BMW 6 Series E24 (1977-1989)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

APEX Wheels - Corporate Logo
T#:637384
Part#: APEXM12STDKIT5HX
Ships in 2 Business Days
$ 160.00 USD
Free Shipping
$ 160.00 USD
Free Shipping
GSP North America - Corporate Logo
T#:389693
Part#: NCV27526
In Stock
$ 104.99 USD
Free Shipping
$ 104.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E24 BMW 633CSi M6

E28 BMW 524td 528e 533i 535i 535is M5

E34 BMW 530i 535i 540i M5

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359479
Part#: 079-000
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

When the first M5 and M6 were brought to the U.S. they were de-tuned from their European brothers and sisters. That was a shame as the cars lost close to 40hp. But adding a Turner Performance Chip will get that lost horsepower back! Jim Conforti tuned these chips on the dyno to boost mid range torque and increase horsepower in the upper RPM range. As a result there is a 48 horsepower increase at 6000 RPM with a new rev limit of 7200 RPM! Conforti achieved this by tuning the car on the dyno, specifically changing the fuel and spark patterns in an effort to make the engine more efficient when burning 91+ octane fuel. Torque increases similarly in the heart of the powerband.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.
 

Horsepower Gain:+48 @ 6,000 RPM

Torque Gain:+32 @ 5,000 RPM

New Rev Limit7,200 RPM


This item fits the following BMWs:
1988 E28 BMW M5
1987-1989 E24 BMW M6

Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:359456
Part#: 059-240
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Turner Performance Chip: Unleash Your BMW's Hidden Power

Discover the effortless way to enhance your BMW's performance with the Turner Performance Chip. Dyno-tuned by the renowned BMW expert, Jim Conforti, this chip offers a gateway to increased power and torque, all while preserving the essence of your BMW. Explore the compelling features of this remarkable product:

  • Unlock the true potential of your BMW with the Turner Performance Chip. Carefully designed to optimize high-octane (91+) pump gas, it delivers superior mid-range torque and high-RPM horsepower, thanks to Jim Conforti's meticulous tuning.
  • Experience a performance boost with raised rev limits and precisely tuned fuel and spark maps, ensuring your BMW surpasses its factory performance without compromising safety and driveability.
  • Enjoy a hassle-free installation process – each chip is crafted for accessibility, arriving with detailed instructions. Enthusiasts using common hand tools can typically complete the installation within an hour.
  • Benefit from Turner Motorsport and Jim Conforti's wealth of experience, spanning over 20 years in the realm of BMW software tuning. These performance chips stand out from generic eBay alternatives, as they are meticulously designed with extensively tested fuel and spark maps, ensuring peak performance without any compromise.
  • Jim Conforti, a recognized authority in BMW chip tuning, has been perfecting the BMW driving experience since 1995. With over 10,000 units sold, his reputation is a testament to the unparalleled expertise in the field. Opt for the best – your BMW deserves nothing less.
  • The legendary M30 "big six" engine, known for its mid-range torque, can now achieve even greater high-end power with the Turner Conforti Performance Chip. It significantly enhances peak horsepower and mid-range torque, revitalizing your BMW's performance and maintaining its unique character.
  • Key Performance Metrics: - Horsepower Gain: +24 @ 5,000 RPM - Torque Gain: +29 @ 2,000 RPM - New Rev Limit: 6,600 RPM
  • Rest assured with provided installation instructions, ensuring a straightforward process even for enthusiasts.
  • Turner's confidence in the transformative potential of this product is underscored by their 30-day money-back guarantee, backed by ECS Tuning.
Show More Show Less

Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use
Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 1 Business Day
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less

ACM - Corporate Logo
T#:11061
Part#: 64121388069
In Stock at Vendor
$ 30.65 USD
Free Shipping on orders $49 and up
OEM BMW HEATER & A/C REPAIR KIT RESISTOR 64121388069
Autosol - Corporate Logo
T#:580275
Part#: AS7800
Back Ordered
$ 25.99 USD
Free Shipping on orders $49 and up
The proper protection for your convertible top.

