BMW 3 Series E30 (1984-1991)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

E28 528e, E30 325e Turner Motorsport Conforti Performance Chip ...
For vehicles with a production date from 09/1984 up to 09/1987 and Bosch DME # 0-261-200-027
Turner Conforti Performance Chips - Corporate Logo
T#:359446
Part#: 027-000
In Stock
Sale - Save 20% $ 199.00

This product was last offered at the strikethrough price on
05-03-2026

$ 159.20 USD
Free Shipping
Sale - Save 20%
$ 199.00

This product was last offered at the strikethrough price on
05-03-2026

$ 159.20 USD
Free Shipping

The 2.7 liter inline-6 is a torquey car, however, performance drops off greatly after 4000 RPM. With a Turner Performance Chip power is boosted at all RPM but most importantly in the upper RPM. The car really feels more alive! This chip was tuned on the dyno to yield as much performance from this engine as possible and still maintain its strength and durability. Jim Conforti tuned the fuel and park maps to take advantage of 91 octane gasoline. By making the engine more efficient with this fuel, gains in horsepower and torque are achieved as well as making the engine run smoother.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Horsepower Gain +24 @ 4,500 RPM

Torque Gain: +28 @ 4,500 RPM

New Rev Limit: 5,300 RPM

NOTE: your car may have a replacement DME ending in 021. Our chips will work in this replacement computer as long as the existing chip is not soldered.

This item fits the following BMWs:
1985-1987 E30 BMW 325e 325es
1985-1987 E28 BMW 528e with build date of 09/1984 up to 09/1987

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359588
Part#: 175-300
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Need to breath more life into your engine? Add a Turner Performance Chip! These chips were tuned by Jim Conforti on the dyno to maximize the engine's efficiency when using 91 octane gasoline. The result is more horsepower and better torque - especially in the mid-range of the RPM band. The car really feels more alive!

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.

Horsepower Gain: +12 @ 5,500 RPM
Torque Gain: +15 @ 2,500 RPM
New Rev Limit: 7,000 RPM

This performance chip fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359514
Part#: 173-300
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Unlock the Power of Your BMW with the Turner Performance Chip

The Turner Performance Chip is your ultimate solution to add power and torque to your BMW effortlessly. Expertly dyno-tuned by BMW tuning legend Jim Conforti, these chips are meticulously designed to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. They are engineered to elevate your BMW's performance without compromising its integrity.

Key Features:

  • Dyno-tuned by BMW tuning legend Jim Conforti
  • Raises the rev limit for increased performance
  • Fine-tuned fuel and spark maps for superior engine responsiveness
  • Easy installation with detailed instructions
  • Compatible with high-octane pump gas (91+)

Turner Motorsport and Jim Conforti combine over two decades of experience to breathe new life into your BMW through software tuning. Unlike generic eBay chips, Turner Performance Chips feature extensively tested and thoughtfully designed fuel and spark maps. This ensures optimal performance without compromising engine safety or driveability. With a track record of over 10,000 units sold, Jim Conforti is widely recognized as the leading expert in BMW chip tuning. Don't settle for imitations – your BMW deserves the best.

The BMW M20 inline six engine is renowned for its reliability and ease of maintenance. Jim Conforti harnessed these strengths to unlock additional power and torque without risking engine damage. Experience the true potential of your M20 with a Turner Conforti Performance Chip.

Performance Gains:

  • Horsepower Gain: +15 @ 5,000 RPM
  • Torque Gain: +15 @ 5,000 RPM
  • New Rev Limit: 6,900 RPM

Installation instructions are included, ensuring a hassle-free installation process. Turner Motorsport is so confident in the performance of this product that they offer a 30-day money-back guarantee, supported by ECS Tuning.

Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:359460
Part#: 0710-3000
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Adding a TMS Performance Chip gives you the biggest bang for your buck! Jim Conforti tuned these chips on the dyno to boost mid range torque and increase horsepower in the upper RPM range. While not exactly producing V8-levels of torque you will definitely like the power increase across the rev band. The best thing is that there is NO downside to installing a Turner Performance Chip. urner Motorsport has been in the BMW chip business since 1995 and all chips have been dyno-tuned to achieve optimum performance and safety. As an added feature, the top speed limiter is removed. Premium 91+ octane fuel is required.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.

