BMW 6 Series E24 (1977-1989)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Turner Conforti Performance Chips - Corporate Logo
T#:359479
Part#: 079-000
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

When the first M5 and M6 were brought to the U.S. they were de-tuned from their European brothers and sisters. That was a shame as the cars lost close to 40hp. But adding a Turner Performance Chip will get that lost horsepower back! Jim Conforti tuned these chips on the dyno to boost mid range torque and increase horsepower in the upper RPM range. As a result there is a 48 horsepower increase at 6000 RPM with a new rev limit of 7200 RPM! Conforti achieved this by tuning the car on the dyno, specifically changing the fuel and spark patterns in an effort to make the engine more efficient when burning 91+ octane fuel. Torque increases similarly in the heart of the powerband.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.
 

Horsepower Gain:+48 @ 6,000 RPM

Torque Gain:+32 @ 5,000 RPM

New Rev Limit7,200 RPM


This item fits the following BMWs:
1988 E28 BMW M5
1987-1989 E24 BMW M6

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359456
Part#: 059-240
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Turner Performance Chip: Unleash Your BMW's Hidden Power

Discover the effortless way to enhance your BMW's performance with the Turner Performance Chip. Dyno-tuned by the renowned BMW expert, Jim Conforti, this chip offers a gateway to increased power and torque, all while preserving the essence of your BMW. Explore the compelling features of this remarkable product:

  • Unlock the true potential of your BMW with the Turner Performance Chip. Carefully designed to optimize high-octane (91+) pump gas, it delivers superior mid-range torque and high-RPM horsepower, thanks to Jim Conforti's meticulous tuning.
  • Experience a performance boost with raised rev limits and precisely tuned fuel and spark maps, ensuring your BMW surpasses its factory performance without compromising safety and driveability.
  • Enjoy a hassle-free installation process – each chip is crafted for accessibility, arriving with detailed instructions. Enthusiasts using common hand tools can typically complete the installation within an hour.
  • Benefit from Turner Motorsport and Jim Conforti's wealth of experience, spanning over 20 years in the realm of BMW software tuning. These performance chips stand out from generic eBay alternatives, as they are meticulously designed with extensively tested fuel and spark maps, ensuring peak performance without any compromise.
  • Jim Conforti, a recognized authority in BMW chip tuning, has been perfecting the BMW driving experience since 1995. With over 10,000 units sold, his reputation is a testament to the unparalleled expertise in the field. Opt for the best – your BMW deserves nothing less.
  • The legendary M30 "big six" engine, known for its mid-range torque, can now achieve even greater high-end power with the Turner Conforti Performance Chip. It significantly enhances peak horsepower and mid-range torque, revitalizing your BMW's performance and maintaining its unique character.
  • Key Performance Metrics: - Horsepower Gain: +24 @ 5,000 RPM - Torque Gain: +29 @ 2,000 RPM - New Rev Limit: 6,600 RPM
  • Rest assured with provided installation instructions, ensuring a straightforward process even for enthusiasts.
  • Turner's confidence in the transformative potential of this product is underscored by their 30-day money-back guarantee, backed by ECS Tuning.
Show More Show Less
JB Racing - Corporate Logo
T#:3772
Part#: 520-090-240
Ships in 4 Business Days
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable.

Stock Flywheel Weight = 16.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1991-1995 E34 BMW M5
Show More Show Less

Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 1 Business Day
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less

JB Racing - Corporate Logo
T#:3770
Part#: 520-080-240
Ships in 6 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 22.0lbs
JB Flywheel Weight = 8.5lbs

This flywheel includes the ignition trigger wheel.

This item fits the following BMWs:
1982-1987 E23 BMW 733i 735i
1982-1989 E24 BMW 633csi 635csi M6
1985-1988 E28 BMW 535i 535is M5
Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:340130
Part#: E24635
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 199.20 USD
Free Shipping
The M30 3.5 inline-6 is a torquey motor, however it could be a little more powerful in the upper RPM range. With a Turner/Conforti Performance Chip power is boosted at all RPM with over 20ft-lbs of torque gain at only 2000 RPM. This chip was tuned on the dyno to yield as much performance from this engine as possible and still maintain its strength and durability. Jim Conforti tuned the fuel and spark maps to take advantage of 91 octane gasoline.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Read other's impressions:
"I went with the Conforti that I bought from Turner and am very happy with it. There is no noticeable (to me) change in fuel consumption. I have slightly better pop in lower gears where , gawdknows, the car really needs it and the car certainly pulls faster and stronger at the top end." - Taylor, Montreal, Canada.

"I have just installed the Conforti/Turner chip, actually increased my gas mileage by 1 mpg, but the power curve is much better and the movement of the point in the RPM bad where the engine limits itself is so much nicer. I am very happy with the change." - Rick, California.

"I tried Dinan and BavAuto�I like Jim C's the best." - Joe, Connecticut.