Turner Conforti Performance Chips - Corporate Logo
T#:340130
Part#: E24635
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 199.20 USD
Free Shipping
The M30 3.5 inline-6 is a torquey motor, however it could be a little more powerful in the upper RPM range. With a Turner/Conforti Performance Chip power is boosted at all RPM with over 20ft-lbs of torque gain at only 2000 RPM. This chip was tuned on the dyno to yield as much performance from this engine as possible and still maintain its strength and durability. Jim Conforti tuned the fuel and spark maps to take advantage of 91 octane gasoline.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Read other's impressions:
"I went with the Conforti that I bought from Turner and am very happy with it. There is no noticeable (to me) change in fuel consumption. I have slightly better pop in lower gears where , gawdknows, the car really needs it and the car certainly pulls faster and stronger at the top end." - Taylor, Montreal, Canada.

"I have just installed the Conforti/Turner chip, actually increased my gas mileage by 1 mpg, but the power curve is much better and the movement of the point in the RPM bad where the engine limits itself is so much nicer. I am very happy with the change." - Rick, California.

"I tried Dinan and BavAuto�I like Jim C's the best." - Joe, Connecticut.


1985-1988 635CSi M30B34
Horsepower Gain:+24 @ 5,000 RPM
Torque Gain:+29 @ 2,000 RPM
New Rev Limit6,600 RPM

1989 635CSi M30B35
Horsepower Gain:+43 @ 6,250 RPM
Torque Gain:+21 @ 2,000 RPM
New Rev Limit6,800 RPM


Required Vehicle Info
E24 635CSi 85-89Bosch ECU part number, beginning with "0 261"
For Bosch ECU "0 261 200 059", we need to know the number of pins on the original chip.
manual or automatic transmission


This performance chip fits the following BMWs:
1985-1989 E24 BMW 635csi
Show More Show Less

GSP North America - Corporate Logo
T#:389682
Part#: 274094
Ships in 3 Business Days
$ 62.99 USD
Free Shipping on orders $49 and up

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E30 BMW M3

E28 BMW 524td 528e 533i 535i 535is M5

E24 BMW 633CSi 635CSi M6

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359484
Part#: 150-010
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Enhance your BMW's performance effortlessly with the Turner Performance Chip—an answer to your power and torque needs. Dyno-tuned by BMW legend Jim Conforti, these chips optimize high-octane pump gas, elevating mid-range torque and high-RPM horsepower. Designed to safely boost performance, each chip includes detailed instructions for easy installation by enthusiasts with basic hand tools.

Turner Motorsport and Jim Conforti, with over 20 years of expertise, breathe life into your BMW through software tuning. Unlike eBay chips, Turner Performance Chips employ extensively tested fuel & spark maps, ensuring peak performance without compromising engine health or driveability. Since 1995, Jim Conforti has been a pioneer in BMW chip tuning, earning Turner Motorsport a reputation as the leader in the field. With over 10,000 units sold, trust the best for your BMW.

The legendary M30 "big six" engine excels in mid-range torque but craves more high-end power in stock form. The Turner Conforti Performance Chip steps in, refining weak points in the power curve and delivering impressive peak horsepower gains. Revel in a substantial mid-range torque boost that awakens your BMW without sacrificing its distinctive character.

  • Horsepower Gain: +24 @ 5,000 RPM
  • Torque Gain: +29 @ 2,000 RPM
  • Easy installation with included instructions.

Turner stands behind your satisfaction, offering a 30-day money-back guarantee on this product, serviced by ECS Tuning.

