BMW 3 Series E30 (1984-1991)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

ACM - Corporate Logo
T#:555935
Part#: 64111370930ECS
Ships in 2 Business Days
$ 228.07 USD
Free Shipping
$ 228.07 USD
Free Shipping
If you are dealing with crickets in the dash, it is time to change out your blower motor! Over time the bearings can become faulty and being to cause squeaking at lower fan speeds and eventually at all speeds. Additionally, the fan motor can also fail, preventing any air from flowing through the vents.
Show More Show Less
JB Racing - Corporate Logo
T#:3769
Part#: 520-040-215
Ships on Oct 28, 2026
11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
11% off MSRP
$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9
Show More Show Less
Burger Motorsports - Corporate Logo
T#:9803960
Part#: BMWJACKPADRED4
Ships in 3 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

  • Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
  • Prevents damage to rocker panels or vehicle undercarriage
  • Made from solid billet aluminum for durability
  • Engraved Burger Motorsports logo for authenticity
  • Honeycomb grip pattern for stability during use
Show More Show Less

JB Racing - Corporate Logo
T#:385699
Part#: 520-060-228
Ships on Oct 29, 2026
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991  E30 BMW  325i 325ic 325is (with single-mass flywheel)
1989-1990  E34 BMW  525i (with single-mass flywheel)
Show More Show Less

Prosport Performance - Corporate Logo
T#:389617
Part#: 216EVOEOP.PSI
In Stock
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Pressure Guage (0-150 PSI) 
  • Instructions
  • Mounting hardware
  • Decals
  • Premium Electric Sender 
  • Wiring harness adapter
  • Dual color display (Blue or Red)
Show More Show Less
JB Racing - Corporate Logo
T#:3647
Part#: 520-110-215
Ships in 2 Business Days
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can be rebuilt too with a new clutch contact surface.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 16.5lbs
JB Flywheel Weight = 8lbs

This item fits the following BMWs:
1974-1976 2002 BMW 2002
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i
Show More Show Less

JB Racing - Corporate Logo
T#:3768
Part#: 520-050-228
Ships in 5 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

Stock Flywheel Weight = 19.5lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1987-1991 E30 BMW M3
Show More Show Less
Prosport Performance - Corporate Logo
T#:389634
Part#: 216EVOOT.F
Ships in 4 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or Red)
Show More Show Less

APEX Wheels - Corporate Logo
T#:180813
Part#: ARC8178ET25AN
Ships in 5 Business Days
$ 329.00 USD
Free Shipping
$ 329.00 USD
Free Shipping
17x8" ET25 4x100 Anthracite APEX ARC-8 Wheel 17.4lbs
Wheel Specs
Fitment:Front or Rear
Size:17x8.0"
Offset (mm):25
Weight (lbs):17.4
Profile:Flat, not concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

These APEX wheels are made specifically for the BMW E30 and 4x100 bolt pattern with a 57.1mm center bore. They are a direct fit to the E30 with no spacers or hub adapters required. An original BMW center cap and original lug bolts are used with these wheels unless spacers are in place (wheel bolts may vary if spacers are used). If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
Show More Show Less

Prosport Performance - Corporate Logo
T#:389613
Part#: 216EVOBO.PSI
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • 52mm Digital Boost Pressure Guage (30inHg - 35 PSI) 
  • Instructions
  • Tubing Kit
  • T-adapter
  • Premium Electric Sender
  • Mounting hardware
  • Blue or Red display
Show More Show Less
Prosport Performance - Corporate Logo
T#:389632
Part#: 216EVOVO
In Stock at Vendor
$ 71.99 USD
Free Shipping
$ 71.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Fuel Pressure Guage (8-18v) 
  • Instructions
  • Mounting hardware
  • Decals
  • Dual color display (Blue or red)
Show More Show Less
Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping


Griot's - Corporate Logo
T#:2119669
Part#: 51185
In Stock
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
Create rich, clinging foam for efficient removal of shine-stealing abrasives and grime, while effortlessly creating lasting gloss and protection via your pressure washer.
Prosport Performance - Corporate Logo
T#:389633
Part#: 216EVOWT.F
Ships in 2 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or red)
Show More Show Less
Prosport Performance - Corporate Logo
T#:389614
Part#: 216EVOWGBO.PSI
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • 52mm Digital Boost Pressure Guage (30inHg - 35 PSI) 
  • Instructions
  • Tubing Kit
  • T-adapter
  • Premium Electric Sender
  • Mounting hardware
  • Green or White display
Show More Show Less

Prosport Performance - Corporate Logo
T#:587021
Part#: 216BFWAEBOSM.PSI
In Stock
$ 80.99 USD
Free Shipping
$ 80.99 USD
Free Shipping

Enhance your BMW or MINI vehicle's performance monitoring with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White. This gauge provides accurate readings of boost pressure, ensuring you stay informed about your engine's performance at all times. With its stylish amber and white display, it not only looks sleek but also offers clear visibility day or night. Easy to install and compatible with a range of BMW and MINI models, this gauge is a must-have for enthusiasts looking to monitor their boost levels effectively.

  • Accurately monitors boost pressure from 30inHg to 30 PSI
  • Stylish amber and white display for clear visibility
  • Enhances vehicle performance monitoring capabilities
  • Easy installation process
  • Compatible with various BMW and MINI models

Upgrade your BMW or MINI with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White to keep track of your boost levels with precision and style.

