Find Parts That Fit Your Vehicle

Home
Drivetrain
Drivetrain Mounts and Upgrades

Drivetrain Mounts and Upgrades

From the factory, engine and transmission mounts are rubber and thus a wear component. Worn out engine or transmission mounts create sloppiness and a disconnect between the driver and your BMW's powerplant. If your vehicle is purpose built for the track, we recommend solid engine and transmission mounts. These have zero deflection, but come at the expense of added NVH (noise, vibration, and harshness). Poly engine and transmission mounts offer a good balance between OEM rubber and solid mounts for those with mixed purpose vehicles, offering great performance and connection with little sacrifice in terms of NVH.

Sub-Categories

Sort By:

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

Condor Speed Shop Street Polyurethane Transmission Mount - E10 2002 1...

T#:577575

Part#: PLYE10TRANS

Ships in 3 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30

T#:577565

Part#: S14M

Ships in 2 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

T#:597365

Part#: TRANSIX_F2XF3X

In Stock at Vendor

$ 34.00 USD

Add to Wish List

Qty

$ 34.00 USD

Add to Wish List

These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.

Show More Show Less

Poly Transmission Mount Set

T#:597363

Part#: TRANSIX_E39P

Ships in 2 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.

Show More Show Less

F9X X3/4M Billet Diff Lock Down Kit

T#:26404860

Part#: VTT-F9X-LDK

Back Ordered

Starting at $ 314.99 USD

Add to Wish List

Starting at $ 314.99 USD

Add to Wish List

VTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 differential bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less

E30, E24, E28 Manual Transmission Mounts (Pair)

T#:360170

Part#: 23711175939KT1

Ships in 6 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

E30, E24, E28 Transmission Mount (pair) for manual transmissions. These are standard replacement mounts to replace mounts worn out or suffering transmission mount failure. There are two per car, and this listing includes two (2) transmission mounts to do the job right.

This manual transmission mount fits the follow BMW:
1986-1989 E24 6 Series 633Csi, 635Csi (Getrag 260 Manual Trans)
1986-1988 E28 5 Series 528e, 533i, 535i, 535is (Getrag 260 Manual)
1984-1992 E30 3 Series 325e, 325es, 325i, 325is, 325ic

Show More Show Less

Elring Differential Axle Seal - E30 E36 E28 E34 E24 E23 E32 Z3 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:369495

Part#: 33107505602

In Stock

$ 9.64 USD

Add to Wish List

Qty

$ 9.64 USD

Add to Wish List

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
E30 318i/is 325e 325i/ix M3
E36 318i/ic/is/ti 323i/is 325i/is 328i/is M3
E28 524td 528e 533i 535i
E34 525i 530i 535i
E24 633CSi 635CSi
E23 733i 735i
E32 735i/iL
Z3 1.9 2.5 2.5i 2.8 3.0i M Coupe/Roadster

Show More Show Less

Billet Diff Lock Down Kit

T#:21176906

Part#: VTT-A9X-DLD

In Stock

Sale - Save 7% $ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

Sale - Save 7%

$ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

VTT noticed a hole in the A9X/Z4 market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. Vargas went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced. You will need a Riv-nut tool to install the Riv-nuts as one is not included. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less

Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine M...

T#:577943

Part#: E36HS

Ships in 5 Business Days

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Condor's Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat and up to 450 degrees F of direct heat. The extra protection of the heat sleeves is a perfect fit for street cars, track cars, and other high heat applications. Their mounts withstand temperatures up to 180 degrees F and do not need any heat protection during regular usage, but we recommend the extra protection of their sleeves for all vehicles with high underhood heat temperatures such as turbo and supercharged vehicles. Condor heat sleeves can be easily installed by simply slipping the sleeve around the engine mount and securing using the Velcro tabs. *LISTING IS FOR ONE HEAT SHIELD **Heat sleeve fitment is for Condor Engine Mounts only.

Project Cars

SELECT YOUR BMW

Drivetrain Mounts and Upgrades

Sub-Categories

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

Condor Speed Shop Street Polyurethane Transmission Mount - E10 2002 1...

Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

Poly Transmission Mount Set

F9X X3/4M Billet Diff Lock Down Kit

E30, E24, E28 Manual Transmission Mounts (Pair)

Elring Differential Axle Seal - E30 E36 E28 E34 E24 E23 E32 Z3 ...

Billet Diff Lock Down Kit

Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine M...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results