The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from leading to vacuum leak engine codes, rough idle, and increase fuel consumption. 

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot 13717536004.

Features:

• 5 layers of wire reinforced silicone
• Perfect fitment with factory airbox
• Compatible with single stage or three stage manifold
• Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Flexible silicone smooths the intake tract while allowing for a range of performance intakes fitments. The ultimate in durability!

In most vehicle applications, the rubber intake elbow found in the intake system is not designed for performance or modification. They were designed to get the job done but when you add a performance filter, intake or tune, the stock elbow will start to show it weakness. The stock rubber elbows disrupt air flow as it passes over the accordion sections causing unwanted turbulence and negating the effects of intake modifications.

With high quality 4 ply construction, the Turner intake boot is strong but flexible, ensuring a secure fit on an OEM or aftermarket intake system. A smooth interior ensures unimpeded airflow, while a smooth, unassuming exterior adds to any engine bay.

Benefits:

Improved throttle response,
Increase induction sound
Increased power output - and power output, Best when paired with an ECS drop-in air filter.(ES4461001 or ES4460965)

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Introducing the newly developed 100% silicone, four-ply fiber reinforced intake hose by M7 Speed, designed for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly improved airflow, and an almost unlimited service life. Besides its outstanding performance, it adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.77” (45mm) ID at the turbo inlet.
• Easy DIY installation.

Upgrade your BMW E36 Z3 M52 S52 engine's air intake system with the Turner Motorsport Genuine Air Intake Hose. This crucial hose, situated between the mass airflow sensor and the throttle body inlet, is prone to cracking over time, leading to lean conditions and decreased engine performance.

• Genuine BMW part ensures quality and compatibility
• Prevents air leaks and maintains proper air-fuel mixture
• Enhances engine performance and throttle response
• Direct replacement for easy installation

Karbonius E46 M3 CSL (S54) Carbon Snorkel - 2x2 Weave and Matte Finish

Karbonius E46 M3 CSL (S54) Carbon Snorkel - 2x2 Weave and Matte Finish is the ultimate performance and style upgrade for BMW E46 M3 enthusiasts. This high-quality carbon fiber snorkel is designed to replicate the renowned CSL design, enhancing airflow efficiency and engine performance while providing a sleek, race-inspired aesthetic. Made with a premium 2x2 carbon fiber weave and finished with a durable matte coating, it offers the perfect balance of form and function. Available through Turner Motorsport, this component ensures authenticity and precision engineering for the discerning BMW owner.

Key Benefits

• Precision-crafted for seamless fitment on BMW E46 M3 models
• Improves airflow for optimized S54 engine performance
• Constructed with a 2x2 carbon fiber weave for superior strength and lightweight durability
• Matte finish adds a modern, sporty aesthetic to the engine bay
• Inspired by the legendary CSL design for an authentic motorsport upgrade
• Available exclusively from trusted BMW performance specialists, Turner Motorsport

Elevate your E46 M3’s performance and style with the Karbonius E46 M3 CSL (S54) Carbon Snorkel - 2x2 Weave and Matte Finish, a must-have for enthusiasts aiming to achieve the ultimate driving experience.