Show More Show Less
Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping


Turner Conforti Performance Chips - Corporate Logo
T#:359550
Part#: 179-610
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and torque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's legendary M30 "big six" is certainly no slouch when it comes to mid-range torque, but it's somewhat lacking in high-end power in stock form. The Turner Conforti Performance Chip picks up where the factory left off, improving weak points in the engine's power curve while playing to its strengths. This chip produces awesome peak horsepower gains, with a healthy gain in mid-range torque that will wake up your BMW while preserving its character. Horsepower Gain: +43 @ 6,250 RPM Torque Gain: +21 @ 2,000 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.
Show More Show Less
APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 5 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader

Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less
Autosol - Corporate Logo
T#:16450
Part#: 7950
Ships in 9 Business Days
$ 60.99 USD
Free Shipping on orders $49 and up
Autosol's Convertible Top Cleaning Kit is a complete restoration kit for your canvas convertible top and plastic rear window. This package is an all-in-one solution for cleaning and protecting the fabric convertible top. Package includes Convertible Top Cleaner, Convertible Top Impregnating Agent (sealant and protectant), and Plastic Scratch Remover. First use the cleaner to remove dirt and stains. Then follow-up with the fabric treatment to preserve the color and protect against UV damage. Remove scratches, clean, and polish the plastic window back to its original clarity. Autosol is Made in Germany, and an OEM supplier to BMW for many of their Genuine BMW car care products.
Show More Show Less

ACM - Corporate Logo
T#:361824
Part#: 64508390602
In Stock
Sale - Save 57% $ 3.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.73 USD
Free Shipping on orders $49 and up
Sale - Save 57%
$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 1.73 USD
Free Shipping on orders $49 and up
Diameter is 11.1MM
Autosol - Corporate Logo
T#:580258
Part#: AS1040
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
Restores color and luster to leather while removing stains.

Turner Conforti Performance Chips - Corporate Logo
T#:359522
Part#: 179-600
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Elevate your BMW's performance effortlessly with the Turner Performance Chip, the ultimate answer for adding power and torque. Dyno-tuned by BMW legend Jim Conforti, these chips optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is raised, and fuel and spark maps are fine-tuned, ensuring your BMW outperforms its factory settings without compromising driveability. Designed for easy installation, each chip is shipped with detailed instructions, making it a quick, hands-on upgrade for enthusiasts.

  • Dyno-tuned by BMW legend Jim Conforti for optimal performance
  • Designed for high-octane (91+) pump gas
  • Boosts mid-range torque and high-RPM horsepower
  • Fine-tuned fuel and spark maps for enhanced power
  • Maintains driveability and improves responsiveness
  • Easy installation with detailed instructions included
  • Horsepower Gain: +43 @ 6,250 RPM, Torque Gain: +21 @ 2,000 RPM
  • New Rev Limit: 6,800 RPM for an exhilarating driving experience
  • 30-day money-back guarantee for confidence in your purchase

Turner Performance Chips lead the BMW chip tuning industry, ensuring your BMW gets the performance it deserves.

Show More Show Less

Autosol - Corporate Logo
T#:580273
Part#: AS6500
In Stock
$ 9.99 USD
Free Shipping on orders $49 and up
Rubber Seal Treatment / Frost Preventative
APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201374
Part#: EC719105ET22SMBK
Ships in 5 Business Days
$ 479.00 USD
Free Shipping
$ 479.00 USD
Free Shipping
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels Metal Valve Stem - Black - BMW & MINI
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593644
Part#: HW-OEM-VALVE-BK
Ships in 2 Business Days
$ 15.00 USD
Free Shipping on orders $49 and up
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less


Autel - Corporate Logo
T#:5663676
Part#: AULTS508K1
Ships in 6 Business Days
$ 739.99 USD
Free Shipping
$ 739.99 USD
Free Shipping
Pinpoint and replace bad TPMS Sensors
APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593645
Part#: HW-OEM-VALVE-GM
Ships in 2 Business Days
$ 15.00 USD
Free Shipping
$ 15.00 USD
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
Autel - Corporate Logo
T#:2914145
Part#: BT506
Ships in 6 Business Days
$ 402.99 USD
Free Shipping
$ 402.99 USD
Free Shipping
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
Show More Show Less

