BMW Tools & Specialty Equipment for BMW E12 530i M30 3.0L

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

Need an extra lift on your floor jack for your especially tall vehicle?  The FDK2 is here for you.  Brought to you by AC Hydraulic and especially made for their products, this 4.92 inch extension will give you that extra lift you're looking for.

Fits:

• DK40Q
• DK60Q
• DK100Q
• DK120Q
• DK50HLQ

Specifications:

• Height: 4.92"

Engineered for optimal comfort and ease of movement, this reclining creeper seat is ideal for anyone working under vehicles. Its gas spring-supported backrest offers adjustable reclining from 0° to 70°, with seat angles shifting in 10° increments up to 30°, delivering superior ergonomics for mechanics and hobbyists alike.

Equipped with six 360° swivel casters, this creeper seat glides effortlessly around the workspace, allowing you to move smoothly without constantly adjusting your position, helping you stay focused on the job.

Constructed from heavy-duty materials, the seat is upholstered with non-slip, marine-grade vinyl, resistant to abrasion, chemicals, and oil. This durable design provides long-lasting comfort and is the perfect addition to your garage setup.

Features:

• TPR wheels feature a shock absorbing cushioned ride, while providing good floor protection and quiet rolling operation
• TPR wheels are resistant to chemicals, acids, alcohol, and water
• Wide, large diameter wheel improves rolling over rough surfaces
• Heavy-duty non-slip textured marine grade vinyl
• Comfortable thick-padded seat and backrest
• Locking casters
• Seat is resistant to abrasion, chemical, and oil

Specifications:

• Length (Backrest Up): 33 in. / 840 mm
• Length (Backrest Down): 45.25 in. / 1,150 mm
• Width (Frame): 17 in. / 430 mm
• Width Overall: 20.75 in. / 530 mm
• Seat Height (Down): 6.25 in. / 161 mm
• Backrest Height (Up): 31.5 in. / 800 mm
• Seat/Backrest Width: 14.75 in. / 376 mm
• Ground Clearance: ≈3 in. / 76 mm
• Seat Angle Min. / Max.: ≈0° to 30°
• Maximum Load: 600 lbs. / 272 kg.
• Backrest Angle Adjustment: Gas spring
• Seat Angle Adjustment: Mechanical Lock — 3 positions
• Casters: Six 360° Casters, ø2.5 in x .75 in., sleeve bearings, oil resistant, non-marring rubber wheels.
• Seat Materials: Padded Marine Vinyl Backrest and Seat. Marine Vinyl is abrasion, chemical and oil resistant.
• Frame Materials: Full powder coated, welded steel square tube
• Weight: 41.25 lbs. / 19 kg.
• Backrest Angle Min. / Max.: ≈0° to 70°

For some of the best bottle jacks in production, stick with AC Hydraulic.  Now backed by our LIFETIME REPLACEMENT program, don't worry about your jack failing you by combining two amazing brands in one deal: ECS's lifetime replacement and AC Hydraulic's premium quality.

Features:

• 5 models with lifting capacities from 26,500 - 66,000 lb
• With extension screw for optimal use of the stroke
• Jack can be used in horizontal position, as long as the pump piston is placed under the jack
• Fitted with practical carrying handle for easy transport

Specifications:

• Capacity: 26,500 lb
• Min height: 9.06 in
• Hydraulic lift: 6.30 in
• Extension screw: 4.33in
• Max height: 19.69 in
• Bevelled base: Yes

For all of us who grew up with lug bolt-equipped cars, it can be a pain to re-install wheels. With no studs to guide the wheel onto the hub, you're left searching for that perfect alignment all while blindly trying to find a lug bolt to thread into place. Not a pleasant experience.

Future Classic's wheel hangers allow you to thread two guide pins into the hub to make re-installing wheels a breeze. We have created a guide pin for each of the most popular thread pitches, each size features a ridged body to prevent the wheel from falling off the hub once it is seated. A perfect accessory set for every tool kit.

Product Details:

Makes fitting lug bolt-equipped wheels much easier M12x1.5 thread pitch Aluminum construction Threaded end with ridged body to prevent wheel travel Sold as a set of two