BMW Suspension Parts for BMW 6 Series E24 (1977-1989)

Ensure optimal suspension performance in your BMW with Genuine BMW Upper Strut Mounts, designed as a crucial wearing component in BMW models. When replacing shocks, it is recommended to replace these mounts to maintain the integrity of your suspension system. Explore the benefits of Genuine BMW Upper Strut Mounts:

• Specifically designed for BMW models.
• Wearing item that should be replaced with each shock replacement.
• Ensures proper suspension functionality.
• Genuine BMW quality for durability and performance.
• Maintains the integrity of the suspension system.
• Priced individually for cost-effective replacement.

The Bilstein B8 Performance Plus Kit includes two front struts and two rear shocks. These shocks are for use with lowered springs such as from H&R or Eibach. We do not recommend that you use them with any factory spring, including factory sport package springs. With the increased damping rates from stock you will have much more control over body motions. These will give a much more buttoned down and taut feeling with lowering springs compared to stock shocks.

These shocks fit the following BMWs:

1982-1988 E28 528e, 533i, 535i, 535is, M5
1983-1999 E24 633Csi. 635Csi, L6, M6

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left- and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 175mm (6.89") to 235mm (9.25") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints (M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability NOTE: If you've modified your vehicle's suspension with aftermarket struts or coilovers, the mounting location for the sway bar end link may have moved. To confirm fitment with our adjustable end links, please measure the distance between the sway bar and the mounting location on the strut body with the vehicle at ride height and confirm that it is within the 175 - 235mm range of adjustment.

Ensure optimal performance for your BMW's air suspension system with the reliable 444C Air Compressor. This compressor fills your supply tank efficiently, providing ample air to inflate your air bags and lift your suspension. With a 100% duty cycle and a rating of 200psi, this compressor offers uninterrupted operation and quick air inflation. Considered one of the best options available, it draws around 20 amps and weighs only 9.75 pounds each.

• 100% duty cycle for uninterrupted operation
• Rated at 200psi for quick air tank filling
• Draws around 20 amps for efficient performance
• Lightweight design at only 9.75 pounds each

Air Lift proudly introduces the revolutionary Air Lift Performance 3P pressure-based air suspension control system after three years of extensive development and testing. This system represents the pinnacle of their innovation.

Air Lift Performance 3P amalgamates pressure-based control with optional ride-height sensing technology, leveraging the advantages of both systems to instantly enhance suspension control, performance, and ride flexibility.

Key Specifications:

• Controller: Features a vibrant TFT color display with adjustable backlight, illuminated preset buttons, and full-color indicators for tank pressure, 4-corner active height, and pressure readings. It's encased in a black anodized CNC machined case, allowing customized mounting options with a Micro-USB port for power.
• Mobile App: Works seamlessly with the free mobile app, enabling Bluetooth-based ride height and system settings adjustments. Additionally, the app facilitates direct system software updates to the manifold and controller.

Kit Features:

• Pressure-based 1/4" Manifold
• Black Anodized Aluminum Display

When it comes to customizing your BMW, options matter. Elevate your air tank game with Air Lift aluminum tanks, offering a plethora of sizes, port configurations, and finishes. Choose from raw aluminum or polished finish for a sleek look. Alternatively, customize with your preferred powder coating or anodizing for a personalized touch. Enjoy the weight-saving benefits of aluminum, enhancing performance with faster lap times and improved weight distribution. With Air Lift Performance tanks, elevate your BMW's aesthetics and performance effortlessly.

Features:

• (2) 1/4" End Ports
• (2) 3/8" End Ports
• (1) 1/4" Drain Port
• 200 PSI Maximum Working Pressure
• Polished Aluminum Tank
• Dimensions: 30" L x 6" H x 7.5" H

Fitting packs (available separately):

• 1/4" V2 Management Fitting Pack - ES#2862251
• 3/8" V2 Management Fitting Pack - ES#2862252
• 1/4" Manual Management Fitting Pack - ES#2862264