APEX Solid Gloss Black BMW Center Caps - Priced Each
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
Ships in 9 Business Days
$ 9.99 USD
Free Shipping
$ 9.99 USD
Free Shipping

APEX Wheels Metal Valve Stem - Silver - BMW & MINI
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:593646
Part#: HW-OEM-VALVE-SV
Ships in 2 Business Days
$ 17.00 USD
Free Shipping
$ 17.00 USD
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201376
Part#: EC719105ET22AN
Ships in 5 Business Days
$ 479.00 USD
$ 479.00 USD
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201364
Part#: EC71995ET22AN
Ships in 5 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201371
Part#: EC71910ET25SMBK
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Autel - Corporate Logo
T#:2914136
Part#: MSULTRA
Ships in 6 Business Days
$ 12,306.99 USD
Free Shipping on orders $49 and up
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.

Autel - Corporate Logo
T#:2914140
Part#: MV400-55
Ships in 6 Business Days
$ 405.99 USD
Free Shipping on orders $49 and up
This premier Autel MaxiVideo MV400 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight.
Autel - Corporate Logo
T#:40782369
Part#: AUL-TS508WFK-1
Ships in 6 Business Days
$ 419.99 USD
Free Shipping on orders $49 and up
The TS508WFK-1 is a TPMS service tool that features Quick and Advance modes of TPMS service and a TPMS status screen. It can read/activate/relearn all known sensors, has 4 methods of MX-Sensor programming, and performs placard value resets on supported vehicles. This scanner displays on-tool MX-Sensor relearn procedures including OBDII and can do key fob signal tests. The TS508WFK-1 includes an OBDII cable, a 1-year tool warranty, and free lifetime software updates are available with purchase.
Show More Show Less
APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201357
Part#: EC71995ET43RS
Ships in 5 Business Days
$ 426.00 USD
Free Shipping
$ 426.00 USD
Free Shipping
19x9.5" ET43 APEX EC-7 Wheel 23lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):43
Weight (lbs):23
Profile:2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less


Autosol - Corporate Logo
T#:580256
Part#: AS1000
Back Ordered
$ 11.99 USD
Free Shipping on orders $49 and up
Polishes and preserves metal surfaces.
Autosol - Corporate Logo
T#:1970
Part#: 6501
Back Ordered
$ 9.99 USD
Free Shipping on orders $49 and up
Autosol Rubber Care Gel Stick (75ml) is the same as Gummi Pflege Rubber Maintenance Stick that is no longer available from BMW, BMW Part # 82149407015 (82 14 9 407 015) just in liquid form with a foam applicator instead of a messy gel.

Perfect for protecting and revitalizing rubber seals such as sunroof, door and engine compartment seals. This silicone-based formula keeps seals flexible and repels water, preventing rubber seals from freezing in winter. Also provides UV protection. The convenient foam pad applicator allows precise application.

Ships via UPS Ground to US/Canada only (cannot ship Air or Express).
Show More Show Less
Autosol - Corporate Logo
T#:580276
Part#: AS7900
Back Ordered
$ 16.99 USD
Free Shipping on orders $49 and up
A fast-acting formula that is safe for all tops - cloth or vinyl.

APEX EC-7 19x9.5" ET33 Silver Wheel 22.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201360
Part#: EC71995ET33RS
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Autosol - Corporate Logo
T#:580257
Part#: AS1020
Back Ordered
$ 11.99 USD
Free Shipping on orders $49 and up
Restores color and sheen to plastic while protecting with UV inhibitors.
APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201361
Part#: EC71995ET33AN
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201359
Part#: EC71995ET33SMBK
Ships in 5 Business Days
$ 459.00 USD
Free Shipping
$ 459.00 USD
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Autosol - Corporate Logo
T#:580274
Part#: AS7700
Back Ordered
$ 11.99 USD
Free Shipping on orders $49 and up
Protects new leather and restores life and luster to older, hardened leather.