i with N20 engine, resulted in 11 max horsepower, 14 lbs. x ft. torque and out-flowed the factory intake by 47% on the 2012+ BMW X1 28i (E84) N20 Turbo. This system includes a durable 18-gauge, powder-coated heat shield and features a either a washable/reusable conical Pro 5R air filter for maximum flow or a ProDry S :oil-free" filter for maxmum convenience. The Pro 5R air filter uses five layers of progressively finer mesh cotton gauze oiled media to provide maximum airflow for best performance results. The PRO DRY S air filter uses three layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. A 3 inch one-piece mandrel bent wrinkle-black powder-coated intake tube and bracket, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
 

  • 7" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.
  • Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.
  • One-Piece Heat-Shield: The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield snaps onto the lower half of the factory air box to provide a quick and easy installation utilizing factory mounting locations.

    Choose from 54-12522 Pro5R kit or 51-12522 ProDryS kit

    This aFe intake fits the following BMWs:
    2013+ E84 BMW X1 sDrive28i X1 xDrive28i
Part #: 54-12522-X
Price: $396.95 (USD) 
aFe Pre-Filter for aFe Intake Kits # 54-10171, 54-10441 & 54-10451 Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter’s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005” or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.

This particular pre-filter is custom sized to fit the following aFe Intake Kits:
54-10171 (E36 6 Cylinder)
54-10441 (E46 323i/325i/328i/Ci 99-2003)
54-10451 (E46 330i/Ci (all) & 325i/Ci 2003-2005)
Part #: 28-10093
Price: $32.95 (USD) 
Free Shipping Free Shipping
Quantity:   
F10 535i aFe Pro DryS Stage 2 Carbon Fiber Air Intake System

This sealed intake for the N55 engine in the F10 535i produces gains of 32hp and 60ft-lbs over the stock intake. aFe has designed this system to look much like an OEM intake but yield gains that greatly improve performance. The filter included with this kit is the ProDryS oil-free synthetic filter in a rotomold CAD-engineered intake housing. No cutting or modifications are needed - this system simply replaces the stock air box. Dynamic carbon fiber accents dress up the engine bay and add a premium enhancement.

Large 3-Layer "Oil-Free" Performance Air Filter: This sealed intake system utilizes an oil-free, large 6-1/2" tall oval 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience. aFe designs every filter for the specific application (they don't reuse filters from one application to another). The unique air filter-to-housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process.

 

Part #: 51-82082
Price: $599.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - E9X 335i/xi 07-10 - Stage 2+

This intake kit replaces your restrictive factory air box. It features 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter. aFe has reported gains of 27hp and 34 lbs/ft of torque.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your 335's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.


This aFe intake fits the following BMWs:
2007-2010 E90 3 series: BMW 335i Sedan, 335is Sedan 335Xi Sedan, 335i xDrive Sedan
2007-2010 E92 3 series: BMW 335i Coupe, 335is Coupe, 335Xi Coupe, 335i xDrive Coupe
2010+ E92 3 series: BMW 335is Coupe
2006-2010 E93 3 series: BMW 335i Convertible, 335is Convertible
2010+ E93 3 series: BMW 335is Convertible
 

Part #: 54-11473
Price: $496.95 (USD) 
Free Shipping Free Shipping
Magnum FORCE Carbon Fiber Intake Scoop

AFE Summer Rebate Form

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is made of carbon fiber. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54-12218-C
Price: $99.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Dynamic Air Scoops (DAS) - F30 320i, 328i 2012+ Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). This "scoop" installs behind your front grills to direct more airflow into the factory intake snorkel used on the 2012 (and newer) F30 328i with N20 turbo engine. The scoop is a direct bolt-in install, and includes installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. F30 aFe Intake Scoop Instructions

These aFe Intake Scoops fit the following BMWs:
2012+ F30 BMW 320i, 320i xDrive, 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive - Wagon
Part #: 54-12218
Price: $49.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AFe MagnumFORCE Intake Stage-2 Pro 5R - Black

AFE Summer Rebate Form

This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

Part #: 54-81012-B
Price: $475.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - E46 323i/ci 328i/ci 325i/ci X3 2.5i - Stage 1 Pro5R Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)

This aFe intake fits the following BMWs:
1999-2000 E46 3 series : BMW 323i 323ci 328i 328ci
2001-2006 E46 3 series : 325i 325ci 325xi + Wagon & Convertible models with M54 engine
2004-2007 E83 X3 : X3 2.5i

Clickhere for installation instructions.

Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filters performance the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
Part #: 54-10441
Price: $425.00 (USD) 
Free Shipping Free Shipping
Magnum Force Stage 2 Pro AFe Intake Kit - E9X 325i/328i/330i

This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.

For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.


This aFe intake fits the following BMWs:
2008+ E82 BMW 128i
2006+ E90 3 series: 325i Sedan, 328i Sedan, 330i Sedan, 325xi Sedan, 328Xi Sedan. 328i xDrive Sedan, 330xi Sedan
2006+ E92 3 series: 328i Coupe, 328Xi Coupe, 328i xDrive Coupe
2006+ E93 3 series: 328i Convertible


Clickhere for installation instructions.

Part #: 51-11012X
Price: $466.95 (USD) 
Free Shipping Free Shipping
AFe Intake Kit - E85/E86 Z4 3.0si 06-08 - Stage 2 ProDry S "Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heatshield that blocks hot air from entering the filter. Stage 2 intake kits also feature a heat-resistant plastic-molded intake tube that smooths airflow into the throttle body, improving airflow and throttle response. Each intake kit has a custom application-specific aFe filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note.

aFe is among the first intake manufacturers to offer a dry filter option on their intake kits. The Pro Dry S filter in this intake kit has an  oil-free  filter media that flows better than stock paper filters but requires less maintenance than alternative oiled filters. For cleaning, the dry filters need only to be brushed off and cleaned with the approved aFe Restore Kit. For maximum power gains, we recommend the Pro 5 R oiled filters. The oiled filter will flow better but will need occassional re-oiling as part of a regular maintenance schedule.

This aFe intake kit fits 2006, 2007, 2008 Z4 models (E85, E86), including:
2006-08 Z4  3.0Si  Roadster, Coupe "Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heatshield that blocks hot air from entering the filter. Stage 2 intake kits also feature a heat-resistant plastic-molded intake tube that smooths airflow into the throttle body, improving airflow and throttle response. Each intake kit has a custom application-specific aFe filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note.

aFe is among the first intake manufacturers to offer a dry filter option on their intake kits. The Pro Dry S filter in this intake kit has an  oil-free  filter media that flows better than stock paper filters but requires less maintenance than alternative oiled filters. For cleaning, the dry filters need only to be brushed off and cleaned with the approved aFe Restore Kit. For maximum power gains, we recommend the Pro 5 R oiled filters. The oiled filter will flow better but will need occassional re-oiling as part of a regular maintenance schedule.

This aFe intake kit fits 2006, 2007, 2008 Z4 models (E85, E86), including:
2006-08 Z4  3.0Si  Roadster, Coupe
Part #: 51-11602X
Price: $468.95 (USD) 
Free Shipping Free Shipping
Momentum Intake System - Pro 5R

AFE Summer Rebate Form

This all new Momentum Sealed Intake System produced 10hp and 14lbs. x ft. torque and outflows the factory intake by 42%. This system uses a PRO DRY S progressive mesh three layer synthetic "oil free" filter for maximum airflow and convenience. Also included is a unique, patent pending sealed airbox design to increase airflow using the factory air ram air scoop for maximum torque in all weather situations. The kit comes complete will all necessary hardware. Note: Does not fit vehicle with N26 engine. N26 engine is SULEV (super low emission) version of N20

3-1/2"Conical Pro 5R Air Filter: This intake utilizes a huge, 3-1/2" tall conical PRO 5R performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings.

One-Piece Filter Housing: The air filter is housed in a one-piece, patent pendging black roto-molded airbox that keeps warm engine air out for maximum performance. This one-piece airbox uses factory mounting locations for a hassle-free installation.

Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.

Part #: 54-82212
Price: $495.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - Stage 2 - E60 550i, E63 650i This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, heat-block molded intake tube, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your V8's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

11.75 hp gain at 5900 rpm
10.50 lb/ft torque at 4000rpm


Clickhere for installation instructions.
Part #: 54-11142
Price: $466.95 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - E85 Z4 2.5i 03-05 - Stage 1 Pro5R Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

By removing your stock intake air box, you are removing the most restrictive portion of your Z4's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.

Installed:


Clickhere for installation instructions.

This aFe intake kit fits the 2003, 2004, 2005 Z4 2.5i (M54 engine)
Part #: 54-10651
Price: $416.95 (USD) 
Free Shipping Free Shipping
AFe Intake Kit - E46 323i/ci 328i/ci 325i/ci X3 2.5i - Stage 1 ProDry S "Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector  (Click here for more info on the Shark Injector performance software.)

