Hartge Engine Performance Upgrade - F30 328i, E89 Z4 28i, F10 528i 12-, F25 X3 28i (N20 Engine)
PLUG IN AND PLAY WITH POWER!
HP gain = 45 hp
Trq gain = 48 ft-lbs
Plug And Play Engine Harness!
More Boost With Factory Driveability!
This Power Pack is a direct plug in to the existing engine harness for a factory appearance and fitment and an instant 45hp gain. It installs in under two hours and is completely reversible which makes this the easiest and most cost-effective power upgrade you will ever make on this car.
video: F30 328i w/ Hartge Power Upgrade
The Hartge 'Engine Conversion' is a bespoke tuning module that plugs in ahead of the engine computer on the wiring harness. It has factory-style plugs to connect in-line with the water temp sensor, fuel rail pressure, turbo boost pressure sensors, turbo wastegate valve, intake camshaft sensor, 12V power and ground. The module then sends a modified signal to the engine computer allowing it to increase boost by varying amounts depending on load, engine speed, and other factors.
All of the factory safeguards remain in place, including overload protection, warm-up protocols, and the engine tuning is unchanged below 1500 rpm to preserve all factory driveability. One of the key advantages of this type of 'piggyback' system is that it is unaffected by factory BMW updates and service. If BMW updates the computer software to fix any small bugs or issues, the Hartge performance upgrade is not lost or overwritten. This is key on a new model like the F30 because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained.
Installation instructions: Click here for F30 328i installation instructions (note: paper size is Euro A1 size).
This item fits the following BMWs:
2012+ F30 BMW 328i - Sedan
2012+ F10 BMw 528i
2011+ F25 BMW X3 xDrive28i
2012+ E89 BMW Z4 sDrive28i
HP gain = 45 hp
Trq gain = 48 ft-lbs
Plug And Play Engine Harness!
More Boost With Factory Driveability!
This Power Pack is a direct plug in to the existing engine harness for a factory appearance and fitment and an instant 45hp gain. It installs in under two hours and is completely reversible which makes this the easiest and most cost-effective power upgrade you will ever make on this car.
video: F30 328i w/ Hartge Power Upgrade
The Hartge 'Engine Conversion' is a bespoke tuning module that plugs in ahead of the engine computer on the wiring harness. It has factory-style plugs to connect in-line with the water temp sensor, fuel rail pressure, turbo boost pressure sensors, turbo wastegate valve, intake camshaft sensor, 12V power and ground. The module then sends a modified signal to the engine computer allowing it to increase boost by varying amounts depending on load, engine speed, and other factors.
All of the factory safeguards remain in place, including overload protection, warm-up protocols, and the engine tuning is unchanged below 1500 rpm to preserve all factory driveability. One of the key advantages of this type of 'piggyback' system is that it is unaffected by factory BMW updates and service. If BMW updates the computer software to fix any small bugs or issues, the Hartge performance upgrade is not lost or overwritten. This is key on a new model like the F30 because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained.
Installation instructions: Click here for F30 328i installation instructions (note: paper size is Euro A1 size).
This item fits the following BMWs:
2012+ F30 BMW 328i - Sedan
2012+ F10 BMw 528i
2011+ F25 BMW X3 xDrive28i
2012+ E89 BMW Z4 sDrive28i
T#:
16422
|
Part#:
11280245
Qty
Hartge Engine Performance Upgrade - F30 328i, E89 Z4 28i, F10 528i 12-, F25 X3 28i (N20 Engine)
This part does not have vehicle applications yet. For fitment verification, contact our sales team via
1.800.280.6966,
Live Chat
Text Us!
, or
[email protected].
Text Us!
, or
[email protected].
Product Details
PLUG IN AND PLAY WITH POWER!HP gain = 45 hp
Trq gain = 48 ft-lbs
Plug And Play Engine Harness!
More Boost With Factory Driveability!
This Power Pack is a direct plug in to the existing engine harness for a factory appearance and fitment and an instant 45hp gain. It installs in under two hours and is completely reversible which makes this the easiest and most cost-effective power upgrade you will ever make on this car.
video: F30 328i w/ Hartge Power Upgrade
The Hartge 'Engine Conversion' is a bespoke tuning module that plugs in ahead of the engine computer on the wiring harness. It has factory-style plugs to connect in-line with the water temp sensor, fuel rail pressure, turbo boost pressure sensors, turbo wastegate valve, intake camshaft sensor, 12V power and ground. The module then sends a modified signal to the engine computer allowing it to increase boost by varying amounts depending on load, engine speed, and other factors. All of the factory safeguards remain in place, including overload protection, warm-up protocols, and the engine tuning is unchanged below 1500 rpm to preserve all factory driveability. One of the key advantages of this type of 'piggyback' system is that it is unaffected by factory BMW updates and service. If BMW updates the computer software to fix any small bugs or issues, the Hartge performance upgrade is not lost or overwritten. This is key on a new model like the F30 because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained.
Installation instructions: Click here for F30 328i installation instructions (note: paper size is Euro A1 size).
This item fits the following BMWs:
2012+ F30 BMW 328i - Sedan
2012+ F10 BMw 528i
2011+ F25 BMW X3 xDrive28i
2012+ E89 BMW Z4 sDrive28i
Prop 65 Warning
- 11280245