1985-1988 635CSi M30B34
Horsepower Gain:+24 @ 5,000 RPM
Torque Gain:+29 @ 2,000 RPM
New Rev Limit6,600 RPM

1989 635CSi M30B35
Horsepower Gain:+43 @ 6,250 RPM
Torque Gain:+21 @ 2,000 RPM
New Rev Limit6,800 RPM


Required Vehicle Info
E24 635CSi 85-89Bosch ECU part number, beginning with "0 261"
For Bosch ECU "0 261 200 059", we need to know the number of pins on the original chip.
manual or automatic transmission


This performance chip fits the following BMWs:
1985-1989 E24 BMW 635csi
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:359484
Part#: 150-010
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Enhance your BMW's performance effortlessly with the Turner Performance Chip—an answer to your power and torque needs. Dyno-tuned by BMW legend Jim Conforti, these chips optimize high-octane pump gas, elevating mid-range torque and high-RPM horsepower. Designed to safely boost performance, each chip includes detailed instructions for easy installation by enthusiasts with basic hand tools.

Turner Motorsport and Jim Conforti, with over 20 years of expertise, breathe life into your BMW through software tuning. Unlike eBay chips, Turner Performance Chips employ extensively tested fuel & spark maps, ensuring peak performance without compromising engine health or driveability. Since 1995, Jim Conforti has been a pioneer in BMW chip tuning, earning Turner Motorsport a reputation as the leader in the field. With over 10,000 units sold, trust the best for your BMW.

The legendary M30 "big six" engine excels in mid-range torque but craves more high-end power in stock form. The Turner Conforti Performance Chip steps in, refining weak points in the power curve and delivering impressive peak horsepower gains. Revel in a substantial mid-range torque boost that awakens your BMW without sacrificing its distinctive character.

  • Horsepower Gain: +24 @ 5,000 RPM
  • Torque Gain: +29 @ 2,000 RPM
  • Easy installation with included instructions.

Turner stands behind your satisfaction, offering a 30-day money-back guarantee on this product, serviced by ECS Tuning.

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359550
Part#: 179-610
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and torque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's legendary M30 "big six" is certainly no slouch when it comes to mid-range torque, but it's somewhat lacking in high-end power in stock form. The Turner Conforti Performance Chip picks up where the factory left off, improving weak points in the engine's power curve while playing to its strengths. This chip produces awesome peak horsepower gains, with a healthy gain in mid-range torque that will wake up your BMW while preserving its character. Horsepower Gain: +43 @ 6,250 RPM Torque Gain: +21 @ 2,000 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:20749252
Part#: VTT-DHCF
Ships in 10 Business Days
$ 51.99 USD
Free Shipping
$ 51.99 USD
Free Shipping
These are made from 100% Pre-Preg Carbon Fiber for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on
Show More Show Less

Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.
APR Valve Stem Caps - Set Of 4 - Silver
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31125602
Part#: MS100178
In Stock
11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping
11% off MSRP
$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

  • Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
  • Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
  • Easy Installation: Simple to install and compatible with most standard valve stems.
  • Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
  • Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Show More Show Less


APR Valve Stem Caps - Set Of 4 - Gunmetal
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31092523
Part#: MS100179
In Stock
11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping
11% off MSRP
$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

  • Material: Made from durable aluminum for long-lasting performance
  • Design: Engraved APR logo adds a distinctive look
  • Finish: Gunmetal color enhances the visual appeal of your wheels
  • Set Includes: 4 valve stem caps for a complete upgrade
  • Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359522
Part#: 179-600
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Elevate your BMW's performance effortlessly with the Turner Performance Chip, the ultimate answer for adding power and torque. Dyno-tuned by BMW legend Jim Conforti, these chips optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is raised, and fuel and spark maps are fine-tuned, ensuring your BMW outperforms its factory settings without compromising driveability. Designed for easy installation, each chip is shipped with detailed instructions, making it a quick, hands-on upgrade for enthusiasts.

  • Dyno-tuned by BMW legend Jim Conforti for optimal performance
  • Designed for high-octane (91+) pump gas
  • Boosts mid-range torque and high-RPM horsepower
  • Fine-tuned fuel and spark maps for enhanced power
  • Maintains driveability and improves responsiveness
  • Easy installation with detailed instructions included
  • Horsepower Gain: +43 @ 6,250 RPM, Torque Gain: +21 @ 2,000 RPM
  • New Rev Limit: 6,800 RPM for an exhilarating driving experience
  • 30-day money-back guarantee for confidence in your purchase

Turner Performance Chips lead the BMW chip tuning industry, ensuring your BMW gets the performance it deserves.

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:20749254
Part#: VTT-DHPLS
Ships in 10 Business Days
$ 32.99 USD
Free Shipping
$ 32.99 USD
Free Shipping
These are made from molded plastic for a perfect fit. Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:51778114
Part#: VTT-FAB-BMW-EWG-
Ships in 10 Business Days
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.
Show More Show Less