Horsepower Gain: +24 @ 7,600 RPM
Torque Gain: +19 @ 6,000 RPM
New Rev Limit: 7,800 RPM

This performance chip fits the following BMWs:
1988-1991 E30 BMW M3 (US 2.3L)

Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:386789
Part#: 525-210
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Enhance your BMW's power effortlessly with the Turner Performance Chip—the ultimate solution for elevated performance and torque. Developed by BMW tuning luminary Jim Conforti, these chips are meticulously crafted to optimize high-octane (91+) pump gas, delivering heightened mid-range torque and high-RPM horsepower. Raising the rev limit and fine-tuning fuel and spark maps ensures your BMW exceeds factory performance without compromising safety, driveability, or responsiveness. The Turner Performance Chip is designed to safely improve performance, making it a must-have for enthusiasts. Shipped with detailed instructions, installation typically takes an hour with basic hand tools.

Benefit from over 20 years of expertise from Turner Motorsport and Jim Conforti, pioneers in BMW software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested fuel & spark maps, extracting maximum performance without risking engine health or driveability. Since 1995, Jim Conforti has honed the BMW driving experience, uncovering additional power and torque while enhancing throttle response. With over 10,000 units sold, Jim Conforti stands as the unrivaled leader in BMW chip tuning—don't settle for imitations; your BMW deserves the best.

Leverage the legendary reliability of BMW's M20 inline six with the Turner Conforti Performance Chip. Jim Conforti has unlocked additional power and torque without compromising the engine's durability. Awaken your M20's performance potential while maintaining the renowned reliability it's known for.

  • Horsepower Gain: +15 @ 5,000 RPM
  • Torque Gain: +15 @ 5,000 RPM
  • New Rev Limit: 6,900 RPM
  • Installation instructions included.

Turner is so confident in the transformative power, torque, and overall performance of this product that they offer a 30-day money-back guarantee, serviced by ECS Tuning.

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359485
Part#: 153-200
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, the rev limit is raised, and fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and toque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's M20 inline six has a well-deserved reputation for being bulletproof and easy to maintain. Jim Conforti leveraged those strengths to find additional power and torque, without risking engine damage. Wake up your M20 and see performance you never thought possible, all while maintaining the legendary reliability they are known for with a Turner Conforti Performance Chip. Horsepower Gain: +15 @ 5,000 RPM Torque Gain: +15 @ 5,000 RPM New Rev Limit: 6,900 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:7292019
Part#: TISTUD20125
In Stock
Sale - Save 7% $ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD
Free Shipping on orders $49 and up
VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M12x1.5x75mm This fits all M12x1.5 applications Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.
Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359517
Part#: 173-310
In Stock
Sale - Save 87% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 32.82 USD
Free Shipping on orders $49 and up
Sale - Save 87%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 32.82 USD
Free Shipping on orders $49 and up
If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, the rev limit is raised, and fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and toque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's M20 inline six has a well-deserved reputation for being bulletproof and easy to maintain. Jim Conforti leveraged those strengths to find additional power and torque, without risking engine damage. Wake up your M20 and see performance you never thought possible, all while maintaining the legendary reliability they are known for with a Turner Conforti Performance Chip. Horsepower Gain: +15 @ 5,000 RPM Torque Gain: +15 @ 5,000 RPM New Rev Limit: 6,900 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:340134
Part#: E30325
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 199.20 USD
Free Shipping
Need to breath more life into your engine? Add a Turner Performance Chip! These chips were tuned by Jim Conforti on the dyno to maximize the engine's efficiency when using 91 octane gasoline. The result is more horsepower and better torque - especially in the mid-range of the RPM band. The car really feels more alive!