This aFe intake fits the following BMWs:
1999-2000  E46 3 series : BMW 323i 323ci 328i 328ci
2001-2006  E46 3 series : BMW 325i 325ci 325xi + Wagon & Convertible models with M54 engine
2004-2007  E83 X3 : BMW X3 2.5i

Clickhere for installation instructions.

Want an extra layer of defense?  Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filters performance the smooth rush of oxygen keeps rolling right into your engine. 
Part #: 51-10441X
Price: $444.95 (USD) 
Free Shipping Free Shipping
Z4 Pro Dry S Air Intake System This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

By removing your stock intake air box, you are removing the most restrictive portion of your Z4's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

aFe is among the first intake manufacturers to offer a dry filter option on their intake kits. The Pro Dry S filter in this intake kit has an  oil-free  filter media that flows better than stock paper filters but requires less maintenance than alternative oiled filters. For cleaning, the dry filters need only to be brushed off and cleaned with the approved aFe Restore Kit. For maximum power gains, we recommend the Pro 5 R oiled filters. The oiled filter will flow better but will need occassional re-oiling as part of a regular maintenance schedule.

Installed:


Clickhere for installation instructions.

This aFe intake fits the 2003, 2004, and 2005 BMW Z4 2.5i (M54 engine).
Part #: 51-10651X
Price: $418.95 (USD) 
Free Shipping Free Shipping
Pro DryS Stage 2 Dynamic Air Intake System

AFE Summer Rebate Form

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 17 horsepower and 23 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Part #: 51-11912
Price: $425.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Throttle Body Spacer - E53 X5, E60 E63 E64 Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +5 hp, +2.5 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).
This throttle body spacer fits the following BMWs:

E60 5 series : BMW 545i 2004-2005
E63 E64 6 series : BMW 645ci, + Convertibles 2004-2005
E65 E66 7 series : BMW 745i, 745li 2002-2005
E53 X5 : BMW X5 4.4i 4.6is 2000-2006
Part #: 46-31001
Price: $199.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Dynamic Air Scoops - Red Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2007-2011  E90/E92/E93  BMW 328i & 328xi (coupe, sedan & convertible)
2007-2010  E90/E92/E93  BMW 335i & 335xi (coupe, sedan & convertible)(N54 engine only)
2008-2011  E90/E92/E93  BMW M3 (coupe, sedan & convertible)
Part #: 54-11478-R
Price: $119.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - Stage 2 Si Sealed Intake - F10 535i, F12 640i, F01 740i, F25 X3 35i

This Stage 2 Sealed Intake for BMW F10 535i with N55 turbo motor, produces 32HP, 60LBS. x FT. of torque. This sealed air intake system features a washable/reusable 6.5" tall oval air filter that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features three auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.
 

  • 6.5" Oval Air Filter - Choose either ProDry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque. This intake utilizes a huge, 6-1/2" tall Oval PRO 5R performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings.
  • One-Piece Filter Housing - The air filter is housed in a one-piece, patent pending black roto-molded airbox that keeps warm engine air out for maximum performance. This one-piece airbox has a built in clear sight window which allows you to inspect the filter with no disassembly.
  • Dyno Tested Intake Tube: - this system uses a C.A.D. designed intake tube which is dyno tuned to achieve maximum power gains while maintaining a perfect fit.
  • Housing/Air Filter Interface: This intake system features a unique patent pending filter to air box interface that creates a flawless seal.

 

This aFe intake fits the following BMWs:
2011+ F10 BMW 535i 535i xDrive
2010+ F07 BMW 535i GT, 535i xDrive GT
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
2012+ F12 BMW 640i 640i xDrive
2009+ F01 BMW 740i 740li 740li xDrive
2011+ F25 BMW X3 xDrive35i

Part #: 5X-82083
Price: $599.00 (USD) 
aFe Dynamic Air Scoops (DAS) - E82/E88 1 Series 128i & 135i - Orange Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2008, 2009 (and newer) E82 and E88 1 series BMWs, including 128i and 135i. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (135i only), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 naturally aspirated and twin turbo models (especially the 135i turbo) need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2008+  E82 1 Series Coupe  BMW 128i & 135i coupe
2008+  E88 1 Series Convertible  BMW 128i & 135i convertible
Part #: 54-11648-N
Price: $119.00 (USD) 
Quantity:   
aFe Intake Kit - E85/E86 Z4 M Roadster, Z4 M Coupe - Stage 1 Pro5R Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heatshield that blocks hot air from entering the filter. Each intake kit has a custom application-specific aFe cone filter that replaces the stock panel filter. The larger aFe Pro 5 R oiled filter, combined with the heat shield, improves airflow by 90%! By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note. Step-by-step instructions for a quick and easy install are included.
aFe reports a gain of 11hp and 10ft/lbs of torque on the Z4 M.

This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.

This aFe intake kit fits all 2006, 2007, and 2008 MZ4 including:
2006-2008 E85 MZ4 BMW M Roadster
2006-2008 E86 MZ4 BMW M Coupe
Part #: 54-11521
Price: $516.95 (USD) 
Free Shipping Free Shipping
AFe SCORCHER GT Power Package - B58 340i/ix and 440i/ix

There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly! This module is paired with the Momentum GT air intake system and restore kit to allow for as much airflow as possible.

The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos. There are other products that give more power (for additional cost and complexity) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package. 

The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hardcoat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years. 

This module features on-the-fly power adjustment using a single button controller that effortlessly adjusts from multiple modes of power control, including stock, sport, sport +, and race!

The included Momentum GT Intake features a one-piece housing with a clear window for hassle free filter inspection, a dyno-tuned intake tube designed to achieve maximum power gains, and 2 large performance air filters, Pro 5R and  Pro Dry S, that are 7.5" tall with an inverted top conical air filters and give you the choice to run an oiled or dry filter with your intake.

Features: 

  • Performance Package Includes Momentum GT air intake system + SCORCHER GT module (P/N: 77-46318) + Restore kit (P/N: 90-50501)
  • +58 HP and +83 lbs. x ft. Torque max gains
  • High Quality One-Piece Sealed Housing with Auxiliary Air Inlet
  • CAD-Designed Roto-Molded Intake Tube
  • Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
  • Includes both Pro Dry S oil-free & Pro 5R oiled, washable/reusable performance air filters
  • Unique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)
  • SCORCHER GT module increase turbo boost to improve vehicle performance, efficiency and throttle response
  • In-Cabin On-the-Fly Power Adjustments via LED light switch
  • 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red)
  • Leaves no trace on ECU (No Footprint)

Fitment:

2016+ F30/1/4 BMW 340i/ix  w/ B58 engine
2016+ F32/3/6 BMW 440i/ix  w/ B58 engine

Part #: 77-46318-PK
Price: $999.00 (USD) 
Quantity:   
aFe Dynamic Air Scoops (DAS) for E60 M5 and E63 M6 Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2006-2010 M5 and 2006+ M6. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel.
Part #: 54-11278
Price: $245.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AFe Intake Kit - E39 540i - Stage 1 ProDry S "Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

aFe has reported gains as high as 25 hp and 35 lb/ft torque for these kits, depending on application.

Clickhere for installation instructions.

Clickhere for Customer Review (detailed)

Want an extra layer of defense?  Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filters performance the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
Part #: 51-10471X
Price: $398.95 (USD) 
Free Shipping Free Shipping
aFe Dynamic Air Scoop (DAS) - E46 M3 Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoop). These scoops install behind your front grills to direct more airflow into the factory intake snorkel used on E46 M3 2001-2007. The Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel.

This aFe Intake Scoop fits the following BMWs:
2001-2007 E46 3 Series M3 M3 convertible
Part #: 54-10468
Price: $99.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Dynamic Air Scoops (DAS) - E82/E88 1 Series 128i & 135i Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2008, 2009 (and newer) E82 and E88 1 series BMWs, including 128i and 135i. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (135i only), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 naturally aspirated and twin turbo models (especially the 135i turbo) need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2008+ E82 1 Series Coupe BMW 128i & 135i coupe
2008+ E88 1 Series Convertible BMW 128i & 135i convertible
Part #: 54-11648
Price: $119.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AFe Intake Kit - F80 M3 F82/83 M4 S55 Engine

The latest generation M3 engine benefits greatly from improving the intake system. This turbo S55 engine is thirsty for more fresh, cool, dense air to assist in combustion. Reduce the power-robbing drag and decrease intake air temperatures on your F80 M3 or F82 M4 intake system by eliminating the stock BMW airbox. This AFE engineered intake system is designed to flow the most air (+46% over stock) with the least amount of restriction, dyno tested to make the best horse power and torque gains, maintain proper air filtration, decrease intake air temperatures, and have a superior fit and finish deserving of living under the hood of this latest generation M3/M4. AFE has scored yet another winning solution with this sophisticated and high tech design. We're also confident you'll enjoy the enhanced intake "growl" this intake gives the M3/M4 from under the hood -- this is performance you can actually hear when get on the accelerator.

