Orange RS 4-4: Racing - This compound has a very goodfade resistance and a higher average friction value than the RS 4-2. It is rotor friendly with predictable, non-aggressive friction behavior (stable torque). Fading resistance up to 560C (1.050F). It is a very good rear compound for Touring Car applications in combination with RS 29 or RS 19 Yellow front pads. It is used on either Short Track or Long Distance. It is also used on BMWShowroom Stock, all other Touring-Cars and Single- Seater up to F3.
Yellow RS 29: Racing New endurance compound. This compound combines the outstanding wear rate of the RS19 with a slightly higher coefficient of friction and initial bite. Due to its outstanding wear rate and driveability, PAGID endurance materials are often used at sprint races as well.
Black RS 14: Racing - This is a medium high friction value ceramic type compound with very good modulation, high fade resistance, low heat conductivity, and a good wear rate up to a temperature of 650C (1.200F). It is kind on discs, with visible grooving, but a limitation of hairline cracks. Applications include NASCAR, CART, F3, Touring cars, GT cars, WSC, Trans Am and Rally.
Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brakepads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad. These Front Pagid Brake Pads fit the following BMWs: 1995-1998 E36 BMW M3 2001-2006 E46 BMW M3 1989-1995 E34 BMW 525i 530i 535i 540i M5 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1997-2002 Z3 BMW M Roadster M Coupe
Orange RS 4-4: Racing - This compound has a very goodfade resistance and a higher average friction value than the RS 4-2. It is rotor friendly with predictable, non-aggressive friction behavior (stable torque). Fading resistance up to 560C (1.050F). It is a very good rear compound for Touring Car applications in combination with RS 29 or RS 19 Yellow front pads. It is used on either Short Track or Long Distance. It is also used on BMWShowroom Stock, all other Touring-Cars and Single- Seater up to F3.
Yellow RS 29: Racing New endurance compound. This compound combines the outstanding wear rate of the RS19 with a slightly higher coefficient of friction and initial bite. Due to its outstanding wear rate and driveability, PAGID endurance materials are often used at sprint races as well.
Black RS 14: Racing - This is a medium high friction value ceramic type compound with very good modulation, high fade resistance, low heat conductivity, and a good wear rate up to a temperature of 650C (1.200F). It is kind on discs, with visible grooving, but a limitation of hairline cracks. Applications include NASCAR, CART, F3, Touring cars, GT cars, WSC, Trans Am and Rally.
Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brakepads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad. These Front Pagid Brake Pads fit the following BMWs: 1995-1998 E36 BMW M3 2001-2006 E46 BMW M3 1989-1995 E34 BMW 525i 530i 535i 540i M5 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1997-2002 Z3 BMW M Roadster M Coupe
Prop 65 Warning
Previous Revisions
U1295
Product Q&A
Lifetime Replacement
This Product Is Covered By Our Lifetime Replacement Program
Some PDK components are covered by our Lifetime Replacement Program
Products protected by our Lifetime Replacement Program are covered for as long as you own the product, no need to worry about an expiration date. Purchase your products and enjoy some worry-free motoring, knowing we've got you covered.
If you have any questions, would like to learn more or are ready to place a replacement claim, click here!
This product is not eligible for Lifetime Replacement
Fits These Cars
MAKE
MODEL
SUBMODEL
ENGINE
Special Fitment Notes
BMW
E32
735i
M30 3.4L
Use vehicle selector to confirm fitment
BMW
E32
735iL
M30 3.4L
Use vehicle selector to confirm fitment
BMW
E32
740i
M60 4.0L
Use vehicle selector to confirm fitment
BMW
E32
740iL
M60 4.0L
Use vehicle selector to confirm fitment
BMW
E32
750iL
M70 5.0L
Use vehicle selector to confirm fitment
BMW
E34
525i
M20 2.5L
Use vehicle selector to confirm fitment
BMW
E34
525i
M50 2.5L
Use vehicle selector to confirm fitment
BMW
E34
530i
M60 3.0L
Use vehicle selector to confirm fitment
BMW
E34
535i
M30 3.4L
Use vehicle selector to confirm fitment
BMW
E34
540i
M60 4.0L
Use vehicle selector to confirm fitment
BMW
E34
M5
S38 3.5L
Use vehicle selector to confirm fitment
BMW
E36
M3
S50 3.0L
Use vehicle selector to confirm fitment
BMW
E36
M3
S52 3.2L
Use vehicle selector to confirm fitment
BMW
E39
525i
M54 2.5L
Use vehicle selector to confirm fitment
BMW
E39
528i
M52 2.8L
Use vehicle selector to confirm fitment
BMW
E46
330Ci
M54 3.0L
Use vehicle selector to confirm fitment
BMW
E46
330i
M54 3.0L
Use vehicle selector to confirm fitment
BMW
E46
330xi
M54 3.0L
Use vehicle selector to confirm fitment
BMW
E46
M3
S54 3.2L
Use vehicle selector to confirm fitment
BMW
Z3
M Coupe
S52 3.2L
Use vehicle selector to confirm fitment
BMW
Z3
M Coupe
S54 3.2L
Use vehicle selector to confirm fitment
BMW
Z3
M Roadster
S52 3.2L
Use vehicle selector to confirm fitment
BMW
Z3
M Roadster
S54 3.2L
Use vehicle selector to confirm fitment
BMW
Z4
3.0Si
N52 3.0L
Use vehicle selector to confirm fitment
BMW
Z4
M Coupe
S54 3.2L
Use vehicle selector to confirm fitment
BMW
Z4
M Roadster
S54 3.2L
Use vehicle selector to confirm fitment
*The above product applications have been written by Turner Motorsport. All
warranties, product application, fitment, and performance are the responsibility of Turner Motorsport.
For additional information see the terms of use.