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Horsepower Gain:+15 @ 5,000 RPM
Torque Gain:+15 @ 5,000 RPM
New Rev Limit6,900 RPM


Required Vehicle Info
E30 325i/ix 87-92Bosch ECU part number, beginning with "0 261"
manual or automatic transmission
model year


This performance chip fits the following BMWs:
1987-1992 E30 BMW 325i 325ic 325is 325ix
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:303168
Part#: 525-300
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Turner Performance Chip for BMW

Unleash the full potential of your BMW with a Turner Performance Chip, the easiest way to add power and torque. Dyno-tuned by BMW tuning expert Jim Conforti, these chips optimize high-octane pump gas to boost mid-range torque and high-RPM horsepower. With raised rev limits and fine-tuned fuel and spark maps, your BMW will outperform its factory settings. Enjoy improved performance, drivability, and responsiveness without any downsides. Each chip includes detailed instructions for easy installation in just an hour with hand tools.

  • Dyno-tuned for maximum power and torque
  • Boosts mid-range torque and high-RPM horsepower
  • Improves performance without sacrificing drivability
  • Easy installation with included instructions
  • Backed by a 30-day money-back guarantee
Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359542
Part#: 380-300
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Unlock the hidden power and torque of your BMW with a Turner Performance Chip, the ultimate solution for boosting your vehicle's performance. These chips, meticulously dyno-tuned by BMW tuning legend Jim Conforti, are specially designed to maximize the potential of high-octane (91+) pump gas. Elevate your driving experience with increased mid-range torque and high-RPM horsepower. The installation is hassle-free and typically takes only an hour for an enthusiast equipped with basic hand tools.

Key Features:

  • Turner Performance Chip: Your path to increased power and torque for your BMW.
  • Precision Tuning: Dyno-tuned by BMW tuning expert Jim Conforti.
  • Optimized Performance: Enhances mid-range torque and high-RPM horsepower.
  • Improved Rev Limit: Raises the rev limit for enhanced engine performance.
  • Enhanced Fuel and Spark Maps: Fine-tuned for superior performance.
  • Plug-and-Play: Easy installation with detailed instructions included.
  • No Downsides: Safely improves performance while enhancing driveability and responsiveness.
  • Turner Motorsport Expertise: Over 20 years of experience in BMW software tuning.
  • Top-Quality Design: Unlike eBay chips, these chips ensure top performance without risking engine damage.
  • Jim Conforti Legacy: Widely recognized as a leader in BMW chip tuning since 1995.
  • Horsepower Gain: +15 at 5,000 RPM.
  • Torque Gain: +15 at 5,000 RPM.
  • New Rev Limit: Raised to 6,900 RPM.
  • Compatibility: Designed for BMW's M20 inline six engine.
  • Installation instructions included for your convenience.
  • Money-Back Guarantee: Turner offers a 30-day money-back guarantee, demonstrating their confidence in the product's performance. Serviced by ECS Tuning.

Experience the transformation in your BMW's performance and explore newfound power, torque, and overall capabilities while preserving the legendary reliability it's known for. Invest in a Turner Conforti Performance Chip, and unleash the full potential of your BMW.

Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:340336
Part#: M3-21LB-CHIP
In Stock
Sale - Save 20% $ 299.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 239.20 USD
Free Shipping
Sale - Save 20%
$ 299.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 239.20 USD
Free Shipping

If you have an M3 engine and want to use the 21.5 lb/hr injectors (pink top, stock on the 2.8 M52 and 3.2 S52) we have the perfect chip for you. Instead of changing to the smaller 17lb injectors or upgrading to the full 24lb, you can use the injectors from the stock 3.2 M3. They are in-between 17lb and 24lb, allowing a little more fuel to compensate for intake and/or exhaust upgrades.Perfect for running headers with an intake! There are plenty of surplus 21.5lb injectors out there (we sometimes have them too, check out Used Parts section).

It's usually not necessary to use bigger injectors but this gives you another option in your engine planning. This software covers almost all of the popular bolt-on upgrades, including the larger HFM (Euro or 540). Choose the mods/upgrades from the list below.Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Note: we will not be offering this software for use with cams. More aggressive camshafts require the use of the Bosch 24lb injectors. The 21.5lb injectors are maxed out when used with cams.

