Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M88 engine using the factory engine accessory mount. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and yellow zinc plated to withstand the toughest conditions without sacrificing the OEM look and feel. What’s included? A/C Solutions Sanden compressor bracket Yellow zinc 10.9 hardware Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. For complete plug-and-play kits, see here. A larger V-belt will be required Use Gates 13x875mm for the BMW E30, E28, and E24 (M30B34). Use Gates 13x925mm for the BMW E24 (M30B35) Early model cars (typically pre-1985) will need the later engine accessory mount: 64521717007 (M20); 64521284953 (M30/S38). For use with the following models: BMW E30 (325e/es, 325i/is, 325ix) BMW E28 (524td, 528e, 533i, 535i/is, M5) BMW E24 (633CSi, 635CSi, M635CSi, M6) BMW E23 (732i, 735i, 745i) PATENT PENDING
Show More Show Less
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345). If you are planning to use this with our E30 Sanden line set, you will need the rear exit Sanden compressor instead.
Show More Show Less
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345)
Show More Show Less
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a high-pressure cut off switch Fitment notes: This switch is compatible with the E28/E24 filter drier and the early model E30 filter drier. For use with the following models: BMW E23, E24, E28, E30 Cross-reference part numbers: 64538363859, 64531386971, ACS0247P, MT0307
Show More Show Less
Designed to mimic the factory BMW and Porsche design language, this engine bay label is used to document the amount and date of R134a added to the system after completing any A/C repair. This sticker is designed for high temp engine bay applications and should be placed in a visible spot for future service technicians to reference. Made in the USA. What’s included? A/C Solutions R134a retrofit label (3.75" wide) Cross reference part numbers: 64508363254
Show More Show Less
For use on the factory Bosch R12 system or our upgraded Sanden R134a conversions, this kit provides the o-rings needed to convert your A/C system to the modern HNBR R134a standard. This is cross compatible with all versions of the E30, E28, E24, and E23, and may include additional o-rings as a result. What’s included? 2x #12 R134a o-rings 4x #10 R134a o-rings 6x #8 R134a o-rings 5x #6 R134a o-rings Fitment notes: For use with the following models: BMW E23, E24, E28, E30, E32 Cross-reference part numbers: 64508390602, 64508390601, 64508390603, 64508390604, 64508390605, 64531350491
Show More Show Less
Designed for use on the E24, E28, and E30, these R134a adapters are used to fit over your original R12 low-pressure and high-pressure ports to charge the system with R134a. What’s included? R134a low and high-pressure service fittings Fitment notes: Low profile design allows for clearance around BMW E30 hood support. For use with the following models: BMW E23, E24, E28, E30
Show More Show Less
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a using a modern Sanden compressor, new R134a lines, and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Note: Line layout and design may differ by model. Early model cars (typically pre-1985) will need the later engine accessory mount: 64521284953. And late model cars (typically post-1987) with fuel coolers will have to be capped and removed. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) OE R134a filter drier Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a engine bay o-ring kit R134a retrofit label Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in under 4 hours by a professional. It is designed to tuck neatly around the factory heat shield(s) while providing ample clearance around both US and euro headers and OEM undertrays. This kit assumes your vehicle is stock and still retains all original equipment. It is designed to use the OEM condenser and aux fan, high-pressure switch (on drier), and high-pressure drier return lines, along with proper functionality of the evaporator, expansion valve, and HVAC sensors.
Show More Show Less
The original A/C Solutions box sticker - perfect for your corner window, tool chest, laptop, desk, and more. Made in the USA. What’s included? A/C Solutions box sticker (4" wide)