Features:

 

  • Outflows factory intake system by 46%
  • Dual CAD-Designed Roto-Molded Intake Tubes
  • Dual One-Piece Sealed Housings with Auxiliary Air Scoops
  • Built-In Sight Windows Provides Easy Inspection of Filters Without Disassembly
  • Includes both Pro Dry S oil-free & Pro 5R oiled, washable/reusable performance air filters
  • Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
  • No Cutting or Drilling on OEM Parts for Faster Installation

Unique One-Piece Housings:

The smooth one-piece sealed housings with auxiliary air scoop are used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. Large, clear sight windows are used for a hassle-free filter inspection and an aggressive style.

 

Roto-mold Tubes:

This System uses CAD designed, dyno-tuned, roto-molded intake tubes to achieve maximum power gains while maintaining a perfect fit.

 

Large 3-Layer "Oil-Free" Performance Air Filters:

This intake system utilizes oil-free, large 5" tall conical 360 degree radial flow performance air filters with 3-Layer progressively finer porosity synthetic media for maximum convenience.

 

Large 5-Layer Performance Air Filters:

This sealed intake system utilizes pre-oiled, large 5" tall conical 360 degree radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

 

aFe install and dyno video:

 

 

 

Note: This intake system is not CARB certified at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

 

This item fits the following BMWs:

2015+ F80 BMW M3

2015+ F82 BMW M4

Part #: 52-76305X
Price: $1116.95 (USD) 
Free Shipping Free Shipping
Momentum Pro Dry S Stage 2 Air Intake System -- F10 N20 2.0L

AFE Summer Rebate Form

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 11 horsepower and 13 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Part #: 51-76303
Price: $529.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - E85/E86 Z4 3.0si 06-08 - Stage 2 Pro5R Maximum  Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heatshield that blocks hot air from entering the filter. Stage 2 intake kits also feature a heat-resistant plastic-molded intake tube that smooths airflow into the throttle body, improving airflow and throttle response. Each intake kit has a custom application-specific aFe filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note.

This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.

This aFe intake kit fits 2006, 2007, 2008 Z4 models (E85, E86), including:
2006-08 Z4 3.0Si Roadster, Coupe
Part #: 54-11602
Price: $466.95 (USD) 
Free Shipping Free Shipping
AFe Intake Kit - E82 135i 08-10 - Stage 2+ DCI ProDry S

"Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

This AFE intake kit fits the following BMWs:

2008-2010 E82 135i and 135i Convertible

Part #: 51-11643X
Price: $464.95 (USD) 
Free Shipping Free Shipping
AFe Intake Kit - Stage 1 - E39 525i/528i

 

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but the oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)

This aFe Intake kit fits the following BMWs:

E39 5 series: BMW 525i 528i 1997-2003

Clickhere for installation instructions.

Part #: 51-10601X
Price: $366.95 (USD) 
Free Shipping Free Shipping
AFe Intake Kit - Stage 2 - E46 M3

This intake kit replaces your restrictive factory air box. It features 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but the oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

This aFe intake fits the following BMWs:
E46 3 series: BMW M3 Coupe, M3 Convertible


Clickhere for installation instructions.

 

Part #: 51-10462X
Price: $446.95 (USD) 
Free Shipping Free Shipping
AFe Intake Kit - E46 323i 328i 325i 330i - Stage 2 ProDry S "Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

aFe has reported gains as high as 6 hp and 12 lb/ft torque

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector  (Click here for more info on the Shark Injector performance software.)

This aFe intake fits the following BMWs:
1999-2006  E46 BMW  323i 323ci 328i 328ci 330i 330ci 330xi
2001-2006  E46 BMW  325i 325ci 325xi - Only with M54 Engine - Not for SULEV M56 engine "Oil-Free" ProDry S Filter
Part #: 51-20442X
Price: $344.95 (USD) 
Free Shipping Free Shipping
AFe Intake KIt - Momentum GT With Carbon Fiber Accent - N55 BMW F87 M2, F30 335ix, F31/34 335i/ix, F32/33/36 435i/ix, F20/21 135i/ix, F22 M235i

HP Gain: +15hp
Trq Gain: +13ft-lbs
Airflow: +20% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

 

Fitment:

  • 2012-2015 F30 BMW 335ix  3.0L N55 
  • 2013-2015  F31/34 BMW 335i/ix 3.0L N55 
  • 2014-2016 F32/33/36 BMW 435i/ix  3.0L N55 
  • 2012-2016 F20/21 BMW M135i/ix 3.0L N55 
  • 2014-2016 F22 BMW M235i  3.0L N55
Part #: 5276311AFE
Price: $616.95 (USD) 
aFe Pro Stage 2 Dynamic Carbon Fiber Air Intake System -- E9X N52 3.0L

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 12 horsepower and 16 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Part #: 52-81013
Price: $614.95 (USD) 
Pro DryS Stage 2 Dynamic Carbon Fiber Air Intake System  --  E9X N52 3.0L

AFE Summer Rebate Form

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 12 horsepower and 16 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Part #: 52-81013-C
Price: $595.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AFE Momentum GT Pro 5R Cold Air Intake System -- B58 340i/ix 440i/ix

HP Gain: +13hp
Trq Gain: +13ft-lbs
Airflow: +28% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The B58 3.0L Turbo benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's highest-flowing filter material and design. The Pro5R filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. This intake is also available in a traditional paper filter media.

Features:

  • +13 HP and +13 lbs. x ft. Torque max gains
  • Outflows factory intake by up to 28%
  • High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
  • CAD-Designed Roto-Molded Intake Tube
  • Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
  • Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
  • Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
  • Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
  • No Cutting or Drilling on factory Parts for Faster Installation
Part #: 54-76309
Price: $549.00 (USD) 
Quantity:   
AFe Intake Kit - E39 530i - Stage 1 ProDry S Oil-Free ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector  (Click here for more info on the Shark Injector performance software.)

This aFe Intake kit fits the following BMWs:

E39 5 series : 530i 2001-2003

Click here for installation instructions.
Part #: 51-10671X
Price: $396.95 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - E53 X5 4.4i, 4.8is 00-06 - Stage 1 Pro5R Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

Clickhere for installation instructions.


This item fits the following BMWs:
2000-2006 E53 BMW X5 4.4i X5 4.8is
Part #: 54-10681
Price: $396.95 (USD) 
aFe Throttle Body Spacer - E9X 335i/xi 2011+ w N55 engine, F30 335i, F32 435i Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +6 hp, +13 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This spacer was dynoed with a aFe air filter and dynamic air scoop.

This item fits the following BMWs:
2014+ F22 BMW M235i M235i xDrive
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2012 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2012 E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
2013+ E84 BMW X1 xDrive35i
2011+ F25 BMW X3 xDrive35i
2015+ F26 BMW X4 xDrive35i
ONLY for cars with N55 twin scroll turbo engine.
Part #: 46-31007
Price: $299.00 (USD) 
Free Shipping Free Shipping
Quantity:   
F3X 328d AFE Momentum GT ProDry S Cold Air Intake System

HP Gain: +15hp
Trq Gain: +28ft-lbs
Airflow: +53% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The Diesel 328d benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in 328d intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Part #: 51-76307
Price: $499.00 (USD) 
Quantity:   
Pro DryS Stage 2 Dynamic Air Intake System

AFE Summer Rebate Form

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 11 horsepower and 15 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Part #: 51-12212
Price: $449.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - MINI Cooper S - R56 - 2011-2013

 

This Stage 2 Intake produces up to 18HP, 20 LBS. x FT of torque for the N18b16A engine. and outflows the factory intake by 49%. This sealed air intake system features a washable/reusable 360 degree conical air filter that improves airflow for increased horsepower, torque and throttle response. This intake system uses a 16 gauge steel heat shield that is positioned under the factory hood scoop to supply the air filter with cool, dense air for maximum performance.

360 Degree Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.

Top Mounted Heat Shield Design:- aFe developed this heat shield to attach onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations.

Mounts In Factory Location - aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.<

Choose from 54-12452 Pro5R kit or 51-12452 ProDryS kitbr>
This aFe intake fits the following MINIs:
2011-2013 R56 MINI MINI Cooper S
2011-2013 R57 MINI MINI Cooper S Convertible,

Part #: 54-12452-X
Price: $295.00 (USD) 
Free Shipping Free Shipping
aFe MagnumFORCE Pro Dry S Stage 2 Intake Kit - E82 128i, E9X 325i/328i/330i This Stage 2 Sealed Intake produces 12HP, 15LBS. x FT. of torque and outflows the factory intake by 56%. This sealed air intake system features a washable/reusable 6" conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.

