Turner Motorsport 12x1.5 55mm Full Thread Wheel Stud - Most BMWs (E30, E36, E46, E90, E92 etc)

Wheel studs are among the safest and beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go. With studs you won't have to worry about dropping your expensive wheels onto the brake rotor.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)
These wheel studs are the same as our hugely popular Bullet Nose studs but with threads along the full length of the stud. This gives you more threaded area for tightening wheel nuts or allows the use of a closed-end wheel nut. These also have a more OEM appearance. Although these are a lower cost version of our Bullet Nose studs, they are every bit as strong, durable, and safe. The Bullet Nose is an upgrade because it's easier to install and almost impossible to cross-thread a nut.

Turner Full-Thread Wheel Stud Features:

Black magnesium phosphorous corrosion resistant coating

Long shank for good brake rotor alignment

Heat-treated aircraft-quality alloy steel

55mm is a very short wheel stud. Refer to our detailed measurements in the image below. You have to ensure that enough of the stud is sticking out from the hub to fit with: your brake rotor hat and wheel thickness, plus at least 10mm of nut engagement. For a longer stud, see our 75mm and 90mm full-thread stud.



Sold per stud.