BMW Suspension Parts for BMW 6 Series E24 (1977-1989)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:401628
Part#: E28SPORT1KT
Back Ordered
$ 1,207.00

This product was last offered at the strikethrough price on
07-01-2026

$ 1,138.99 USD
$ 1,138.99 USD

This suspension package of Bilstein Sport shocks and H&R Sport springs will lower the ride height and firm up the suspension to provide less bodyroll and better handling. This E24 and E28 suspension package is firm but not harsh and can be used on daily-driven street cars as well as backroad and weekend corner carvers.

H&R Sport springs lower the ride height by 1.25" and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs. The ride quality is a little stiffer than a stock E28 M5.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Although this suspension is listed for the E28 M5 and E24 M6, the original rear self-leveling system must be disabled or removed.
 

Parts list:

  • 1 set - H&R Sport Springs (50428)
  • 1 pair - Bilstein Front Sport struts (P36-0243 / 34-181546)
  • 1 pair - Bilstein Rear Sport Shocks (B46-0607 / 24-006071)


This item fits the following BMWs:
1982-1988 E28 BMW 528e 533i 535i 535is M5
1982-1989 E24 BMW 633csi 635csi M6

Show More Show Less
Packaged by Turner - Corporate Logo
T#:338082
Part#: 31351134582
Ships in 1 day
Starting at $ 47.46 USD
Free Shipping on orders $49 and up
Starting at $ 47.46 USD
Free Shipping on orders $49 and up
The ball-joint inside the link will eventually wear out. The problem gets worse if the rubber boot surrounding the joint is ripped. When the joint goes bad you can hear it clunk when going over bumps. Replacement of the link will help with the handling and feel of the car.

This item fits the following BMWs:
1984-1991 E30 BMW M3
To 10/1991 E36 BMW 325i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1982-1989 E24 BMW 633csi 635csi M6
1988-1994 E32 BMW 735i 735il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
Show More Show Less
KMAC - Corporate Logo
T#:31522921
Part#: 193616-6H
Ships on Aug 19, 2026
$ 320.00 USD
Free Shipping on orders $49 and up

Meyle Upper Strut Mount - E24, E30, E34
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:592307
Part#: 31331139452
Ships on Dec 2, 2026
$ 30.99 USD
Free Shipping on orders $49 and up
A common source of noise in the front suspension

KMAC - Corporate Logo
T#:389654
Part#: 193316-1J
In Stock
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less
Adjustable Rear Camber/Toe Bushings
E24: Production Dates to 1977- 4/1982
KMAC - Corporate Logo
T#:582353
Part#: 192026G
In Stock
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping

KMAC - Corporate Logo
T#:3546
Part#: 193326
Special Order: No Guaranteed ETA
$ 269.95 USD
Free Shipping
$ 269.95 USD
Free Shipping
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set.

Fits the following BMW:
E23 BMW 7 series
83-89 E24 BMW 6 series
82-88 E28 BMW 5 series
E32 BMW  7 series
E34 BMW  5series
Show More Show Less
Meyle Rear Sway Bar Link - E30 E36 E24 E28
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579250
Part#: 3003355102
Ships on Oct 29, 2026
$ 13.99 USD
Free Shipping on orders $49 and up

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. Meyle sway bar links are the perfect option to restore body control and eliminate knocking noises.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This stock replacement sway bar / swaybar link secures the rear sway bar ends to the chassis. Over time the rubber breaks down and can cause poor handling. Alternate part number 33551124375.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1983-1989 E24 BMW 633csi 635csi M6
1982-1987 E23 BMW 733i 735i

Show More Show Less

KMAC - Corporate Logo
T#:389656
Part#: 193316-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less

KMAC - Corporate Logo
T#:27205341
Part#: 193316-1H
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping on orders $49 and up

Experience effortless caster adjustment with KMAC's premium inner thrust arm bushings.

Key Features:

1. Patented Design: Enjoy precise adjustments with a single wrench, even under load directly on the alignment rack.

2. Simplified Adjustment: Say goodbye to inaccurate multi-bolt systems and time-consuming disassembly for readjustments.

3. Extensive Adjustment Range: Benefit from the largest and strongest adjustment range available.

4. Mono Ball/Dual-Axis Bushings

5. Enhance brake and steering response with these high-performance bushings.

6. Superior Design: Our unique design surpasses traditional steel spherical bearings, offering over 2 ½ times the load-bearing and impact area.

Upgrade your vehicle's handling and responsiveness with KMAC's innovative inner thrust arm bushings.

Show More Show Less
Meyle Rear Trailing Arm - E23, E24, E28, E32, E34
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:372419
Part#: 33321126476
Special Order: No Guaranteed ETA
$ 33.99 USD
Free Shipping on orders $49 and up
Replace those sloppy arms and get your vehicle back in shape
Bav Auto Trailing Arm Inner Bushing Tool - Master Set
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.
Bav Auto Tools - Corporate Logo
T#:580442
Part#: B8800137
In Stock
Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD
Free Shipping
Sale - Save 3%
$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD
Free Shipping
Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.
Show More Show Less


Bav Auto Tools - Corporate Logo
T#:580366
Part#: B8800042
In Stock
Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD
Free Shipping on orders $49 and up
Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580394
Part#: B8800081
In Stock
Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD
Free Shipping
Sale - Save 5%
$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD
Free Shipping
Used to install or remove shock and strut nuts - no more using an impact gun!
Bav Auto Tools - Corporate Logo
T#:580405
Part#: B8800095
Ships on Sep 1, 2026
Sale - Save 5% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD
Free Shipping on orders $49 and up
A complete slide hammer kit for your next suspension job.

Bav Auto Tools - Corporate Logo
T#:580451
Part#: B8800146
In Stock
Sale - Save 40% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.40 USD
Free Shipping on orders $49 and up
Sale - Save 40%
$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.40 USD
Free Shipping on orders $49 and up
Will not tear tie rod boots, which can lead to premature failure of the tie rod assembly.

Bav Auto Tools - Corporate Logo
T#:580424
Part#: B8800117
In Stock
Sale - Save 25% $ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD
Free Shipping on orders $49 and up
Used to separate steering knuckle from your shock/strut easily, no need to use a chisel and hammer now!
Bav Auto Tools - Corporate Logo
T#:580331
Part#: B8300001
In Stock
Sale - Save 3% $ 9.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.65 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 9.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.65 USD
Free Shipping on orders $49 and up