Optional Vacuum Formed ABS Carbon Fiber Finish Cover - This intake is topped with a vacuum formed ABS carbon fiber finish cover that seals out hot intake air and provides an aggressive yet elegant look to your 3-series(pictured). Also available in plain black finish (not shown).

6" Conical Air Filter with Inverted Top - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.

Fully Sealed Design - aFe engineers have designed a very sophisticated 2-piece sealed intake that keeps out warm underhood air and brings in cooler, outside air for a denser air intake charge.

Mounts In Factory Location - aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.

Choose from 54-81012 Pro5R kit or 51-81012 ProDryS kit

This aFe intake fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive - Coupe
2007+ E93 BMW 328i - Convertible
Part #: 54-81012-X
Price: $475.00 (USD) 
aFe Intake Kit - E82 135i 08-10 - Stage 2+ DCI Pro5R Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, heat-resistant molded intake tubes, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
Part #: 54-11643
Price: $412.95 (USD) 
Free Shipping Free Shipping
F3X 328d aFe Momentum GT Pro 5R Cold Air Intake System

HP Gain: +15hp
Trq Gain: +28ft-lbs
Airflow: +53% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The Diesel 328d benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in 328d intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's highest-flowing filter material and design. The Pro5R filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. This intake is also available in a traditional paper filter media.

Part #: 54-76307
Price: $499.00 (USD) 
Quantity:   
aFe Intake Kit - E53 X5 3.0i - Stage 1 Pro5R This intake kit replaces the upper half of your factory air box. It features 1.6mm powder-coated steel heat shield, molded intake tub, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing the stock intake internals, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

Clickhere for installation instructions.
Part #: 54-10691
Price: $366.95 (USD) 
Free Shipping Free Shipping
AFe Intake Kit - E53 X5 3.0i - Stage 1 ProDry S "Oil-Free" ProDry S Filter

This intake kit replaces the upper half of your factory air box. It features 1.6mm powder-coated steel heat shield, molded intake tub, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing the stock intake internals, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

Clickhere for installation instructions.
Part #: 51-10691X
Price: $368.95 (USD) 
Free Shipping Free Shipping
AFe Intake Kit - E60 M5, E63 M6 - Stage 2 ProDry S "Oil-Free" ProDry S Filter

Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of  28hp  and  24 ft/lbs of torque . The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.

Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.

This aFe Cold Air Intake Kit fits the following BMWs:
2006,2007,2008,2009  E60 M5  Sedan
2006,2007,2008,2009  E63 M6  Coupe
2006,2007,2008,2009  E64 M6  Convertible

Clickhere for installation instructions.
Part #: 51-11272X
Price: $818.95 (USD) 
Free Shipping Free Shipping
AFE Momentum GT Pro DRY S Cold Air Intake System -- B58 340i/ix 440i/ix

HP Gain: +13hp
Trq Gain: +13ft-lbs
Airflow: +28% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The B58 3.0L Turbo benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Features:

  • +13 HP and +13 lbs. x ft. Torque max gains
  • Outflows factory intake by up to 28%
  • High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
  • CAD-Designed Roto-Molded Intake Tube
  • Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
  • Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
  • Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
  • Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
  • No Cutting or Drilling on factory Parts for Faster Installation
Part #: 51-76309
Price: $549.00 (USD) 
Quantity:   
Momentum Pro Stage 2 Air Intake System - F10 528i N20

 Features:

  • +11 HP / +13 lbs. x ft. Torque max gains
  • Outflows factory intake system by 31%
  • CAD-Designed Roto-Molded Intake Tube
  • One-Piece Sealed Housing with Auxiliary Air Scoop
  • Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
  • Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance OR Pro DRY S oil-free 3-Layer Progressively Finer Porosity Synthetic Media for Maximum Convenience
  • Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation

Unique One-Piece Housing:
The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included if you want to block the auxiliary air scoop. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

Huge 5-Layer Performance Air Filter:
The Momentum intake is designed around a pre-oiled, large 7-1/2" Tall oval top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
Premium clamps are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This item fits the following BMWs:
2012+ F10 BMW 528i 528i xDrive

 

Part #: 54-76303
Price: $529.00 (USD) 
Dynamic Air Scoops - Blue Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2007-2011  E90/E92/E93  BMW 328i & 328xi (coupe, sedan & convertible)
2007-2010  E90/E92/E93  BMW 335i & 335xi (coupe, sedan & convertible)(N54 engine only)
2008-2011  E90/E92/E93  BMW M3 (coupe, sedan & convertible)
Part #: 54-11478-L
Price: $119.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Stage 2 AFe Intake Kit - E60 525i/530i 04-05 This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but the oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Part #: 51-11572X
Price: $366.95 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - E39 M5 - Stage 2 This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and much less maintenance.

By converting your stock intake air boxes, you are improving the most restrictive portion of your M5's intake system, increasing horse power by 10 hp , torque by 10 lb/ft , improving acceleration as well as throttle response.

10hp max gain, 10 lb/ft torque max gain

Clickhere for installation instructions.
Part #: 54-10852
Price: $716.95 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - F30 328i F32 428i F22 228i - Stage 2 Intake Pro5R or ProDry S

This Stage-2 cold air intake system for the F30 328i with N20 engine, resulted in 11 max horsepower, 15 lbs. x ft. torque and out-flowed the factory intake by 38% on the 2012+ BMW 328i (F30) N20 Turbo. This system includes a durable 18-gauge, powder-coated heat shield and features a either a washable/reusable conical Pro 5R air filter for maximum flow or a ProDry S :oil-free" filter for maximum convenience. The Pro 5R air filter uses five layers of progressively finer mesh cotton gauze oiled media to provide maximum airflow for best performance results. The PRO DRY S air filter uses three layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. A 3 inch one-piece mandrel bent wrinkle-black powder-coated intake tube and bracket, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

  • 7" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.
  • Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.
  • One-Piece Heat-Shield: The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield snaps onto the lower half of the factory air box to provide a quick and easy installation utilizing factory mounting locations.
  • Optional Intake Cover-Interested in reducing air intake noise on your 5X-12212 stage-2 intake for the 2012-2014 BMW 328i (F30)? aFe Power now offers an intake cover to do just that. This lightweight vacuum form plastic cover bolts right up to the intake housing and comes with all necessary hardware, no modification is necessary.

Choose from 54-12212 Pro5R kit or 51-12212 ProDryS kit

This aFe intake fits the following BMWs:
2014+ F22 BMW 228i 228i xDrive
2012+ F30 BMW 320i 320i xDrive 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive - Wagon
2014+ F32 BMW 428i Coupe & Convertible, 428i xDrive Coupe & Convertible
Only for cars with N20 engine

Part #: 54-12212-X
Price: $466.95 (USD) 
aFe Throttle Body Spacer - E36 325i 328i M3 The Silver Bullet throttle body spacer creates turbulence in the air flow just prior to entry into the engine increasing horsepower, torque and improving throttle response. In recent dyno testing by aFe, this throttle body spacer produced +4hp and +8lbs. x ft. torque (measured on E36 M3 with S52 engine) . The Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. Great power per dollar performance.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Part #: 46-31004
Price: $199.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - MINI Cooper S - Manual Transmission 02-06 - Stage 2 Pro5R AFE Summer Rebate Form
Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box to give you more power and better throttle response. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. Heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

Click here to view installation instructions

This aFe cold air intake fits the following MINIs:
2005-2008 R52 MINI MINI Cooper S Convertible.
2002-2006 R53 MINI MINI Cooper S
Manual Transmission Only!
Part #: 54-10572-1
Price: $275.00 (USD) 
Quantity:   
aFe Throttle Body Spacer - E46 325i The Silver Bullet throttle body spacer creates turbulence in the air flow just prior to entry into the engine increasing horsepower, torque and improving throttle response. In recent dyno testing by aFe, this throttle body spacer produced +10hp and +14lbs. x ft. torque . The Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. Great power per dollar performance.

This item fits the following BMWs:
2001-2005 E46 BMW 325i 325ci 325xi
Part #: 46-31008
Price: $199.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AFe Intake Kit - E85/E86 Z4 M Roadster, Z4 M Coupe - Stage 1 ProDry S "Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heatshield that blocks hot air from entering the filter. Each intake kit has a custom application-specific aFe cone filter that replaces the stock panel filter. The larger aFe filter, combined with the heat shield allows more air to flow to the engine. By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note. Step-by-step instructions for a quick and easy install are included.  aFe reports a gain of 11hp and 10ft/lbs of torque on the Z4 M.

aFe is among the first intake manufacturers to offer a dry filter option on their intake kits. The Pro Dry S filter in this intake kit has an  oil-free  filter media that flows better than stock paper filters but requires less maintenance than alternative oiled filters. For cleaning, the dry filters need only to be brushed off and cleaned with the approved aFe Restore Kit. For maximum power gains, we recommend the Pro 5 R oiled filters. The oiled filter will flow better but will need occassional re-oiling as part of a regular maintenance schedule.

