BMW 6 Series E24 (1977-1989)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

GSP North America - Corporate Logo
T#:389693
Part#: NCV27526
In Stock
$ 104.99 USD
Free Shipping
$ 104.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E24 BMW 633CSi M6

E28 BMW 524td 528e 533i 535i 535is M5

E34 BMW 530i 535i 540i M5

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359479
Part#: 079-000
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

When the first M5 and M6 were brought to the U.S. they were de-tuned from their European brothers and sisters. That was a shame as the cars lost close to 40hp. But adding a Turner Performance Chip will get that lost horsepower back! Jim Conforti tuned these chips on the dyno to boost mid range torque and increase horsepower in the upper RPM range. As a result there is a 48 horsepower increase at 6000 RPM with a new rev limit of 7200 RPM! Conforti achieved this by tuning the car on the dyno, specifically changing the fuel and spark patterns in an effort to make the engine more efficient when burning 91+ octane fuel. Torque increases similarly in the heart of the powerband.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.
 

Horsepower Gain:+48 @ 6,000 RPM

Torque Gain:+32 @ 5,000 RPM

New Rev Limit7,200 RPM


This item fits the following BMWs:
1988 E28 BMW M5
1987-1989 E24 BMW M6

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359456
Part#: 059-240
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Turner Performance Chip: Unleash Your BMW's Hidden Power

Discover the effortless way to enhance your BMW's performance with the Turner Performance Chip. Dyno-tuned by the renowned BMW expert, Jim Conforti, this chip offers a gateway to increased power and torque, all while preserving the essence of your BMW. Explore the compelling features of this remarkable product:

  • Unlock the true potential of your BMW with the Turner Performance Chip. Carefully designed to optimize high-octane (91+) pump gas, it delivers superior mid-range torque and high-RPM horsepower, thanks to Jim Conforti's meticulous tuning.
  • Experience a performance boost with raised rev limits and precisely tuned fuel and spark maps, ensuring your BMW surpasses its factory performance without compromising safety and driveability.
  • Enjoy a hassle-free installation process – each chip is crafted for accessibility, arriving with detailed instructions. Enthusiasts using common hand tools can typically complete the installation within an hour.
  • Benefit from Turner Motorsport and Jim Conforti's wealth of experience, spanning over 20 years in the realm of BMW software tuning. These performance chips stand out from generic eBay alternatives, as they are meticulously designed with extensively tested fuel and spark maps, ensuring peak performance without any compromise.
  • Jim Conforti, a recognized authority in BMW chip tuning, has been perfecting the BMW driving experience since 1995. With over 10,000 units sold, his reputation is a testament to the unparalleled expertise in the field. Opt for the best – your BMW deserves nothing less.
  • The legendary M30 "big six" engine, known for its mid-range torque, can now achieve even greater high-end power with the Turner Conforti Performance Chip. It significantly enhances peak horsepower and mid-range torque, revitalizing your BMW's performance and maintaining its unique character.
  • Key Performance Metrics: - Horsepower Gain: +24 @ 5,000 RPM - Torque Gain: +29 @ 2,000 RPM - New Rev Limit: 6,600 RPM
  • Rest assured with provided installation instructions, ensuring a straightforward process even for enthusiasts.
  • Turner's confidence in the transformative potential of this product is underscored by their 30-day money-back guarantee, backed by ECS Tuning.
Show More Show Less

JB Racing - Corporate Logo
T#:3772
Part#: 520-090-240
Ships in 4 Business Days
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable.

Stock Flywheel Weight = 16.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1991-1995 E34 BMW M5
Show More Show Less

JB Racing - Corporate Logo
T#:3770
Part#: 520-080-240
Ships in 6 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 22.0lbs
JB Flywheel Weight = 8.5lbs

This flywheel includes the ignition trigger wheel.

This item fits the following BMWs:
1982-1987 E23 BMW 733i 735i
1982-1989 E24 BMW 633csi 635csi M6
1985-1988 E28 BMW 535i 535is M5
Show More Show Less
Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 1 Business Day
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:340130
Part#: E24635
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 199.20 USD
Free Shipping
The M30 3.5 inline-6 is a torquey motor, however it could be a little more powerful in the upper RPM range. With a Turner/Conforti Performance Chip power is boosted at all RPM with over 20ft-lbs of torque gain at only 2000 RPM. This chip was tuned on the dyno to yield as much performance from this engine as possible and still maintain its strength and durability. Jim Conforti tuned the fuel and spark maps to take advantage of 91 octane gasoline.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Read other's impressions:
"I went with the Conforti that I bought from Turner and am very happy with it. There is no noticeable (to me) change in fuel consumption. I have slightly better pop in lower gears where , gawdknows, the car really needs it and the car certainly pulls faster and stronger at the top end." - Taylor, Montreal, Canada.

"I have just installed the Conforti/Turner chip, actually increased my gas mileage by 1 mpg, but the power curve is much better and the movement of the point in the RPM bad where the engine limits itself is so much nicer. I am very happy with the change." - Rick, California.

"I tried Dinan and BavAuto�I like Jim C's the best." - Joe, Connecticut.


