As most 335 owners have discovered, the cooling system is vital to maintaining high levels of boost. The car's sophisticated electronics wisely shut down and limit boost when temperatures are elevated enough to do potential harm. Don't short-change your cooling system or performance on the street or the track! Where the stock radiator suffers is in capacity, which is why BMW also sells an additional radiator and other cooling upgrades with their Performance packages. This radiator for the E90/E92 335 and E82 135/1M is a larger 40mm core (2mm thicker than stock) for additional capacity and bulletproof cooling. It fits in the stock location, with the stock shroud and fan (some plastic trimming may be necessary), maximizing the available space to dedicate to fluid capacity and surface area. Having a greater capacity means less saturation time for the cooling fluid which leads to more consistent engine temperatures, reducing the possibility of limp mode condition and reducing wear and tear on other cooling components such as the water pump and thermostat. If you're looking for the most complete and unbeatable radiator solution for your E9X, this is the best we have seen.
Not only is this radiator larger, but it's also designed with the stresses of motorsports in mind. The cooling vanes use a unique oven-brazed bonding technology that will not fatigue and crack like epoxyed construction. Aircraft-grade aluminum is used for the tanks and frame, which are TIG-welded for superior strength. This radiator is a direct replacement for the stock E9X radiator, with all of the same hose locations and fittings as the original radiator. Because of the extra depth required between the radiator and engine, extra care will be needed when installed with upgraded intercoolers, intake piping, and oil coolers.
This aluminum radiator is a replacement for the stock BMW radiator 17 11 7 558 480 and fits the 135i and 335i/xi (automatic transmission only).
This item fits the following BMWs:
2008-2012 E82 BMW 135i 1M Coupe - with auto transmission only
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan - with auto transmission only
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe - with auto transmission only
2007-2013 E93 BMW 335i - Convertible - with auto transmission only
2009+ Z4 BMW Z4 28i Z4 35i
WARNING! Prop 65 may apply to this product.
Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California.
Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.
For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
As most 335 owners have discovered, the cooling system is vital to maintaining high levels of boost. The car's sophisticated electronics wisely shut down and limit boost when temperatures are elevated enough to do potential harm. Don't short-change your cooling system or performance on the street or the track! Where the stock radiator suffers is in capacity, which is why BMW also sells an additional radiator and other cooling upgrades with their Performance packages. This radiator for the E90/E92 335 and E82 135/1M is a larger 40mm core (2mm thicker than stock) for additional capacity and bulletproof cooling. It fits in the stock location, with the stock shroud and fan (some plastic trimming may be necessary), maximizing the available space to dedicate to fluid capacity and surface area. Having a greater capacity means less saturation time for the cooling fluid which leads to more consistent engine temperatures, reducing the possibility of limp mode condition and reducing wear and tear on other cooling components such as the water pump and thermostat. If you're looking for the most complete and unbeatable radiator solution for your E9X, this is the best we have seen.
Not only is this radiator larger, but it's also designed with the stresses of motorsports in mind. The cooling vanes use a unique oven-brazed bonding technology that will not fatigue and crack like epoxyed construction. Aircraft-grade aluminum is used for the tanks and frame, which are TIG-welded for superior strength. This radiator is a direct replacement for the stock E9X radiator, with all of the same hose locations and fittings as the original radiator. Because of the extra depth required between the radiator and engine, extra care will be needed when installed with upgraded intercoolers, intake piping, and oil coolers.
This aluminum radiator is a replacement for the stock BMW radiator 17 11 7 558 480 and fits the 135i and 335i/xi (automatic transmission only).
This item fits the following BMWs: 2008-2012 E82 BMW 135i 1M Coupe - with auto transmission only 2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan - with auto transmission only 2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe - with auto transmission only 2007-2013 E93 BMW 335i - Convertible - with auto transmission only 2009+ Z4 BMW Z4 28i Z4 35i
WARNING! Prop 65 may apply to this product.
Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.
For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Prop 65 Warning
Product Q&A
Lifetime Replacement
This Product Is Covered By Our Lifetime Replacement Program
Products protected by our Lifetime Replacement Program are covered for as long as you own the product, no need to worry about an expiration date. Purchase your products and enjoy some worry-free motoring, knowing we've got you covered.
If you have any questions, would like to learn more or are ready to place a replacement claim, click here!
Fits These Cars
MAKE
MODEL
SUBMODEL
ENGINE
Special Fitment Notes
BMW
E82
1 M Coupe
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E82
135i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E82
135i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E88
135i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E88
135i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335xi
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335xi
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335is
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335xi
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335xi
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E93
335i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E93
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E93
335is
N54 3.0L
Use vehicle selector to confirm fitment
BMW
Z4
sDrive35i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
Z4
sDrive35is
N54 3.0L
Use vehicle selector to confirm fitment
*The above product applications have been written by Turner Motorsport. All
warranties, product application, fitment, and performance are the responsibility of Turner Motorsport.
For additional information see the terms of use.