BMW 3 Series E30 (1984-1991)

Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

• Simplifies spacer usage with a single application designed for various spacer widths
• Wheel studs act as a wheel hanger, easing wheel installation
• Reduces constant wheel bolt removal, minimizing wear on wheel hubs
• Facilitates quick and easy tire changes as the studs stay in the hub
• Recommended torque of 15Nm with thread-locking compound during installation
• Compatible with spacers up to 20mm in size

All new hardware for installing your G260 on an M20 motor, including new dowels and 10mm bolt that goes from the engine side into the transmission.

Whether your refreshing the transmission, doing the clutch and flywheel or doing a manual swap get a new set of hardware for piece of mind and many more service intervals.

Kit Contents:

M12x45 Torx bolt - 23001222890 (QTY2)
M12x75 Torx bolt - 23001222893 (QTY2)
Washer - 07119906063 (QTY 4)
Dowel - 11117524470 (QTY2)
M8x50 ASA Bolt - 23001222887 (QTY 4)
Wave Washer - 07119904115 (QTY 4)
M6x16 Hex Bolt - 07119913015 (QTY 1)
M10x65 Torx Bolt - 07129904681 (QTY2)
Wave Washer - 07119904463 (QTY2)
Hex Nut - 07129904865 (QTY2)

E30 M3 Front Hub Assembly w/bearing. This bearing requires that you use your existing ABS ring. This is a simple press fit. This is an OEM Wheel Bearing Hub Assemblies made by FAG. GSP and FAG are the leaders in wheel bearing technology. These wheel hubs are the best you can buy. Alternate part number 31212225362.

FAG is an OE supplier to BMW as well as several other German marques. 

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.

This hub uses the ABS ring from the E28 5-series. For the E30 M3 the original ABS ring will need to be removed and installed on the new hub.

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

Key Features:

• 2" wide x 1/16" thick
• Durable, tightly woven, 100% fiberglass
• Reduce under hood temperatures
• Protect other engine components
• Protect your hands/arms from burns
• Each roll comes with 5 FREE, 14" long stainless steel zip ties

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. Included in this kit are high quality Red Line D4 ATF fluid and OEM filters, seals, and plugs.

Fits the following BMWs:
1978-1987 E23 BMW 733i 735i
1977-1989 E24 BMW 633CSi 635CSi
1982-1988 E28 BMW 528e 533i 535i/is
1984-1991 E30 BMW 318i/is 325i/is/ix 325e/es

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E30 BMW brake package are all of the OEM equivalent components needed to replace your Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Rear Brake Pads
• Zimmerman Rear Rotors
• New Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E30 BMW 318i/is 325e/es/i/is

Over time, the water pump in BMW vehicles becomes a common point of failure, typically requiring replacement around the 60,000-mile mark. To ensure optimal performance of your vehicle's cooling system, it's also advisable to replace the thermostat during this service. Turner aims to make this maintenance task easier with its all-in-one Water Pump & Thermostat Replacement Kit.

This comprehensive kit includes:

Water Pump - OEM Geba (11519071562) 80°C Thermostat - OEM MAHLE (11531713040) Thermostat Housing - URO Parts (11531730470) Thermostat Housing Gasket - Genuine BMW (11531722692) Antifreeze/Coolant, 1 Gallon - Genuine BMW (82141467704) Opt for this premium kit to ensure a thorough and reliable repair, extending the lifespan of your BMW's cooling system.

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED provides precise monitoring of engine oil pressure, ensuring that drivers can detect issues before they become catastrophic. This high-quality gauge is crucial for tracking engine performance and preventing potential damage.

• Accurate Oil Pressure Monitoring: Measures oil pressure from 0-100 PSI, helping to prevent engine damage by providing early warnings.
• Clear Lens: Offers a clear and unobstructed view of the gauge readings, making it easy to monitor engine health at a glance.
• White LED Backlighting: Enhances readability in low-light conditions with a bright and clear display.
• Complete Kit: Includes sender, mounting hardware, visor, decals, and instructions for easy installation.
• Durable Construction: Designed to withstand the demands of high-performance driving and continuous use.

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

• Digital Oil Temperature Guage (100-300 degrees) 
• Instructions
• Mounting hardware
• Decals
• Temperature sender - 1" long with 1/8" NPT threads
• Dual color display (Blue or Red)

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E30 BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E30 BMW M3

Enhance your BMW or MINI vehicle's performance monitoring with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White. This gauge provides accurate readings of boost pressure, ensuring you stay informed about your engine's performance at all times. With its stylish amber and white display, it not only looks sleek but also offers clear visibility day or night. Easy to install and compatible with a range of BMW and MINI models, this gauge is a must-have for enthusiasts looking to monitor their boost levels effectively.

• Accurately monitors boost pressure from 30inHg to 30 PSI
• Stylish amber and white display for clear visibility
• Enhances vehicle performance monitoring capabilities
• Easy installation process
• Compatible with various BMW and MINI models

Upgrade your BMW or MINI with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White to keep track of your boost levels with precision and style.

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Front Sway Bar End Links
Front Upper Strut Mounts
Control Arms w/ Bushings
Control Arm Brackets w/ M3 Control Arm Bushings
Outer Tie Rods

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

• Digital Oil Temperature Guage (100-300 degrees) 
• Instructions
• Mounting hardware
• Decals
• Temperature sender - 1" long with 1/8" NPT threads
• Dual color display (Green or White)

Ensure optimal engine monitoring for your BMW with the aftermarket 0-100 PSI gauge kit, offering enhanced visibility and early detection of potential issues. Avoid costly engine damage by monitoring engine functions at a glance, providing peace of mind and proactive maintenance.

• Improves engine monitoring beyond factory gauge capabilities
• Early detection of potential issues for preventive maintenance
• Comprehensive kit includes sender, mounting hardware, visor, decals, and instructions
• Compatible with BMW models for easy installation and reliable performance
• Note: Consider our Oil Filter Adaptor Plate for easier sender installation; Subaru owners can use Oil Galley plugs for direct engine block screw-in.