Additional Options:

  • EWS-delete: required when using the silver 413 ECU in a car that does not have EWS (all chassis manufactured before 12/94). If you will be using this chip in an EWS car (1/95-later) you do not need EWS-delete as nothing EWS related should be changing.
  • Speed sensor delete: for an E30 with an M50 engine conversion, the signal from speed sensor does not make it to the DME, causing a low rev limit. We remove the need for the speed sensor signal to reach the DME.

This S52 OBD-I Performance Chip applies to the following BMWs:
Any S52 engine converted to OBD-I electronics
1985-1992 E30 S52 conversion
1989-1994 E34 S52 conversion
1995* E34 S52 conversion
1992-1994 E36 S52 conversion
1995-1999* E36 S52 conversion
* - 1995-1999 model years may have EWS-II activated. Pay special attention to production dates and ECU numbers.

Show More Show Less


Turner Conforti Performance Chips - Corporate Logo
T#:591090
Part#: 524-210
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.99 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.99 USD
Free Shipping

Unleash the true potential of your BMW effortlessly with the Turner Performance Chip—a game-changer in power and torque. Engineered by BMW tuning maestro Jim Conforti, these chips optimize high-octane (91+) pump gas, elevating mid-range torque and high-RPM horsepower. The rev limit is raised, and fuel and spark maps are finely tuned to amplify your BMW's performance beyond factory standards. Installing a Turner Performance Chip has no downsides—it's meticulously designed for safe performance enhancement, maintaining driveability, and enhancing responsiveness. Shipped with detailed instructions, enthusiasts can typically install these chips in just an hour with basic hand tools.

Benefit from the wealth of experience from Turner Motorsport and Jim Conforti—over 20 years of refining BMWs with software tuning expertise. Unlike generic eBay chips, Turner Performance Chips utilize extensively tested, carefully designed fuel & spark maps, maximizing your BMW's performance without compromising engine health or driveability. Since 1995, Jim Conforti has fine-tuned the BMW driving experience, uncovering additional power and torque while enhancing throttle response. With over 10,000 units sold, Jim Conforti stands as the undisputed leader in BMW chip tuning—don't settle for imitations; your BMW deserves the best.

The BMW M20 inline six is renowned for its bulletproof reliability and ease of maintenance. Jim Conforti capitalizes on these strengths to discover additional power and torque without risking engine damage. Revitalize your M20, experiencing performance levels you never imagined, all while preserving the legendary reliability it's known for, thanks to the Turner Conforti Performance Chip.

  • Horsepower Gain: +15 @ 5,000 RPM
  • Torque Gain: +15 @ 5,000 RPM
  • New Rev Limit: 6,900 RPM
Show More Show Less
Turner Conforti Performance Chip - E30 M20 2.5L
For vehicles with a manual transmission & Bosch DME #0-261-200-173
Turner Conforti Performance Chips - Corporate Logo
T#:359583
Part#: 173-320
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Unleash the full potential of your BMW with the Turner Performance Chip – the easiest solution for adding power and torque. Engineered by BMW tuning legend Jim Conforti, these chips are meticulously designed to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is elevated, and fuel and spark maps are fine-tuned, ensuring your BMW performs beyond factory standards. No compromises here – each Turner Performance Chip is crafted to safely improve performance, maintaining driveability and enhancing responsiveness. Detailed instructions make installation a breeze, typically taking just an hour for enthusiasts with hand tools.

  • Dyno-tuned by BMW legend Jim Conforti for optimal performance
  • Designed for high-octane (91+) pump gas
  • Boosts mid-range torque and high-RPM horsepower
  • Fine-tuned fuel and spark maps for enhanced power
  • Maintains driveability and improves responsiveness
  • Easy installation with detailed instructions included
  • Horsepower Gain: +15 @ 5,000 RPM, Torque Gain: +15 @ 5,000 RPM
  • New Rev Limit: 6,900 RPM for an exhilarating driving experience
  • 30-day money-back guarantee for confidence in your purchase

Turner Performance Chips lead the BMW chip tuning industry, ensuring your BMW gets the performance it deserves.