This aFe intake kit fits all 2006+ MZ4 including:
2006-2008  E85 MZ4  BMW M Roadster
2006-2008  E86 MZ4  BMW M Coupe
Part #: 51-11521X
Price: $518.95 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - F30 335i F32 435i 2012+ - Stage 2 Si Sealed Intake Pro5R or ProDry S

This Stage 2 Sealed Intake for BMW F30 335ii with N55 turbo motor, produces 11HP, 15LBS. x FT. of torque and outflows the factory intake by 37%. This sealed air intake system features a washable/reusable 7.5" conical air filter that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features three auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.

  • 7.5" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque. This intake utilizes a huge, 7-1/2" tall conical PRO 5R performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings.
  • One-Piece Filter Housing - The air filter is housed in a one-piece, patent pending black roto-molded airbox that keeps warm engine air out for maximum performance. This one-piece airbox has a built in clear sight window which allows you to inspect the filter with no disassembly.
  • Dyno Tested Intake Tube: - this system uses a C.A.D. designed intake tube which is dyno tuned to achieve maximum power gains while maintaining a perfect fit.
  • Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.
  • Housing/Air Filter Interface: This intake system features a unique patent pending filter to air box interface that creates a flawless seal.

 

Choose from 54-82202 Pro5R kit or 51-82202 ProDrys kit.


This aFe intake fits the following BMWs:
2014+ F22 BMW M235i M235i xDrive
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe

Part #: 5X-82202
Price: $529.00 (USD) 
aFe Intake Kit - F22 228i, F30 328i, and F32 428i - Stage 2 Sealed Intake Pro5R or ProDry S

This Stage 2 Sealed Intake for BMW F30 328i and F32 428i with N20 turbo motor, produces 10HP, 14LBS. X FT. of torque and outflows the factory intake by 42%. This sealed air intake system features a washable/reusable 6" conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.
 

  • 3.5" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.
  • Fully Sealed Design - The air filter is housed in a one-piece, patent pending, black roto-molded air box that keeps warm engine air out for maximum performance.
  • Mounts In Factory Location - aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
  • Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.
  • Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.
  • Please choose either N20 ULEV (ultra low emission vehicle) or N26 SULEV (Super Low Emission Vehicle). The N26 engine was optional in markets with stricter emissions standards such as California and New York.

    Choose from 54-82212 Pro5R kit or 51-82212 ProDryS kit

    This aFe intake fits the following BMWs:
    2014+ F22 BMW 228i 328i xDrive
    2012+ F30 BMW 320i 320i xDrive 328i 328i xDrive - Sedan
    2013+ F31 BMW 328i xDrive - Wagon
    2014+ F32 BMW 428i Coupe & Convertible, 428i xDrive Coupe & Convertible
Part #: 54-82212-X
Price: $512.95 (USD) 
AFe Intake Kit - E36 323/325/328/M3 - Stage 2 ProDryS E36 323/325/328/M3 intake with US 3.0" HFM
E36 M3 intake with Euro 3.5" HFM
Pro Dry S filter for maximum flow with a paper material


This air intake system produces up to 15 horsepower, 20 lbs. x ft. torque and out-flows the factory intake by up to 80%. Included in this system is a "oil free" conical air filter that uses three layers of progressive weave synthetic media for maximum convenience. The filter is constructed with 100% polyurethane for long life. This intake system also features a rotomolded tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This intake system incorporates a unique coupling that smoothens the air transition into the intake tract, and also allows this kit to fit on both US and EURO Mass Air Flow Sensors. A one-piece black powder-coated heat shield requires little to no assembly for a hassle free installation.

5 Tall Conical Pro Dry S Air Filter: This intake utilizes a huge, 5" tall conical Pro Dry S performance air filter for increased performance. This 3-layer progressive, synthetic material air filter requires no oils and cleans with water and a brush for maximum convenience.

One-piece precision cut heat shield: The air filter is housed in a one-piece, black powdercoated 1.6mm heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all hardware for a hassle-free installation.

Compatible with most aftermarket HIDs: This system was designed to clear larger style HID headlight housings.

One kit to Fit Both US and Euro HFMs: aFe has re-engineered their systems so that the same kit is used for either the US or Euro HFM. The filter and tubing was optimized for use with the 3.5" HFM and a special adapter was engineered to work with the stock 3.0" HFM. This is a bonus for cars with the stock HFM as they get the larger filter and intake tract!
Note: on cars with a 3.5" HFM an adapter is required to fit the HFM to the stock throttle body boot. Select this from the options below.
If you are removing the factory ASC traction control we recommend getting the Samco Silicone Intake Boot. Select this from the options below.

Please note:  If you are planning to use a 3.5" HFM on your 1995 M3, be SURE you are using the correct software and fuel injectors.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

This item fits the following BMWs:
1992-1999  E36 BMW  323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1995-1999  E36 BMW  M3 with Euro/540 or Porsche 3.5" HFM
Part #: 51-12392X
Price: $368.95 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - F30 335i F32 435i 2012+ - Stage 2 Intake Pro5R or ProDry S This aFe Stage 2 cold air intake system for BMW F30 335i and F32 435i with the N55 engine, produces 14 max horsepower, 18 lbs. x ft. torque and out-flowed the factory intake by 29%. This system includes a durable 18-gauge, powder-coated heat shield and features either a washable/reusable conical Pro 5R filter for maximum flow or a Pro Dry S filter for lower maintenance requirements. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge 3.5 inch one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling. 

Filter Flange Retention Design:  
The air filter uses a unique (patent pending) flange retention design that requires no hardware to mount the filter to the heat shield to provide a quick hassle-free installation with minimal hardware. 

One-Piece Intake Tube:  
A large mandrel-bent intake tube is used to smoothly direct the increased air flow into the engine for maximum performance. 

6" Tall Conical Filter:  Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque. This intake utilizes a huge, 6" tall conical performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. 

One-Piece Filter Housing:  The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all hardware for a hassle-free installation. 

Easy Installation:  aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations. 

Dyno Tested Intake Tube:  The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response. 

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. 

Choose from 54-12202 Pro5R kit or 51-12202 ProDrys kit. 

This item fits the following BMWs:  
2014+  F22 BMW  M235i M235i xDrive 
2012+  F30 BMW  335i 335i xDrive - Sedan 
2013+  F32 BMW  435i 435i xDrive - Coupe 
Part #: 5X-12202
Price: $466.95 (USD) 
Stage 1 AFe Intake Kit - E60 545i, E63 645ci 04-05 This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but the oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Part #: 51-11081X
Price: $362.95 (USD) 
Free Shipping Free Shipping
Magnum FORCE Intake Scoop - Blue

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is blue for a more noticeable appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54-12218-L
Price: $49.00 (USD) 
Quantity:   
Dynamic Air Scoops - Grey Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2007-2011  E90/E92/E93  BMW 328i & 328xi (coupe, sedan & convertible)
2007-2010  E90/E92/E93  BMW 335i & 335xi (coupe, sedan & convertible)(N54 engine only)
2008-2011  E90/E92/E93  BMW M3 (coupe, sedan & convertible)
Part #: 54-11478-GR
Price: $119.00 (USD) 
Quantity:   
aFe Intake Kit - E36 323/325/328/M3 - Stage 2 Pro5R E36 323/325/328/M3 intake with US 3.0" HFM
E36 M3 intake with Euro 3.5" HFM
Maxiumum Flow Pro5R Filter


This air intake system produces up to 20 horsepower, 25 lbs. x ft. torque and out-flows the factory intake by up to 80%. Included in this system is a washable/reusable conical air filter that uses five layers of oiled cotton gauze filter for maximum performance. This intake system also features a rotomolded tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This intake system incorporates a unique coupling that smoothens the air transition into the intake tract, and also allows this kit to fit on both US and EURO Mass Air Flow Sensors. A one-piece black powder-coated heat shield requires little to no assembly for a hassle free installation.

5 aFe conical filter: aFe has maximized the space available in the E36 engine compartment to fit the largest available cone filter. For maximum flow and the highest horsepower gain, the Pro 5R oiled cotton gauze filter is used. The Pro 5R is a 5-layer progressive layered, oiled cotton gauze material that allows maximum air flow while trapping dust and dirt. It's a re-useable filter that needs only a shake and rinse to be cleaned and occasional re-oiling. This kit is also available with a maintenance free paper filter.

One-piece precision cut heat shield: The air filter is housed in a one-piece, black powdercoated 1.6mm heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all hardware for a hassle-free installation.

Compatible with most aftermarket HIDs: This system was designed to clear larger style HID headlight housings.

