Home
Suspension

BMW Suspension Parts for BMW 6 Series E24 (1977-1989)

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

H&R Sport Spring Set - E24 633i/635i, E28 528e/535i

5X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:3676

Part#: 50428

In Stock

Sale - Save 3% $ 279.99

$ 271.59 USD

Add to Wish List

Qty

Sale - Save 3% $ 279.99

$ 271.59 USD

Add to Wish List

Front Lowering -1.25"
Rear Lowering -1.25"

Enhance the look of your BMW E28 5 series and E24 6 series with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle. For cars without self-leveling suspension only.

We recommend installing Bilstein Sport shocks with these lowering springs.

This item fits the following BMWs:
1983-1989 E24 BMW 633csi 635csi
1982-1988 E28 BMW 528e 533i 535i 535is

Show More Show Less

Adjustable Front Camber Bushings

T#:31522921

Part#: 193616-6H

Ships Jul 24, 2025

14% off MSRP $ 320.00

$ 274.99 USD

Limited Qty Sale

Add to Wish List

Qty

14% off MSRP $ 320.00

$ 274.99 USD

Limited Qty Sale

Add to Wish List

Adjustable Rear Camber/Toe Bushings

E24: Production Dates to 1977- 4/1982

T#:582353

Part#: 192026G

Ships Jul 24, 2025

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Spring Joiner / Spring Locating Ring - Single

5X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:211199

Part#: ZT-I-X002A01

Ships in 4 Business Days

Sale - Save 8% $ 56.99

$ 52.67 USD

Add to Wish List

Qty

Sale - Save 8% $ 56.99

$ 52.67 USD

Add to Wish List

This aluminum spring seat fits between upper and lower 60mm springs to "join" them together. Typically you would have a main spring on top and a tender or helper spring on the bottom (or vice-versa). The spring joiner, or locator ring, fits between the springs with a retaining lip on the inside. We like this design better than an outside spring joiner because it's lighter and there's no material sitting on the outside where a tire might come in contact with it. These are priced per each.

Show More Show Less

KMAC Street Rear Adjustable Camber/Toe Bushings - E23, E24 83-89, E28...

T#:3546

Part#: 193326

Special Order: No Guaranteed ETA

$ 269.95 USD

Add to Wish List

Qty

$ 269.95 USD

Add to Wish List

Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set.

Fits the following BMW:
E23 BMW 7 series
83-89 E24 BMW 6 series
82-88 E28 BMW 5 series
E32 BMW 7 series
E34 BMW 5series

Show More Show Less

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E24, E28,...

T#:389654

Part#: 193316-1J

Special Order: No Guaranteed ETA

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988 E28 BMW 528e 533i 535i 535is M5
1993-1995 E34 BMW 525i
1982-1989 E24 BMW 633csi 635csi M6

Show More Show Less

KMAC Front Adjustable Inner Thrust Arm Bushing

T#:27205341

Part#: 193316-1H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Experience effortless caster adjustment with KMAC's premium inner thrust arm bushings.

Key Features:

1. Patented Design: Enjoy precise adjustments with a single wrench, even under load directly on the alignment rack.

2. Simplified Adjustment: Say goodbye to inaccurate multi-bolt systems and time-consuming disassembly for readjustments.

3. Extensive Adjustment Range: Benefit from the largest and strongest adjustment range available.

4. Mono Ball/Dual-Axis Bushings

5. Enhance brake and steering response with these high-performance bushings.

6. Superior Design: Our unique design surpasses traditional steel spherical bearings, offering over 2 ½ times the load-bearing and impact area.

Upgrade your vehicle's handling and responsiveness with KMAC's innovative inner thrust arm bushings.

Show More Show Less

KMAC Stage 3 Track Front Adjustable Camber/Caster Plates - E24, E28, ...

T#:389656

Part#: 193316-3L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988 E28 BMW 528e 533i 535i 535is M5
1993-1995 E34 BMW 525i
1982-1989 E24 BMW 633csi 635csi M6

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW 6 Series E24 (1977-1989)

Sub-Categories

H&R Sport Spring Set - E24 633i/635i, E28 528e/535i

Adjustable Front Camber Bushings

Adjustable Rear Camber/Toe Bushings

Spring Joiner / Spring Locating Ring - Single

KMAC Street Rear Adjustable Camber/Toe Bushings - E23, E24 83-89, E28...

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E24, E28,...

KMAC Front Adjustable Inner Thrust Arm Bushing

KMAC Stage 3 Track Front Adjustable Camber/Caster Plates - E24, E28, ...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results