Show More Show Less
Turner Motorsport
For 1987 models with a manual transmission and ECU number 0-261-200-173
Turner Conforti Performance Chips - Corporate Logo
T#:359493
Part#: 173-200
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, the rev limit is raised, and fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and toque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's M20 inline six has a well-deserved reputation for being bulletproof and easy to maintain. Jim Conforti leveraged those strengths to find additional power and torque, without risking engine damage. Wake up your M20 and see performance you never thought possible, all while maintaining the legendary reliability they are known for with a Turner Conforti Performance Chip. Horsepower Gain: +15 @ 5,000 RPM Torque Gain: +15 @ 5,000 RPM New Rev Limit: 6,900 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:359531
Part#: 380-310
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, the rev limit is raised, and fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and toque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's M20 inline six has a well-deserved reputation for being bulletproof and easy to maintain. Jim Conforti leveraged those strengths to find additional power and torque, without risking engine damage. Wake up your M20 and see performance you never thought possible, all while maintaining the legendary reliability they are known for with a Turner Conforti Performance Chip. Horsepower Gain: +15 @ 5,000 RPM Torque Gain: +15 @ 5,000 RPM New Rev Limit: 6,900 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:359486
Part#: 153-210
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
The catalytic converter is an emissions device that converts the exhaust gasses exiting the engine into a less toxic substance. This is achieved through the internal honeycomb monolith, washcoat, and the catalyst itself that commonly consists of a mix of precious metals. Unfortunately the catalytic converters do not last forever, and can be damaged if the engine is running too rich on fuel. If you're getting an oxygen sensor fault, and the sensor is ok, the likely cause is a failed catalytic converter. Relieve worry about an upcoming emissions test and replace your faulty or damaged catalytic converter. Stainless steel construction Federal Emissions compliant design Formulated for Gas and Diesel Applications
Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:359487
Part#: 153-300
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, the rev limit is raised, and fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and toque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's M20 inline six has a well-deserved reputation for being bulletproof and easy to maintain. Jim Conforti leveraged those strengths to find additional power and torque, without risking engine damage. Wake up your M20 and see performance you never thought possible, all while maintaining the legendary reliability they are known for with a Turner Conforti Performance Chip. Horsepower Gain: +15 @ 5,000 RPM Torque Gain: +15 @ 5,000 RPM New Rev Limit: 6,900 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:386792
Part#: 525-310
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping on orders $49 and up
If you're looking for the easiest way to add power and torque to your BMW, a Turner Performance Chip is answer to your prayers. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to make the most of high-octane (91+) pump gas and boost mid-range torque and high-RPM horsepower. To make the most of these improvements, the rev limit is raised, and fuel and spark maps are fine-tuned to make your BMW perform better than it did when it left the factory. There is no downside to installing a Turner Performance Chip - each chip is designed to safely improve performance, while maintaining driveability and improving responsiveness. All chips are shipped with detailed instructions and are typically installed in an hour by an enthusiast with hand tools. Turner Motorsport and Jim Conforti have over 20 years of experience with making your BMW come alive with software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested, carefully designed fuel & spark maps designed to get the most performance out of your BMW without risking engine damage or reducing driveability. Since 1995, Jim Conforti has been using his expertise to fine tune the BMW driving experience by finding more power and toque and improving throttle response. With over 10,000 units sold, it's no surprise that Jim Conforti is widely regarded as the leader in BMW chip tuning. Don't be fooled by imitators - your BMW deserves the best. BMW's M20 inline six has a well-deserved reputation for being bulletproof and easy to maintain. Jim Conforti leveraged those strengths to find additional power and torque, without risking engine damage. Wake up your M20 and see performance you never thought possible, all while maintaining the legendary reliability they are known for with a Turner Conforti Performance Chip. Horsepower Gain: +15 @ 5,000 RPM Torque Gain: +15 @ 5,000 RPM New Rev Limit: 6,900 RPM Installation instructions included. Turner is so confident you will be delighted by your new no-downside power, torque, and overall performance, that they offer a 30 day money back guarantee on this product, serviced by ECS Tuning.
Show More Show Less
Turner Conforti Performance Chips - Corporate Logo
T#:4119
Part#: 071-250
In Stock
Sale - Save 20% $ 254.95

