E9X N54 CHRA Replacement - upgraded td04 thrust assembly and billet compressor wheels and stage 1 turbo charger

Product Details

Stage 1 Turbocharger with upgraded TD04 Thrust assembly, and Billet Compressor wheels - These are stage 1 N54 turbocharger upgrades using a new cast bearing housing, new cast VTT N54 compressor housing machined for a 14T billet compressor wheel, reman turbine wheel, 14T Billet  compressor wheels, all brand new internals using the upgraded TD04 thrust assembly.

PLEASE NOTE: This is very important to be aware of. Replacement CHRA's DO NOT COME READY TO RUN. You must disassemble your old N54 turbochargers, and install the new CHRA's into your old housings. This can potentially be VERY difficult, damage to the new CHRA can occur very easily if care is not taken when performing the swap. 

ALSO OF NOTE: These CHRA replacements WILL NOT help with any wastegate rattle, or worn watsgates, which can cause low boost conditions, sticky wastegates, etc. These are replacing ONLY the center section.

WARRANTY INFORMATION: Each VTT N54 CHRA comes with a 1 year limited, unlimited milage warranty to be free from defects. This warranty DOES NOT include damage caused by improper CHRA removal or installation, bent fins due to improper installation, foreign object damage due to improper installation. Basically you are installing these new CHRA's at your own risk. They are extremely fragile, if they are dropped, damaged in any way, before or during install, any and all warranties are null, and void. This is the risk associated with wanting to the CHRA swap yourself. If you have ANY doubts you can perform this, either order complete replacement units, OR take them to a shop to be swapped out. Your oil and filter MUST be changed when installing new CHRA's NO EXCEPTIONS. Not changing your oil will void your warranty.

Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

Prop 65 Warning

Product Q&A

Lifetime Replacement

Fits These Cars