Schrick Camshaft Set - E36 M3, MZ3, M52 inc 2.8 1995-99 - 256/264
- Mfg Part #
- TMS3859
- Turner Part #
- T#3859
Product Details
For the US E36 M3. Schrick 264/256 degree camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M50/M52s VAN0S System. And, higher profile cams work extremely well with an upgraded intake and exhaust. When upgrading the cams there are other areas you must take into consideration. Higher-flow fuel injectors, larger mass-air sensor, and custom programming are strongly recommended. Turner Motorsport sells complete intake & cam packages that boost power to over 290hp. See the Engine section under Camshafts for more info.
Cam Specs:
Intake - 264 degree, 11.2mm lift
Exhaust - 256 degree, 10.6mm lift
Schrick Technical Information / Specs
This item fits the following BMWs:
1993-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe
Kit Contents
| Description | Qty | ||
|---|---|---|---|
| E36 M3, MZ3 Schrick 256 Exhaust Camshaft with 10.6mm Lift | 1 | ||
| E36 M3, MZ3 Schrick 264 Intake Camshaft - 11.2mm Lift | 1 |
This Part Fits the Following BMWs
| Make | Model | Submodel | Engine |
|---|---|---|---|
| BMW | All | All | M50 2.5L |
| BMW | All | All | M52 2.8L |
| BMW | All | All | S50 3.0L |
| BMW | All | All | S52 3.2L |
| BMW | E34 | 525i | M50 2.5L |
| BMW | E36 | 325i | M50 2.5L |
| BMW | E36 | 325ic | M50 2.5L |
| BMW | E36 | 325is | M50 2.5L |
| BMW | E36 | 328i | M52 2.8L |
| BMW | E36 | 328ic | M52 2.8L |
| BMW | E36 | 328is | M52 2.8L |
| BMW | E36 | M3 | S50 3.0L |
| BMW | E36 | M3 | S52 3.2L |
| BMW | E39 | 528i | M52 2.8L |
| BMW | Z3 | 2.8 | M52 2.8L |
| BMW | Z3 | M Coupe | S52 3.2L |
| BMW | Z3 | M Roadster | S52 3.2L |
