Dual Mass Flywheel - E82/E9X N55, F3X 335/435, F10 535i
This is the stock twin mass flywheel for the N55 engine used in the E82 135i, E9X 335, F3x 335/435, and F10 535i. It's manufactured by OEM supplier LuK. Sachs recommends a new dual mass flywheel (DMF) on every other clutch replacement. There are several indicators for replacing the flywheel: damage to the clutch contact plate (from a severely worn clutch disc), grease leaking from inside (overheating), build-up of clutch material on the contact plate (excessive slipping and overheating), and failure of the internal damping system.
The dampening system uses rubber or coil springs to absorb driveline vibrations. Through age, excessive heat, and aggressive use the rubber loses its resilience and the metal springs lose their strength and become brittle. If the clutch and flywheel have become overheated the internal grease may break down as well. A DMF failure can be massive and catastrophic, not to mention dangerous as bits of metal and rubber fling themselves through the transmission bellhousing. Heat and aggressive driving will accelerate the wear so race and track cars should have their stock flywheels replaced at regular intervals or with any new clutch. Even normal street cars should plan for a new flywheel if it has high mileage.
DMF wear can only be checked with the transmission and clutch removed. If you can rotate the outer flywheel more than 20mm in either direction then it should be replaced.
A new pilot bearing (roller bearing) is included, pre-installed in the flywheel hub.
This item fits the following BMWs with the single turbo N55 engine and manual transmission: 2011-2012 E82 BMW 135i 2011 E90 BMW 335i 335xi 335i xDrive - Sedan 2011-2013 E92 BMW 335i 335xi 335i xDrive - Coupe 2011-2013 E93 BMW 335i - Convertible 2012-2015 F30 BMW 335i 335iX - Sedan 2014-2016 F34 BMW 335iX - Gran Turismo 2014-2016 F32 BMW 435i 435iX - Coupe 2014-2016 F33 BMW 435i 435iX - Convertible 2014-2016 F36 BMW 435i 435iX - Gran Coupe 2011+ F10 BMW 535i 535i xDrive
This is the stock twin mass flywheel for the N55 engine used in the E82 135i, E9X 335, F3x 335/435, and F10 535i. It's manufactured by OEM supplier LuK. Sachs recommends a new dual mass flywheel (DMF) on every other clutch replacement. There are several indicators for replacing the flywheel: damage to the clutch contact plate (from a severely worn clutch disc), grease leaking from inside (overheating), build-up of clutch material on the contact plate (excessive slipping and overheating), and failure of the internal damping system.
The dampening system uses rubber or coil springs to absorb driveline vibrations. Through age, excessive heat, and aggressive use the rubber loses its resilience and the metal springs lose their strength and become brittle. If the clutch and flywheel have become overheated the internal grease may break down as well. A DMF failure can be massive and catastrophic, not to mention dangerous as bits of metal and rubber fling themselves through the transmission bellhousing. Heat and aggressive driving will accelerate the wear so race and track cars should have their stock flywheels replaced at regular intervals or with any new clutch. Even normal street cars should plan for a new flywheel if it has high mileage.
DMF wear can only be checked with the transmission and clutch removed. If you can rotate the outer flywheel more than 20mm in either direction then it should be replaced.
A new pilot bearing (roller bearing) is included, pre-installed in the flywheel hub.
This item fits the following BMWs with the single turbo N55 engine and manual transmission: 2011-2012 E82 BMW 135i 2011 E90 BMW 335i 335xi 335i xDrive - Sedan 2011-2013 E92 BMW 335i 335xi 335i xDrive - Coupe 2011-2013 E93 BMW 335i - Convertible 2012-2015 F30 BMW 335i 335iX - Sedan 2014-2016 F34 BMW 335iX - Gran Turismo 2014-2016 F32 BMW 435i 435iX - Coupe 2014-2016 F33 BMW 435i 435iX - Convertible 2014-2016 F36 BMW 435i 435iX - Gran Coupe 2011+ F10 BMW 535i 535i xDrive
This Product Is Covered By Our Lifetime Replacement Program
Products protected by our Lifetime Replacement Program are covered for as long as you own the product, no need to worry about an expiration date. Purchase your products and enjoy some worry-free motoring, knowing we've got you covered.
If you have any questions, would like to learn more or are ready to place a replacement claim, click here!
Fits These Cars
MAKE
MODEL
SUBMODEL
ENGINE
Special Fitment Notes
BMW
E82
135i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E88
135i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335xi
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335xi
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E93
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F10
535i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F10
535i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F30
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F30
335i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F32
435i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F32
435i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F33
435i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F33
435i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F34
335i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F36
435i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
F36
435i xDrive
N55 3.0L
Use vehicle selector to confirm fitment
*The above product applications have been written by Turner Motorsport. All
warranties, product application, fitment, and performance are the responsibility of Turner Motorsport.
For additional information see the terms of use.