Create an account to be able to build Wish Lists.
BMWs are well-known for their problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E9X N55 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.
With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E82/88 and E90/92/93 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!
To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.
Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your N55-equipped BMW today and drive with confidence!
Features & Benefits:
Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Kit Includes:
Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose Aluminum Coolant Bleeder Screw Ball Stud 6mm Fitting Expansion Tank Cap Coolant Level Sensor Product Development:
Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
Installation:
To aid in the installation process, we've assembled a start-to-finish installation guide, including detailed instructions on removing your factory cooling expansion tank and associated components.
Click HERE for Installation Instructions
Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.
The Turner Motorsport Level 1 Performance Cooling System Refresh Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.
Our comprehensive "Level 1" High-Performance Cooling System Service Kit includes:
Turner Motorsport Heavy Duty Aluminum Expansion Tank Pierburg Full Aluminum Water Pump ECS Aluminized Water Pump Hose V2.0 Bremmen Parts Thermostat Bremmen Upper Radiator Hose (17127540127) Lower Cooling Hose (17127599450) Genuine BMW Blue G48 Antifreeze (2 Gallons) Redline Water Wetter (12 oz.)
The N54/N55 are the powerhouses of BMW, one of the most common tuning platforms, and a fan favorite for spirited driving. Being an N54/N55 owner you know that oil temps can get out of hand leaving you with an anxious feeling and the needle a little too close to the red on your gauge cluster. What if you could get the oil flowing faster, maintain lower temperatures, and still have proper engine warm-up?
Upgrade your N54/N55 engine with our Billet oil cooler housing, replacing the underperforming factory-cast aluminum unit. Engineered for enhanced performance and a blended aesthetic, our Turner oil cooler housing features an OEM+ black anodized finish and our own engineered lower-temperature thermostat. Unlike makeshift solutions like thermostat bypass kits, our housing integrates an OE thermostat, ensuring a gradual yet expedited engine warm-up process, similar to factory settings but faster.
Out goes the factory 110-degree Celsius (230F) thermostat, replaced by our 70-degree Celsius (158F) counterpart. This new thermostat triggers oil flow a significant 72 degrees Fahrenheit earlier than the factory version. This early flow translates into prolonged lower oil temperatures for both the oil cooler and engine, maintaining a happier, healthier engine with consistently lower operating temperatures.
For N54 owners seeking to use the full potential of their tuned or modified engines, our upgraded housing and thermostat are must-have additions, especially for those who frequent the track or enjoy spirited drives on winding roads. Even if you're not pushing your motor to its limits, this upgrade significantly enhances reliability. With rising oil temperatures, the risk of oil breakdown rises, resulting in compromised lubrication, more engine deposits, and increased wear over time. Our solution addresses these concerns, protecting your engine's longevity and performance, regardless of your driving style.
For vehicles equipped with the factory oil cooler, our housing offers a multitude of advantages and is a direct replacement for the OEM unit. If your vehicle lacks a factory oil cooler, this presents an ideal chance to upgrade your setup with our housing, enabling the addition of a factory cooler for enhanced performance and increased reliability. Our primary objective is to maintain optimal oil temperatures, ensuring proper lubrication for the engine's internal components, in turn prolonging their lifespan.
Features:
Thermostat - 40 degrees Celsius/ 72 degrees Fahrenheit lower than the factory unit Billet aluminum to replace the raw cast aluminum factory housing Optional cooler capability for cars without an OEM oil cooler Utilizes the lower temp thermostat to circulate oil sooner rather than an always open solution which inhibits warm-up Combine with OEM oil cooler to add cooling capacity to your FBO N54/N55 or replace the stock housing for a cooling upgrade using your existing cooler Replaceable thermostat and gaskets for easy maintenance Quick easy installation Kit Contents:
N54/N55 Billet Thermostat Housing Billet thermostat cover Low-temp thermostat Thermostat spring Housing and thermostat cover gaskets 2 Oil cooler line O-rings (17222245358) Product Development:
Our upgraded oil cooler housing was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