This product was last offered at the strikethrough price on
05-03-2026

$ 203.96 USD
Free Shipping
Sale - Save 20%
$ 254.95

This product was last offered at the strikethrough price on
05-03-2026

$ 203.96 USD
Free Shipping

This is the same Conforti-tuned performance chip developed for the Turner 2.5 conversion package. If you're putting together your own conversion this is the finishing touch! This chip is set up around 91 octane and the specs of our 2.5L engine upgrade -

  • Sport Evo 2.5 crank
  • 11.25:1 compression
  • stock cams
  • stock air flow meter and intake
  • stock fuel injectors

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour.

This performance chip fits the following BMWs:
1987-1992 E30 BMW M3 (Turner 2.5L Conversion)

Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:359545
Part#: 380-200
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Unlock the full potential of your BMW with the Turner Performance Chip, the simplest way to add power and torque. These chips, expertly tuned by BMW legend Jim Conforti, are meticulously designed to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. This upgrade also raises the rev limit and fine-tunes fuel and spark maps, ensuring your BMW outperforms its factory settings. There are no drawbacks to installing a Turner Performance Chip, each one tailored to safely enhance performance while maintaining drivability and responsiveness. Installation is straightforward and can be completed in about an hour with basic hand tools.

  • Designed to provide significant power and torque improvements.
  • Expertly dyno-tuned by Jim Conforti, a renowned BMW tuning authority.
  • Precision fuel and spark maps improve BMW performance without compromising safety or driveability.
  • Raises the rev limit for enhanced high-RPM power.
  • Detailed installation instructions are included, making it suitable for automotive enthusiasts.
  • Each chip is crafted to fit seamlessly and safely in your BMW.

For over two decades, Turner Motorsport and Jim Conforti have been at the forefront of software tuning, ensuring that your BMW reaches its peak potential. They set their performance chips apart from eBay alternatives with extensively tested and meticulously designed fuel and spark maps, enabling you to experience superior performance without risking engine damage. Jim Conforti's expertise, dating back to 1995, has consistently improved BMW driving experiences, boosting power and enhancing throttle response. With a remarkable track record of over 10,000 units sold, Jim Conforti stands as the leading figure in BMW chip tuning. Choose the best for your BMW - don't be fooled by imitators.

The BMW M20 inline-six engine is celebrated for its legendary reliability and ease of maintenance. Jim Conforti leverages these strengths to extract additional power and torque without compromising the engine's durability. Experience the untapped performance potential of your M20 while retaining its renowned reliability with the Turner Conforti Performance Chip.

Key Performance Gains:

  • +15 HP at 5,000 RPM
  • +15 lb-ft of torque at 5,000 RPM
  • New Rev Limit: 6,900 RPM

The Turner Performance Chip includes detailed installation instructions to facilitate a smooth and hassle-free setup process. Turner is so confident that you will be thrilled with the remarkable power, torque, and overall performance improvements that they offer a 30-day money-back guarantee on this product, backed by ECS Tuning's service.

Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:359475
Part#: 0710-3100
In Stock
Sale - Save 20% $ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 239.20 USD
Free Shipping
Sale - Save 20%
$ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 239.20 USD
Free Shipping

Unleash the full potential of your BMW with the Turner Performance Chip, the easiest way to add power and torque to your vehicle. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are designed to maximize performance and are a game-changer for your high-octane (91+) pump gas.

  • Designed for a significant power and torque boost.
  • Fine-tuned fuel and spark maps improve your BMW's performance without compromising safety or driveability.
  • Each chip is shipped with comprehensive instructions for easy installation with basic hand tools.
  • Turner Motorsport and Jim Conforti bring over two decades of experience in software tuning to ensure top-notch quality.
  • Extensively tested and carefully designed fuel and spark maps, setting them apart from eBay chips.
  • With over 10,000 units sold, Jim Conforti is a renowned leader in BMW chip tuning, delivering the best for your BMW.

The E30 M3, a legendary classic, can experience remarkable high-RPM horsepower and torque gains.

This chip tuning maintains the essence of the E30 M3 while enhancing its performance for the 21st century.

