BMW Tools & Specialty Equipment for BMW E12 530i M30 3.0L

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

BMW Jack Pad Blue - Pair provides a professional-grade solution for safely lifting your BMW. Designed to fit perfectly at the factory jack points, this metal jack pad adapter ensures that you can lift your BMW, 2020 Supra, or MINI without risking damage to the jack points, rocker panels, or undercarriage.

• Safe Lifting: Designed for use at factory jack points to prevent damage.
• Durable Construction: Made from solid billet aluminum for long-lasting performance.
• Convenient Design: Easy to use with any floor jack, features a honeycomb grip pattern for stability.
• Non-Damaging: Does not touch or harm painted surfaces.
• USA Made: Crafted in the USA with precision and quality.

This jack pad adapter is a must-have tool for enthusiasts who want to lift their vehicles securely and correctly every time.

Engineered for optimal comfort and ease of movement, this reclining creeper seat is ideal for anyone working under vehicles. Its gas spring-supported backrest offers adjustable reclining from 0° to 70°, with seat angles shifting in 10° increments up to 30°, delivering superior ergonomics for mechanics and hobbyists alike.

Equipped with six 360° swivel casters, this creeper seat glides effortlessly around the workspace, allowing you to move smoothly without constantly adjusting your position, helping you stay focused on the job.

Constructed from heavy-duty materials, the seat is upholstered with non-slip, marine-grade vinyl, resistant to abrasion, chemicals, and oil. This durable design provides long-lasting comfort and is the perfect addition to your garage setup.

Features:

• TPR wheels feature a shock absorbing cushioned ride, while providing good floor protection and quiet rolling operation
• TPR wheels are resistant to chemicals, acids, alcohol, and water
• Wide, large diameter wheel improves rolling over rough surfaces
• Heavy-duty non-slip textured marine grade vinyl
• Comfortable thick-padded seat and backrest
• Locking casters
• Seat is resistant to abrasion, chemical, and oil

Specifications:

• Length (Backrest Up): 33 in. / 840 mm
• Length (Backrest Down): 45.25 in. / 1,150 mm
• Width (Frame): 17 in. / 430 mm
• Width Overall: 20.75 in. / 530 mm
• Seat Height (Down): 6.25 in. / 161 mm
• Backrest Height (Up): 31.5 in. / 800 mm
• Seat/Backrest Width: 14.75 in. / 376 mm
• Ground Clearance: ≈3 in. / 76 mm
• Seat Angle Min. / Max.: ≈0° to 30°
• Maximum Load: 600 lbs. / 272 kg.
• Backrest Angle Adjustment: Gas spring
• Seat Angle Adjustment: Mechanical Lock — 3 positions
• Casters: Six 360° Casters, ø2.5 in x .75 in., sleeve bearings, oil resistant, non-marring rubber wheels.
• Seat Materials: Padded Marine Vinyl Backrest and Seat. Marine Vinyl is abrasion, chemical and oil resistant.
• Frame Materials: Full powder coated, welded steel square tube
• Weight: 41.25 lbs. / 19 kg.
• Backrest Angle Min. / Max.: ≈0° to 70°

Protective Wheel Saver Socket - 17mm is designed to safeguard your valuable rims from damage during removal and installation. Featuring a synthetic polymer sleeve and insert, this socket ensures that your rims remain free from scratches or signs of wear while unscrewing and tightening lugs.

• Protects Wheels: The synthetic polymer sleeve and insert protect both factory and aftermarket wheels from scratches and damage.
• Versatile Use: Suitable for painted, clear-coated, chrome, factory, and other wheel finishes.
• Durable Construction: The six-point design and large contact surfaces help distribute stress and prevent damage.
• Wide Compatibility: Fits all 1/2" drive sockets, tools, and air tools, making it ideal for home use as well as rugged enough for professional shop use.
• Corrosion-Resistant: Made from heavy-duty materials that resist rust and corrosion, ensuring longevity.
• Essential Tool: A must-have for any serious enthusiast’s toolbox or for use at the shop when servicing your vehicle.
• Fits Various Vehicles: 17mm size is compatible with most BMW, MINI, Mercedes-Benz, Audi, VW, 2020+ Supra, and other vehicles with 17mm lug nuts.

This rugged and compact socket is perfect for maintaining your wheels and ensuring they stay in pristine condition.