One kit to Fit Both US and Euro HFMs: aFe has re-engineered their systems so that the same kit is used for either the US or Euro HFM. The filter and tubing was optimized for use with the 3.5" HFM and a special adapter was engineered to work with the stock 3.0" HFM. This is a bonus for cars with the stock HFM as they get the larger filter and intake tract!
Note: on cars with a 3.5" HFM an adapter is required to fit the HFM to the stock throttle body boot. Select this from the options below.
If you are removing the factory ASC traction control we recommend getting the Samco Silicone Intake Boot. Select this from the options below.

Please note: If you are planning to use any 3.5" HFM on your E36 M3, be SURE you are using the correct set of injectors and software too.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1995-1999 E36 BMW M3 with Euro/540 or Porsche 3.5" MAF
Part #: 54-12392
Price: $349.00 (USD) 
Free Shipping Free Shipping
Dynamic Air Scoops - Green Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2007-2011  E90/E92/E93  BMW 328i & 328xi (coupe, sedan & convertible)
2007-2010  E90/E92/E93  BMW 335i & 335xi (coupe, sedan & convertible)(N54 engine only)
2008-2011  E90/E92/E93  BMW M3 (coupe, sedan & convertible)
Part #: 54-11478-GN
Price: $119.00 (USD) 
Quantity:   
aFe Momentum Intake Kit - F10 M5 2012+, F12 M6, F06 M6 Part #: 54-76301 Pro5R standard oiled filters (recommended)
Part #: 51-76301 Pro Dry S non-oiled /dry filters

Introducing the all new afe Momentum sealed intake system for the F10 M5 2012-2014. This all new Momentum intake system produced up to 28hp and 31lbs. X ft. torque and outflows the factory intake by 29%. This highly engineered intake system uses twin black rotomolded airboxes that keeps warm engine air out for maximum performance. The housing use a unique Patent Pending filter to housing interface that enables us to use the largest filters possible while maintaining a simple hassle-free installation. The C.A.D. designed intake tubes are engineered to unleash all available horsepower and to fit perfectly. The kit comes complete will all necessary hardware.

Twin Rotomolded Sealed Airbox Design: The highly engineered sealed airboxes are designed to enhance the aesthetic look of the engine bay and to unleash maximum performance by capturing the coolest air intake charge available.

Housing/Air Filter Interface: This intake system features a unique patent pending filter to housing interface which allows for an easy installation and maximizes filter size.

Silicone Coupling: Reinforced silicone couplings are used to connect the tubes to the turbo inlet adaptors for strength and durability.

Dual 6-1/2" Tall Conical Air Filters: This intake utilizes dual, 6-1/2" tall conical filter. Choose from Pro5R oiled filter or ProDryS dry filter. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Auxiliary Air Inlets: This system picks up cold air from the factory air inlet and secondary auxiliary air port.

Choose from 54-76301 Pro5R kit or 51-76301 ProDrys kit.

This item fits the following BMWs:
2012+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe
Part #: 5X-76301
Price: $1516.95 (USD) 
aFe Intake Kit - E9X M3 - Stage 2 Pro5R The latest generation M3 V8 engine benefits greatly from improving the intake system. This high-revving 4.0 liter S65 engine is thirsty for more fresh, cool, dense air to assist in combustion. Reduce the power-robbing drag and decrease intake air temperatures on your E90 or E92 M3 intake system by eliminating the stock BMW M3 airbox. This AFE engineered intake system is designed to flow the most air (+85% over stock) with the least amount of restriction, dyno tested to make the best horse power and torque gains, maintain proper air filtration, decrease intake air temperatures, and have a superior fit and finish deserving of living under the hood of this latest generation V8 M3 V8. AFE has scored yet another winning solution with this sophisticated and high tech design. We're also confident you'll enjoy the enhanced intake "growl" this intake gives the M3 from under the hood -- this is performance you can actually hear when get into the accelerator.

+15 hp / +13 ft-lbs

This kit features a CAD designed intake tube system, which is tuned for optimum flow in the space provided. A large 6 inch diameter AFE Pro5R filter is used for optimal air flow and impeccable filtration of even the smallest micron particles. This E9X M3 intake also has a full fabricated 6061 aluminum cover and housing, which is power coated in a matte-black to have a more a more "stealth" (yet race inspired) look.

The kit installs easily around 30 to 40 minutes, using standard tools, and is 100% bolt on -- no cutting, no drilling and no modifications. It comes complete with installation instructions (with photos), and is a straight-forward do it yourself install. This kit simply has it all -- performance, sound, appearance, and ease of installation.

This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 sedan
2008+ E92 BMW M3 coupe
2008+ E93 BMW M3 convertible
Part #: 50-11662-BV
Price: $729.00 (USD) 
aFe D.A.S. Carbon Fiber Intake Scoops - F10 M5 2012+, F12 M6, F06 M6 The Dynamic Air Scoop (D.A.S.) from aFe is a very simple bolt-on product that increases airflow and velocity into the air intake through the factory kidney bean grille. This scoop is constructed of carbon fiber for reduced weight, greater strength and aggressive styling. This scoop is a perfect addition to a cold air intake installation.

Lower Intake Air Temperature:
Dynamic Air scoops lower intake air temperatures by forcing more cool air from the front grille into the factory intake snorkel.

Carbon Fiber D.A.S Scoop:
This Dynamic Air Scoop is constructed with lightweight high gloss clear-coated 2 x 2 Twill Weave Carbon Fiber For Heat Protection.

Hassle Free Installation:
All necessary hardware is included for an easy, hassle free installation.

This item fits the following BMWs:
2012+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe
Part #: 54-12489-C
Price: $199.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Dynamic Air Scoops - Orange Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2007-2011  E90/E92/E93  BMW 328i & 328xi (coupe, sedan & convertible)
2007-2010  E90/E92/E93  BMW 335i & 335xi (coupe, sedan & convertible)(N54 engine only)
2008-2011  E90/E92/E93  BMW M3 (coupe, sedan & convertible)
Part #: 54-11478-N
Price: $119.00 (USD) 
Quantity:   
AFe Intake Kit - E53 X5 4.4i, 4.8is 00-06 - Stage 1 ProDry S Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

Clickhere for installation instructions.

Want an extra layer of defense?  Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filters performance the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

This item fits the following BMWs:
2000-2006  E53 BMW  X5 4.4i X5 4.8is
Part #: 51-10681X
Price: $398.95 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - E82 135i 11-12, E9X 335i/xi 11-13 - Stage 2 Pro5R This BMW 335i air intake system removes the restrictive factory air box. aFe claims 17 max horsepower, 23lbs. x ft. torque and out-flowed the factory intake by 44% on the awesome BMW N55 E90, E92, E93 and E82, E88 135i . This system includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical Pro 5R air filter for maximum flow. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. aFe # 54-11912

Choose from Pro5R oiled filter for maximum flow or ProDry S oil-free filter media for maximum convenience.

Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media

ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Choose from 54-11912 Pro5R kit or 51-11912 ProDryS kit

This item fits the following BMWs:
2011+ E82 BMW 135i
2011+ E90 BMW 335i 335xi 335i xDrive
2011+ E92 BMW 335i 335xi 335i xDrive
2011+ E93 BMW 335i
2013+ E84 BMW X1 xDrive35i
Part #: 54-11912X
Price: $466.95 (USD) 
aFe Intake Kit - E46 323i/ci 328i/ci 325i/ci 330i/ci - Stage 2 Pro5R Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

aFe has reported gains as high as 6 hp and 12 lb/ft torquei

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)

This aFe intake fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2006 E46 BMW 325i 325ci 325xi - Only with M54 Engine - Not for SULEV M56 engine
Part #: 54-20442
Price: $342.95 (USD) 
Free Shipping Free Shipping
Torque Booster Tube - Black This Torque Booster tube is a great upgrade to your Stage 1 air intake, and can even be used to upgrade your factory intake system. Constructed of 3-ply silicone, it's smoother for less turbulence and more durable for less maintenance.
Part #: 54-10469-B
Price: $99.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - E39 525i/528i - Stage 1 Pro5R This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)

Clickhere for installation instructions.

Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filters performance the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
Part #: 54-10601
Price: $349.00 (USD) 
AFe Intake Kit - Stage 1 - E46 325i/Ci M56, 330i/Ci All, E83 X3 3.0i This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

 For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but the oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

aFe has reported gains as high as 20 hp and 27 lb/ft torque on the 330i

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector  (Click here for more info on the Shark Injector performance software.)

