Spark Plug Socket - 2006+ N54/N55 BMW 6 Cylinder Engines

If you are replacing OEM spark plugs on a 2006 or newer 6 cylinder turbo then you most likely need this socket 3/8 drive socket tool which works on the 12-point non-standard spark that came on most N54 engines. This very slim-walled 12 point socket allows you to use a standard 3/8 drive socket wrench & extension to remove and install factory BMW spark plugs on the N54 based engines, as found on all E90 and E92 335i and all 2006+ E60 535i, Z4 3.5i, with turbo motor. Many aftermarket and replacement spark plugs for these engines still use the standard 6 point style plugs, so if you are removing or installing a set of aftermarket plugs (Bosch, NGK, etc) a standard 6 point will likely work.

If you're changing the original set of spark plugs on any of the following BMWs listed (below), you will most likely need this socket (if in doubt, please check your existing plugs, to avoid restocking fees on returned tools). This socket also has internal guides, which help keep the spark plug aligned with the socket, making the job easier. We also recommend the spark plug installer, part#83300496065, which allows you to guide the spark plug down the into the head of the engine, as well as a either a torque wrench or the BMW torque adapter tool (part# 83300491130) to apply the proper torque to each spark plug (23nm or 17 lb-ft).

2008+ E82 BMW 135i
2006+ E90 BMW 335i 335xi 335i xDrive
2007+ E92 BMW 335i 335is 335xi 335i xDrive
2007+ E93 BMW 335i
2004-2010 E60 BMW 535i 535xi 535i xDrive
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is

Assenmacher Specialty Tools
T#: 1737 | Part#: 83300495560
22.64 $22.64
Spark Plug Socket - 2006+ N54/N55 BMW 6 Cylinder Engines