Turner offers a 30-day money-back guarantee, backed by ECS Tuning's service, ensuring your satisfaction.

Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149938
Part#: VTD.YPIPE.63MM
Ships in 3 Business Days
New Item
$ 40.99 USD
Free Shipping
$ 40.99 USD
Free Shipping
Perfect for when you need to connect a single muffler to dual piping or add two tips to your single muffler!
Valvetronic Designs - Corporate Logo
T#:53149956
Part#: UVM.63MM.X2
Ships in 2 Business Days
New Item
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.
Show More Show Less


ACT - Corporate Logo
T#:14221793
Part#: BM17-HDR6
In Stock at Vendor
Sale - Save 10% $ 820.00

This product was last offered at the strikethrough price on
07-22-2026

$ 738.00 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 820.00

This product was last offered at the strikethrough price on
07-22-2026

$ 738.00 USD
Free Shipping on orders $49 and up
BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.
Valvetronic Designs - Corporate Logo
T#:53114634
Part#: VTDTIPSW3035BRSH
In Stock
New Item
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less

Turner Conforti Performance Chips - Corporate Logo
T#:385974
Part#: 524-300
In Stock
Sale - Save 20% $ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping
Sale - Save 20%
$ 249.00

This product was last offered at the strikethrough price on
05-03-2026

$ 199.20 USD
Free Shipping

Turner Performance Chip: Unleash Your BMW's Hidden Power

Elevate your BMW's performance effortlessly with the Turner Performance Chip, your answer to increased power and torque. Dyno-tuned by BMW tuning legend Jim Conforti, this high-quality chip is meticulously designed to make the most of high-octane (91+) pump gas, delivering impressive mid-range torque and high-RPM horsepower. Discover the compelling features of this remarkable product:

  • Unlock your BMW's hidden potential with the Turner Performance Chip, designed for optimal use of high-octane (91+) pump gas. This chip is your key to experiencing remarkable mid-range torque and high-RPM horsepower, meticulously tuned by the legendary Jim Conforti.
  • Enjoy the thrill of improved performance as the Turner Performance Chip raises the rev limit and fine-tunes fuel and spark maps, surpassing your BMW's factory performance levels. The result is a safer, more drivable, and highly responsive vehicle.
  • Experience an easy installation process, aided by detailed instructions. Enthusiasts with basic hand tools can typically complete the installation in just an hour.
  • Turner Motorsport and Jim Conforti bring over 20 years of expertise in BMW software tuning to your service. Their commitment to quality stands out, as the Turner Performance Chips feature meticulously tested and carefully designed fuel and spark maps, ensuring peak performance without compromising engine integrity or drivability.
  • Jim Conforti, an esteemed figure in the field, has been perfecting the BMW driving experience since 1995. With over 10,000 units sold, he is widely recognized as the leader in BMW chip tuning. Choose the best for your BMW and avoid imitations.
  • The BMW M20 inline six engine is celebrated for its durability and ease of maintenance. Jim Conforti leverages these strengths to find additional power and torque without compromising the engine's legendary reliability. Upgrade your M20 with the Turner Conforti Performance Chip for newfound power.
  • Key Performance Metrics: - Horsepower Gain: +15 @ 5,000 RPM - Torque Gain: +15 @ 5,000 RPM - New Rev Limit: 6,900 RPM
  • Rest assured with included installation instructions, ensuring a straightforward process for enthusiasts.
  • Turner's confidence in the product's ability to enhance power, torque, and overall performance is backed by a 30-day money-back guarantee, supported by ECS Tuning.
Show More Show Less

ACT - Corporate Logo
T#:54388433
Part#: PB1002
In Stock at Vendor
New Item
Sale - Save 10% $ 8.00

This product was last offered at the strikethrough price on
07-22-2026

$ 7.20 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 8.00

This product was last offered at the strikethrough price on
07-22-2026

$ 7.20 USD
Free Shipping on orders $49 and up
Valvetronic Designs - Corporate Logo
T#:53149955
Part#: UVM63MMTSTYLEX1
Ships in 1 Business Day
New Item
$ 499.99 USD
Free Shipping
$ 499.99 USD
Free Shipping
Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.
Show More Show Less