This aFe intake fits the following BMWs:
2003-2006  E46 3 series : BMW 325i 325ci 325xi + Wagon & Convertible models with M56 engine
2001-2006  E46 3 series : BMW 330i 330ci 330xi + Convertible
2004-2007  E83 X3 : X3 3.0i

Clickhere for installation instructions.
Part #: 51-10451X
Price: $442.95 (USD) 
Free Shipping Free Shipping
aFe Intake Tube - E36 M3 (for upgraded 3.5 inch HFM) (Retains ASC) Our new intake boot for E36 M3 with S52 engine and 3.5" Euro HFM retains the stock ASC option while providing a full diameter tube to connect the HFM to the throttle body. Often the 3.5" HFM is used with the a reducer to fit onto the stock intake boot. This upgraded intake boot does not use the reducer which results in greater air flow to the throttle body.

This upgrade kit retains the ASC throttle body when upgrading to a 3.5" EURO MAF sensor. This coupling upgrade was designed to work with aFe’s P/N: 51-12392 / 54-12392, but it can also be used with other competitors intakes. The coupling is constructed of polyurethane for strength and durability. This engineered coupling upgrade increases air flow and velocity by controlling the air intake dynamics. This is a very simple bolt-on product and requires no cutting or drilling.

This item fits the following BMWs:
1996-1999 E36 BMW M3, M3 convertible
Part #: 54-12399
Price: $49.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AFe MagnumFORCE Stage-2 Pro DRY S "Oil-Free" ProDry S Filter

This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Part #: 51-12202
Price: $449.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit Stage 2 Pro5R -- E9X M3 The latest generation M3 V8 engine benefits greatly from improving the intake system. This high-revving 4.0 liter S65 engine is thirsty for more fresh, cool, dense air to assist in combustion. Reduce the power-robbing drag and decrease intake air temperatures on your E90 or E92 M3 intake system by eliminating the stock BMW M3 airbox. This AFE engineered intake system is designed to flow the most air (+85% over stock) with the least amount of restriction, dyno tested to make the best horse power and torque gains, maintain proper air filtration, decrease intake air temperatures, and have a superior fit and finish deserving of living under the hood of this latest generation V8 M3 V8. AFE has scored yet another winning solution with this sophisticated and high tech design. We're also confident you'll enjoy the enhanced intake "growl" this intake gives the M3 from under the hood -- this is performance you can actually hear when get into the accelerator.

+15 hp / +13 ft-lbs

This kit features a CAD designed intake tube system, which is tuned for optimum flow in the space provided. A large 6 inch diameter AFE Pro5R filter is used for optimal air flow and impeccable filtration of even the smallest micron particles. This E9X M3 intake also has a full fabricated 6061 aluminum cover and housing, which is power coated in a matte-black to have a more a more "stealth" (yet race inspired) look.

The kit installs easily around 30 to 40 minutes, using standard tools, and is 100% bolt on -- no cutting, no drilling and no modifications. It comes complete with installation instructions (with photos), and is a straight-forward do it yourself install. This kit simply has it all -- performance, sound, appearance, and ease of installation.

This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 sedan
2008+ E92 BMW M3 coupe
2008+ E93 BMW M3 convertible
Part #: 50-11662-B
Price: $729.00 (USD) 
F87 M2 AFe POWER BladeRunner GT Series Intercooler

Looking to give your N55 motor a little more room to breathe? This performance intercooler from aFe is exactly what you need to help lower manifold intake air pressure and allow up to 15% more total air volume to flow through your intake, leading to increase numbers in both torque and horsepower!

Features:

  • Outflows factory intercooler up to 15%
  • Lowers manifold intake air temperature
  • 2-1/2" Billet aluminum inlet and outlet for superior strength & durability
  • Incorporates the factory style quick connections for intercooler tubes
  • 5" Bar and plate core design that is 29% larger than stock
  • This intercooler is 100% TIG-Welded by certified craftsmen for strength and durability
  • 1/8" NPT ports are provided on the back of the intercooler for connecting pressure sensors or water methanol injection
  • Absolutely no cutting or modifications are needed for the installation of this intercooler kit

    Looking to give your N55 motor a little more room to breathe? This performance intercooler from aFe is exactly what you need to help lower manifold intake air pressure and allow up to 15% more total air volume to flow through your intake, leading to increase numbers in both torque and horsepower!

    Features:

  • Outflows factory intercooler up to 15%
  • Lowers manifold intake air temperature
  • 2-1/2" Billet aluminum inlet and outlet for superior strength & durability
  • Incorporates the factory style quick connections for intercooler tubes
  • 5" Bar and plate core design that is 29% larger than stock
  • This intercooler is 100% TIG-Welded by certified craftsmen for strength and durability
  • 1/8" NPT ports are provided on the back of the intercooler for connecting pressure sensors or water methanol injection
  • Absolutely no cutting or modifications are needed for the installation of this intercooler kit
Part #: 46-20271
Price: $1165.50 (USD) 
Quantity:   
aFe Intake Kit - E82 135i 11-12, E9X 335i/xi 11-13 - Stage 2 Pro5R This BMW 335i air intake system removes the restrictive factory air box. aFe claims 16 max horsepower, 26lbs. x ft. torque and out-flowed the factory intake by 32% on the awesome BMW N55 E90, E92, E93 and E82, E88 135i . This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. Included in this air intake system are BOTH a washable/reusable conical Pro 5R air filter for maximum flow and a ProDry S oil free filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)

Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media

ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

This item fits the following BMWs:
2011+ E82 BMW 135i
2011+ E90 BMW 335i 335xi 335i xDrive
2011+ E92 BMW 335i 335xi 335i xDrive
2011+ E93 BMW 335i
2013+ E84 BMW X1 xDrive35i
Part #: 52-31912
Price: $299.00 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - E9X M3 - Stage 2 Factory Intake with Pro5R & ProDry S

This unique intake system is designed to use the factory intake box to seal the intake tube and filter and tube against unwanted underhood temperatures while increasing air flow and velocity for optimum performance. This air intake system features either a ProDry S or Pro5R air (choose below), a dyno tuned intake tube and all the hardware necessary for an easy installation. This Stage 2 air intake system produces 12 horsepower, 9lbs. X ft. torque and out-flowed the factory intake by 41%. This system is truly a silent killer.

Choose the optional Carbon Fiber intake tube to reduce weight and enhance the visual appearance of the engine bay. The carbon fiber intake tube features a high gloss clear-coated 2 x 2 Twill Weave Carbon Fiber For Heat Protection, the tube is shaped to maintain factory fit and function.

Choose from Pro5R oiled filter for maximum flow or ProDry S oil-free filter media for maximum convenience.

Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media.

video: E9x M3 aFe Intake Installation

 

ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 Sedan
2008+ E92 BMW M3 Coupe
2008+ E93 BMW M3 Convertible

 

Part #: 54-31662
Price: $425.00 (USD) 
Free Shipping Free Shipping
aFe Silicone Intake Tube Upgrade - E46 M3 aFe offers this silicone intake tube to replace the accordian-style stock boot. The silicone tube is completely smooth inside, unlike the stock boot that causes turbulent air. aFe measured a 128% increase in flow and 10hp gain with this tube alone. This tube can be used with the stock intake air box or with the aFe Stage 1 cold air intake. This is a very simple bolt-on product using hose clamps and requires no cutting or drilling. Available in a stealthy black or bright blue.

This item fits the following BMWs:
2001-2006  E46 BMW  M3, M3 convertible
Part #: 54-10469
Price: $99.00 (USD) 
Free Shipping Free Shipping
aFe Restore Kit for ProDry S Dry Filters This eco-friendly air filter cleaner is for the aFe Pro Dry S performance air filter. Simply spray on and wash off and your Pro Dry S air filter is good to go. Please follow the instrucctions with the kit and you will have a lifetime of horsepower.
Part #: 90-59999
Price: $19.95 (USD) 
Free Shipping Free Shipping
Quantity:   
Magnum FORCE Intake Scoop - Red

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is red for a more noticeable appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54X12208-R
Price: $49.00 (USD) 
Quantity:   
aFe Throttle Body Spacer - E9X 335i, E82 135i, E60 535i (N54 engine) Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency - +6 hp, +3.5 lbs/ft torque . Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).

Only for cars with N54 engine. Not for cars with N55 engine.

This throttle body spacer fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive- Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
Part #: 46-31002
Price: $199.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - Stage 2 - E85 Z4 3.0i 06-08 This Stage 2 cold air intake system produces 18 max horsepower, 15 lbs. x ft. torque over the factory intake. This intake uses a durable, one-piece, 16 gauge, black powder-coated heat shield and a 3-angle adaptor for maximum flow. This air intake system features either a washable/reusable conical Pro 5R air filter for maximum flow or Pro Dry S filter for maximum convenience. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This system is finished off with a black powdercoated top for an aggressive, yet stealthy appearance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note.

Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media

ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

This aFe Intake fits the following BMWs:
2006-2008 Z4 BMW Z4 3.0i - not for 3.0Si
Part #: 54-11942
Price: $442.95 (USD) 
Free Shipping Free Shipping
aFe Throttle Body Spacer - E60 550i E63 650i E53 X5 4.8is Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +10 hp, +14 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2). Click here for installation instructions

This item fits the following BMWs:
2004-2010 E60 BMW 550i
2004-2010 E63 BMW 650i
2002-2008 E65 BMW 750i 750li
2004-2006 E53 BMW X5 4.8is
Part #: 46-31006
Price: $199.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Dynamic Air Scoops (DAS) - E82/E88 1 Series 128i & 135i - Red Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2008, 2009 (and newer) E82 and E88 1 series BMWs, including 128i and 135i. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (135i only), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 naturally aspirated and twin turbo models (especially the 135i turbo) need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2008+  E82 1 Series Coupe  BMW 128i & 135i coupe
2008+  E88 1 Series Convertible  BMW 128i & 135i convertible
Part #: 54-11648-R
Price: $119.00 (USD) 
Quantity:   
aFe Intake Kit - E39 540i - Stage 1 Pro5R Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

aFe has reported gains as high as 25 hp and 35 lb/ft torque for these kits, depending on application.

Clickhere for installation instructions.

Clickhere for Customer Review (detailed)

Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filters performance the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
Part #: 54-10471
Price: $253.93 (USD) 
$379 (Sale - Save 33%)
Free Shipping Free Shipping
aFe Restore Kit for Pro5R Oiled Filters

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Part #: 55-10460
Price: $17.95 (USD) 
Quantity:   
Magnum FORCE Intake Scoop - Blue

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is blue for a more noticeable appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54X12208-L
Price: $49.00 (USD) 
Quantity:   
aFe Intake Kit - E39 530i - Stage 1 Pro5R Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)

Click here for installation instructions.
 
Part #: 54-10671
Price: $396.95 (USD) 
aFe Dynamic Air Scoops (DAS) - E9X 328i/335i/M3 Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2007-2011 E90/E92/E93 BMW 328i & 328xi (coupe, sedan & convertible)
2007-2010 E90/E92/E93 BMW 335i & 335xi (coupe, sedan & convertible)(N54 engine only)
2008-2011 E90/E92/E93 BMW M3 (coupe, sedan & convertible)
Part #: 54-11478
Price: $99.00 (USD) 
Free Shipping Free Shipping
Quantity:   
AFe Intake Kit - E82 135i, E9X 335i/xi, E60 535i/xi - Stage 2 DCI ProDry S "Oil-Free" ProDry S Filter

Increase horse power and torque in your twin-turbo charged BMW 135i, 335i, 335xi, 535i or 535xi with this twin-filter element aFe cold air intake system. aFe has reported gains of 27hp and 34 ft/lbs of torque with this kit, which increases airflow 98% over the stock airbox. Installs in under an hour!

The aFe Intake system is one of the easiest and most effective ways to increase your BMW's performance. The kit includes all parts and installation instructions to replace the restrictive factory air box with a low-restriction, high-flow filtering system. The kit includes a one-piece precision molded twin intake tube, 16 gauge powder coated steel heat shield, and gasket -- all assisting in blocking out hot engine air for cooler, denser air mass.

This aFe Intake Kit fits the following BMWs:
2007-2010  E90 3 Series Sedan  - BMW 335i & 335xi
2007-2010  E92 3 Series Coupe  - BMW 335i & 335xi
2010+  E92 3 Series Coupe  - BMW 335is
2008-2010  E82 1 Series Coupe  - BMW 135i
2011+  E82 1 Series Coupe  - BMW 1M Coupe
2008-2010  E88 1 Series Convertible  - BMW 135i
2007-2010  E60 5 Series  - BMW 535i & 535xi
Part #: 51-11472X
Price: $412.95 (USD) 
Free Shipping Free Shipping
aFe Dynamic Air Scoops (DAS) - E82/E88 1 Series 128i & 135i - Green Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2008, 2009 (and newer) E82 and E88 1 series BMWs, including 128i and 135i. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (135i only), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 naturally aspirated and twin turbo models (especially the 135i turbo) need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2008+  E82 1 Series Coupe  BMW 128i & 135i coupe
2008+  E88 1 Series Convertible  BMW 128i & 135i convertible
Part #: 54-11648-GN
Price: $119.00 (USD) 
Quantity:   
aFe Pre-Filter for aFe Intake Kit # 54-12392 Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter’s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005” or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.

This particular pre-filter is custom sized to fit the following aFe Intake Kits:
54-12392 (E36 6 Cylinder)
Part #: 28-10103
Price: $27.95 (USD) 
Free Shipping Free Shipping
Quantity:   
AFe Intake Kit - Stage 1 - E85 Z4 3.0i 03-05 This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

By removing your stock intake air box, you are removing the most restrictive portion of your Z4's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

aFe is among the first intake manufacturers to offer a dry filter option on their intake kits. The Pro Dry S filter in this intake kit has an  oil-free  filter media that flows better than stock paper filters but requires less maintenance than alternative oiled filters. For cleaning, the dry filters need only to be brushed off and cleaned with the approved aFe Restore Kit. For maximum power gains, we recommend the Pro 5 R oiled filters. The oiled filter will flow better but will need occassional re-oiling as part of a regular maintenance schedule.

Clickhere for installation instructions.

This aFe intake fits the 2003, 2004, 2005 BMW BMW Z4 3.0i (M54 engine)
Part #: 51-10661X
Price: $416.95 (USD) 
Free Shipping Free Shipping
AFe Intake Kit - E60 525i/530i 06-07 - Stage 2 ProDry S "Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your 5 series' intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

Clickhere for installation instructions.
Part #: 51-11042X
Price: $444.95 (USD) 
Free Shipping Free Shipping
aFe Intake Kit - E60 525i/530i 06-07 - Stage 2 Pro5R Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your 5 series' intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

Clickhere for installation instructions.
Part #: 54-11042
Price: $466.95 (USD) 
Free Shipping Free Shipping
aFe Dynamic Air Scoops (DAS) - E82/E88 1 Series 128i & 135i - Blue Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2008, 2009 (and newer) E82 and E88 1 series BMWs, including 128i and 135i. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (135i only), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 naturally aspirated and twin turbo models (especially the 135i turbo) need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2008+  E82 1 Series Coupe  BMW 128i & 135i coupe
2008+  E88 1 Series Convertible  BMW 128i & 135i convertible
Part #: 54-11648-L
Price: $119.00 (USD) 
Quantity:   
Magnum FORCE Intake Scoop  --  F30/32/33 335i/xi 435i/xi F87 M2

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is black for a stealth appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54-12208
Price: $49.00 (USD) 
Free Shipping Free Shipping
Quantity:   
Magnum FORCE Intake Scoop - Red

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is red for a more noticeable appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Part #: 54-12218-R
Price: $49.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - E60 M5, E63 M6 - Stage 2 Pro5R Maximum Flow Pro5R Filter

Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of 28hp and 24 ft/lbs of torque . The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.

Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

This aFe Cold Air Intake Kit fits the following BMWs:
2006,2007,2008,2009 BMW E60 M5 Sedan
2006,2007,2008,2009 BMW E63 M6 Coupe
2006,2007,2008,2009 E64 M6 Convertible

Clickhere for installation instructions.
 
Part #: 54-11272
Price: $816.95 (USD) 
aFe Dynamic Air Scoops (DAS) - E82/E88 1 Series 128i & 135i - Grey Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2008, 2009 (and newer) E82 and E88 1 series BMWs, including 128i and 135i. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (135i only), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 naturally aspirated and twin turbo models (especially the 135i turbo) need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2008+  E82 1 Series Coupe  BMW 128i & 135i coupe
2008+  E88 1 Series Convertible  BMW 128i & 135i convertible
Part #: 54-11648-GR
Price: $119.00 (USD) 
Quantity:   
aFe Carbon Fiber Dynamic Air Scoops (DAS) - F30 335i 2012+, F32 435i Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). This "scoop" installs behind your front grills to direct more airflow into the factory intake snorkel used on the 2012 (and newer) F30 335i with N55 turbo engine. The scoop is a direct bolt-in install, and includes installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. F30 335i aFe Intake Scoop Instructions

These aFe Intake Scoops fit the following BMWs:
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible - Convertible
Part #: 54-12208-C
Price: $99.00 (USD) 
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - Z3 2.8 97-99 This Stage 1 cold air intake system produces 4 max horsepower, 5 lbs. x ft. torque over the factory intake. This intake uses a durable, one-piece, 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system incorporates a unique 3-angle filter adapter that smooths air transition into the intake tract for better performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. This air intake system features either a washable/reusable conical Pro 5R air filter for maximum flow or Pro Dry S filter for maximum convenience.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note.

Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media

ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Choose from 54-11951 Pro5R kit or 51-11951 ProDryS kit

This item fits the following BMWs:
1997-1999 Z3 BMW Z3 2.8i
Part #: 54-11951X
Price: $342.95 (USD) 
Free Shipping Free Shipping
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.