1985-1988 635CSi M30B34
Horsepower Gain:+24 @ 5,000 RPM
Torque Gain:+29 @ 2,000 RPM
New Rev Limit6,600 RPM

1989 635CSi M30B35
Horsepower Gain:+43 @ 6,250 RPM
Torque Gain:+21 @ 2,000 RPM
New Rev Limit6,800 RPM


Required Vehicle Info
E24 635CSi 85-89Bosch ECU part number, beginning with "0 261"
For Bosch ECU "0 261 200 059", we need to know the number of pins on the original chip.
manual or automatic transmission


This performance chip fits the following BMWs:
1985-1989 E24 BMW 635csi
Show More Show Less
KMAC - Corporate Logo
T#:389654
Part#: 193316-1J
In Stock
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:359484
Part#: 150-010
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Enhance your BMW's performance effortlessly with the Turner Performance Chip—an answer to your power and torque needs. Dyno-tuned by BMW legend Jim Conforti, these chips optimize high-octane pump gas, elevating mid-range torque and high-RPM horsepower. Designed to safely boost performance, each chip includes detailed instructions for easy installation by enthusiasts with basic hand tools.

Turner Motorsport and Jim Conforti, with over 20 years of expertise, breathe life into your BMW through software tuning. Unlike eBay chips, Turner Performance Chips employ extensively tested fuel & spark maps, ensuring peak performance without compromising engine health or driveability. Since 1995, Jim Conforti has been a pioneer in BMW chip tuning, earning Turner Motorsport a reputation as the leader in the field. With over 10,000 units sold, trust the best for your BMW.

The legendary M30 "big six" engine excels in mid-range torque but craves more high-end power in stock form. The Turner Conforti Performance Chip steps in, refining weak points in the power curve and delivering impressive peak horsepower gains. Revel in a substantial mid-range torque boost that awakens your BMW without sacrificing its distinctive character.

  • Horsepower Gain: +24 @ 5,000 RPM
  • Torque Gain: +29 @ 2,000 RPM
  • Easy installation with included instructions.

Turner stands behind your satisfaction, offering a 30-day money-back guarantee on this product, serviced by ECS Tuning.

Show More Show Less

Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping
Black Forest Industries - Corporate Logo
T#:391722
Part#: GS2B
In Stock
Starting at $ 184.99 USD
Free Shipping
Starting at $ 184.99 USD
Free Shipping

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359550
Part#: 179-610
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and torque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's legendary M30 "big six" is certainly no slouch when it comes to mid-range torque, but it's somewhat lacking in high-end power in stock form. The Turner Conforti Performance Chip picks up where the factory left off, improving weak points in the engine's power curve while playing to its strengths. This chip produces awesome peak horsepower gains, with a healthy gain in mid-range torque that will wake up your BMW while preserving its character. Horsepower Gain: +43 @ 6,250 RPM Torque Gain: +21 @ 2,000 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.
Show More Show Less


Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less
Adjustable Rear Camber/Toe Bushings
E24: Production Dates to 1977- 4/1982
KMAC - Corporate Logo
T#:582353
Part#: 192026G
In Stock
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
KMAC - Corporate Logo
T#:3546
Part#: 193326
Special Order: No Guaranteed ETA
$ 269.95 USD
Free Shipping
$ 269.95 USD
Free Shipping
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set.

Fits the following BMW:
E23 BMW 7 series
83-89 E24 BMW 6 series
82-88 E28 BMW 5 series
E32 BMW  7 series
E34 BMW  5series
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:359522
Part#: 179-600
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Elevate your BMW's performance effortlessly with the Turner Performance Chip, the ultimate answer for adding power and torque. Dyno-tuned by BMW legend Jim Conforti, these chips optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is raised, and fuel and spark maps are fine-tuned, ensuring your BMW outperforms its factory settings without compromising driveability. Designed for easy installation, each chip is shipped with detailed instructions, making it a quick, hands-on upgrade for enthusiasts.

  • Dyno-tuned by BMW legend Jim Conforti for optimal performance
  • Designed for high-octane (91+) pump gas
  • Boosts mid-range torque and high-RPM horsepower
  • Fine-tuned fuel and spark maps for enhanced power
  • Maintains driveability and improves responsiveness
  • Easy installation with detailed instructions included
  • Horsepower Gain: +43 @ 6,250 RPM, Torque Gain: +21 @ 2,000 RPM
  • New Rev Limit: 6,800 RPM for an exhilarating driving experience
  • 30-day money-back guarantee for confidence in your purchase

Turner Performance Chips lead the BMW chip tuning industry, ensuring your BMW gets the performance it deserves.

Show More Show Less

Autel - Corporate Logo
T#:5663676
Part#: AULTS508K1
Ships in 6 Business Days
$ 739.99 USD
Free Shipping
$ 739.99 USD
Free Shipping
Pinpoint and replace bad TPMS Sensors
Autel - Corporate Logo
T#:2914145
Part#: BT506
Ships in 6 Business Days
$ 402.99 USD
Free Shipping
$ 402.99 USD
Free Shipping
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
Show More Show Less

KMAC - Corporate Logo
T#:389656
Part#: 193316-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less