Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E24 Slotted Brake Rotors & Discs

BMW E24 Slotted Brake Rotors & Discs Developed from years of racing and tracking the E36 and E46, these gas-slotted rotors provide a crucial oulet path for gas. This gas can build up between the pad and the rotor surface, resulting in a slight delay when pressing your foot on the pedal. These are a direct-replacement rotor, in the same dimensions as the stock rotors, and built to an exclusive Turner Motorsport design. Anti-corrosion paint is applied to the rotor hat and the vane area to prevent rust.
You're currently viewing parts for your (E24) 6-Series 1977-1989. Reset your chassis
For accurate results, specify your model below.
Brake Rotor Retaining Screw / Hold Down Bolts (pair) - M8x12 Brake rotor retaining screw used for many BMW applications. M8x12.We recommend replacing the brake rotor hold down bolts each time the brake rotors are removed as they have a tendency to rust into place or to become stripped with multiple uses. This is for a pair of 2 bolts.

+ Emblem Application Specifics
(click here to check your car)
Fits the following BMWs:
Front Brake Rotor Hold Down Bolt
E12 528i
E12 530i
E21 320i
E23 733i
E23 735i
E24 630CSi
E24 633CSi
E28 524td
E28 528e
E28 533i
E28 535i
E28 M5
E30 325ix
E30 318i
E30 318is
E30 325e
E30 325i
E30 M3
E31 850Ci
E32 735i
E32 735iL
E32 750iL
E34 525i
E34 535i
E34 M5 3.6
E39 M5
E46 M3
E60 M5
E63 M6
E64 M6
E82 M Coupé
E85 Z4 M3.2
E86 Z4 M3.2
E90 M3
E90N M3
E92 M3
E92N M3
E93 M3
E93N M3
F06 M6
F10 M5
F12 M6
F13 M6
F80 M3
F82 M4
F83 M4

Rear Brake Rotor Hold Down Bolt
E30 318i
E12 528i
E12 530i
E21 320i
E23 733i
E23 735i
E24 630CSi
E24 633CSi
E24 635CSi
E24 M6
E28 524td
E28 528e
E28 533i
E28 535i
E28 M5
E30 318i
E30 318is
E30 325e
E30 325i
E30 M3
E31 850Ci
E32 735i
E32 735iL
E32 740i
E32 740iL
E32 750iL
E34 530i
E34 540i
E34 525i
E34 535i
E34 M5 3.6
Genuine BMW
Part #: 34111123072-2
Price: $2.10 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Gas-Slotted Brake Rotors (Pair) - Rear - E24 633CSi/M6 & E28 528e/533i/535i/M5 Direct replacement REAR gas-slotted brake discs for the E24 633CSi/M6 & E28 528e/533i/535i/M5. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

Slotting a rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The slots in our rotors allow the gases to escape giving better braking performance. For track and racing use, slotting is preferred over cross-drilling because the slots don't take away as much mass from the rotor and won't suffer from structural cracks.

Sold as a REAR pair.

This item fits the following BMWs:
1982-1988 E28 BMW 528e 533i 535i 535is M5
1983-1989 E24 BMW 633csi 635csi M6
StopTech
Part #: 34211121387GS
Price: $127.90 (USD) 
Direct Ship
Quantity:   
Stainless Brake Rotor Set Screw (34111123072) - Set Of 4

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws. As everyone knows, the stock screws will seize in the holes over time. And the shallow recess on the head means the screw is easily stripped. These replacement rotor screws are stainless steel and won't corrode and seize in place.

This is a set of 4 stainless screws. Most BMW rotors take one screw but some M cars after 2001 will take two screws per rotor.

Turner Motorsport
Part #: 001359ecs01ax4KT
Price: $9.96 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Gas-Slotted Brake Rotors (Pair) - Front - E28 535i/is - E24 635csi Direct replacement Front gas-slotted brake discs for E28 / E24. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

Slotting a rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The slots in our rotors allow the gases to escape giving better braking performance. For track and racing use, slotting is preferred over cross-drilling because the slots don't take away as much mass from the rotor and won't suffer from structural cracks.

Sold as a FRONT pair.

This item fits the following BMWs:
1985-1988 E28 BMW 535i 535is
1984-1989 E24 BMW 635csi
StopTech
Part #: 34111153228GS
Price: $175.90 (USD) 
Direct Ship
Quantity: