Find Parts That Fit Your Vehicle

Subframe Bushings

Your BMWs subframe bushings were designed to mitigate vibration and harshness. When mileage accumulates these bushings dry out, crack, and eventually split. When this happens vibrations and noise increase. Turner Motorsport carries Genuine BMW and high quality aftermarket alternatives that will restore lost handling and comfort.
Sort By:

Rear Subframe Bushings/Mount Set - Turner Solid Aluminum - E82 1M, E9X M3
Turner Motorsport - Corporate Logo
T#:4402
Part#: TDR9080SRS
In Stock
Sale - Save 15% $309.95
$263.46
Free Shipping
Sale - Save 15% $309.95
$263.46
Free Shipping
Solid rear subframe bushings for all E90 M3 & E92 M3, suggested for track/racing use only. Designed and manufactured by TMS using knowledge from many years of successful professional racing in Grand-Am Sports Car Challenge, SCCA Speed World Challenge, BMW Club, and SCCA club racing.

A BMW's rear subframe is the heart of the suspension. When the subframe moves, so do all the suspension mounting points. Replacing the stock rubber bushings with solid ones limits both drivetrain and suspension movement, eliminating the unwanted movement and keeping your BMW's setup the way it should be. These solid mounts will also help prevent the subframe from tearing out of the chassis on your E90/E92 3 series. We spend lots of extra time machining each TMS subframe mount to keep your car as light as possible. CNC machined from high grade billet aluminum for precision and quality. These solid aluminum subframe bushings are for racing applications only, and can be used on all E90 M3 & E92 M3.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2012 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible
Show More Show Less
Rear Subframe Bushings/Mounts - Set - Stock M3 Rubber - E82, E9X
Genuine BMW - Corporate Logo
T#:12061
Part#: TMS12061
In Stock
$287.80
Free Shipping
The subframe is the heart of a BMW's rear suspension. Nearly all of the suspension arms and bushings mount to the chassis through the subframe. So as the suspension deflects forces from the tires, the subframe eventually absorbs them all. Preventing too much deflection and twist in the subframe will keep your handling and alignment consistent. The stock E82 and E90/E92 rear sub-frame mounts are very soft so putting more torque through the car results in a soft or loose (squirrely) feeling in the rear suspension. This set of 4 mounts are from the M3 and are much stiffer.

These M3 rear subframe bushings are a direct replacement upgrade over the stock mounts. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well. The time and effort needed to replace them is well worth it, especially on high-horsepower cars (tuned N54, N55, etc).

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
OEM Lemforder Rear Subframe Bushing - E53 X5
Lemforder - Corporate Logo
T#:363181
Part#: 33316770454
Expected Ship Date: Jun 25, 2021
$30.41
Free Shipping on orders $49 and up

Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Powerflex Polyurethane Rear Subframe Rear Position Bushing Set - E46
Powerflex - Corporate Logo
T#:362732
Part#: PFR5-4611X2
Inventory On Order, ETA Jun 25, 2021
$131.29
Free Shipping

Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

 

Show More Show Less

Rear Subframe Bushings/Mount Set - Turner Solid Aluminum - E82, E9X
Turner Motorsport - Corporate Logo
T#:1452
Part#: TDR9080SS3
In Stock
Sale - Save 15% $309.95
$263.46
Free Shipping
Sale - Save 15% $309.95
$263.46
Free Shipping

A BMWs sub-frame is the heart of the suspension - as the subframe twists and shifts under load all of the suspension mounting points also move. The rear suspension feels loose and lacks precision. As rubber or hydroelastic bushings wear the bushing deflection gets worse. If you have a highly tuned 335i/xi you're putting even more strain on weak bushings. The solution is a stiffer and more durable material. Even BMW has moved to solid mounts on the F10 M5 and F8X M3/M4. These fully solid E82/E90/E92 aluminum mounts have zero deflection - the subframe does not move at all. The rest of the suspension can work as designed and maintain the proper alignment and motion ratios. The driver will notice the difference as the car is more stable and the handling is more precise.

Although we designed these for use in our racecars, they can work on the street so long as the driver can tolerate some additional noise, vibration, and harshness. These mounts are CNC machined in the USA and made with high-grade aluminum. The set is for all four subframe mounts.

These solid rear sub frame mounts fit: 
2008-2012 E82 BMW 128i 135i 
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan 
2006-2011 E91 BMW 325i 328i - Wagon 
2007-2012 E92 BMW 328i 335i 335is - Coupe 
2007-2012 E93 BMW 328i 335i - Convertible 

Show More Show Less