Valvetronic Designs - Corporate Logo
T#:53149932
Part#: VTDTIPSW3035BRT
Ships in 1 Business Day
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149927
Part#: VTDTIPSW2535BRSH
Ships in 1 Business Day
New Item
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less

ACT - Corporate Logo
T#:14221783
Part#: BM13-HDR4
In Stock at Vendor
Sale - Save 10% $ 1,535.00

This product was last offered at the strikethrough price on
07-22-2026

$ 1,381.50 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 1,535.00

This product was last offered at the strikethrough price on
07-22-2026

$ 1,381.50 USD
Free Shipping on orders $49 and up
BM13-HDR4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Show More Show Less

Valvetronic Designs - Corporate Logo
T#:53149925
Part#: VTDTIPSLVE2535RC
Ships in 5 Business Days
New Item
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149929
Part#: VTDTIPSW2540TIBR
Ships in 1 Business Day
New Item
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149933
Part#: VTDTIPSW2535BLK
Ships in 4 Business Days
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less


Valvetronic Designs - Corporate Logo
T#:53149953
Part#: UVM63MMDUALOUTX1
Ships in 1 Business Day
New Item
$ 399.99 USD
Free Shipping
$ 399.99 USD
Free Shipping
Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.
Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149931
Part#: VTDTIPSW3040TIBR
Ships in 1 Business Day
New Item
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less
ACT - Corporate Logo
T#:14221788
Part#: BM13-HDR6
In Stock at Vendor
Sale - Save 10% $ 1,554.00

This product was last offered at the strikethrough price on
07-22-2026

$ 1,398.60 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 1,554.00

This product was last offered at the strikethrough price on
07-22-2026

$ 1,398.60 USD
Free Shipping on orders $49 and up
BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Show More Show Less

Valvetronic Designs - Corporate Logo
T#:53149926
Part#: VTDTIPSLVE3035RC
Ships in 1 Business Day
New Item
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less

Valvetronic Designs - Corporate Logo
T#:53149923
Part#: VTD.TIP.SD.63MM
Ships in 4 Business Days
New Item
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149954
Part#: UVM63MMDUALOUTX2
Ships in 1 Business Day
New Item
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.
Show More Show Less

ACT - Corporate Logo
T#:14221780
Part#: BM13-HDG6
In Stock at Vendor
Sale - Save 10% $ 1,607.00

This product was last offered at the strikethrough price on
07-22-2026

$ 1,446.30 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 1,607.00

This product was last offered at the strikethrough price on
07-22-2026

$ 1,446.30 USD
Free Shipping on orders $49 and up
BM13-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149939
Part#: VTD.YPIPE.76MM
Ships in 1 Business Day
New Item
$ 40.99 USD
Free Shipping
$ 40.99 USD
Free Shipping
Perfect for when you need to connect a single muffler to dual piping or add two tips to your single muffler!

Valvetronic Designs - Corporate Logo
T#:53149963
Part#: UVM76MMTSTYLEX1
Ships in 1 Business Day
New Item
$ 499.99 USD
Free Shipping
$ 499.99 USD
Free Shipping
Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.
Show More Show Less

Valvetronic Designs - Corporate Logo
T#:53149961
Part#: UVM.89MM.X1
Ships in 1 Business Day
New Item
$ 399.99 USD
Free Shipping
$ 399.99 USD
Free Shipping
Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.
Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149958
Part#: UVM76MMDUALOUTX2
Ships in 1 Business Day
New Item
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.
Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149928
Part#: VTDTIPSW2535BRT
Ships in 1 Business Day
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less


Valvetronic Designs - Corporate Logo
T#:53149924
Part#: VTDTIPSLVE2535FC
Ships in 1 Business Day
New Item
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less
Valvetronic Designs - Corporate Logo
T#:53149957
Part#: UVM76MMDUALOUTX1
Ships in 1 Business Day
New Item
$ 399.99 USD
Free Shipping
$ 399.99 USD
Free Shipping
Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.
Show More Show Less