Show More Show Less

Prosport Performance - Corporate Logo
T#:389622
Part#: 175CLSMARBO-R.PS
Back Ordered
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping

In boosted applications, it's crucial to know the amount of boost pressure you are carrying in order to optimize performance. This 45mm boost gauge from Prosport is the best way to do just that. Featuring a black face, with amber back lighting it will portray your information accurately without blinding you in the process. This guage is designed to used precision electric sensors, so you get the most accurate reading every time. 

Key Features:

  • 270 degree dial sweep
  • Track tested and race proven
  • Full gauge sweep on start up
  • Black face, red needle, amber backlit
  • 30inHg to 30PSI
  • 45mm diameter
  • Includes: Tubing kit, T-Adapter, Electric Sender, quick connect pigtail wiring, Decal and Instructions.
Show More Show Less
Prosport Performance - Corporate Logo
T#:389627
Part#: 216EVOWGOT.F
In Stock at Vendor
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less

Prosport Performance - Corporate Logo
T#:584307
Part#: 216BFWAOPSM.PSI
Ships in 2 Business Days
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping

Ensure optimal engine monitoring for your BMW with the aftermarket 0-100 PSI gauge kit, offering enhanced visibility and early detection of potential issues. Avoid costly engine damage by monitoring engine functions at a glance, providing peace of mind and proactive maintenance.

  • Improves engine monitoring beyond factory gauge capabilities
  • Early detection of potential issues for preventive maintenance
  • Comprehensive kit includes sender, mounting hardware, visor, decals, and instructions
  • Compatible with BMW models for easy installation and reliable performance
  • Note: Consider our Oil Filter Adaptor Plate for easier sender installation; Subaru owners can use Oil Galley plugs for direct engine block screw-in.
Show More Show Less
JB Racing - Corporate Logo
T#:3749
Part#: 520-120-228
In Stock
$ 854.00 USD
Free Shipping
$ 854.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

This flywheel replaces the stock original dual-mass flywheel and should only be used with the corresponding 'dual-mass' clutch kit. According to BMW the dual mass flywheel was installed in all 325/325e from 5/86 on but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 27.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es (with dual mass flywheel)
Show More Show Less

Prosport Performance - Corporate Logo
T#:557080
Part#: 216CLSDWABOU-R.P
In Stock at Vendor
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping

JB Racing - Corporate Logo
T#:3763
Part#: 520-070-228
Ships in 6 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325e up to 5/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 24.0lbs
JB Flywheel Weight = 8.5lbs

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es (with single mass flywheel)
Show More Show Less
Prosport Performance - Corporate Logo
T#:389623
Part#: 216EVOWGAFRWB4.9
Ships in 2 Business Days
$ 241.99 USD
Free Shipping
$ 241.99 USD
Free Shipping

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • AFR digital Gauge
  • Bosch 4.9  5 wire heated O2 sensor
  • Weld in Bung
  • Instructions
  • Wiring harness(Gauge to O2 sensor) 10 feet long
  • Plug and play wiring harness
  • Decals
  • 0-5 volt output signal for data logging
Show More Show Less
APEX ARC-8 Wheel Anthracite - Squared Set
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:597327
Part#: ARC81785ET20ANKT
Back Ordered
$ 1,304.00 USD
Free Shipping
$ 1,304.00 USD
Free Shipping

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

  • Enhanced strength and lightweight performance
  • Innovative Flow-formed semi-forging process
  • Average weight reduction of 10lbs or more
  • Ample room for brake systems
  • Classic motorsports design matches BMW's aggressive style
Show More Show Less


Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 7 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
Complete set of spark plug sockets.
Prosport Performance - Corporate Logo
T#:389624
Part#: 216EVOWGEFP.PSI
Ships in 2 Business Days
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Fuel Pressure Guage (0-100 PSI) 
  • Instructions
  • Premium fuel sender
  • Mounting hardware
  • Decals
  • Green or white display
Show More Show Less
Prosport Performance - Corporate Logo
T#:389626
Part#: 216EVOWGWT.F
Ships in 3 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less

Prosport Performance - Corporate Logo
T#:389625
Part#: 216EVOWGVO
Ships in 2 Business Days
$ 71.99 USD
Free Shipping
$ 71.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Volt Gauge (8-18v) 
  • Instructions
  • Mounting hardware
  • Decals
  • Dual color display (Green or White)
Show More Show Less

Prosport Performance - Corporate Logo
T#:389630
Part#: 216EVOAFRWB4.9
Ships in 2 Business Days
$ 241.99 USD
Free Shipping
$ 241.99 USD
Free Shipping

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • AFR digital Gauge
  • Bosch 4.9  5 wire heated O2 sensor
  • Weld in Bung
  • Instructions
  • Wiring harness(Gauge to O2 sensor) 10 feet long
  • Plug and play wiring harness
  • Decals
  • 0-5 volt output signal for data logging
Show More Show Less
Prosport Performance - Corporate Logo
T#:557084
Part#: 216CLSDWAWTU-R.F
Ships in 6 Business Days
$ 96.00 USD
Free Shipping
$ 96.00 USD
Free Shipping

Prosport Performance - Corporate Logo
T#:557081
Part#: 216CLSDWAWOTU-R.
Ships in 6 Business Days
$ 96.00 USD
Free Shipping
$ 96.00 USD
Free Shipping
Griot's - Corporate Logo
T#:2181291
Part#: 10983
In Stock
$ 84.99 USD
Free Shipping
$ 84.99 USD
Free Shipping
Griot's customers asked for a Griot's Garage ceramic... here it is. We've stepped up to create, formulate, and manufacture our own

Griot's - Corporate Logo
T#:2498338
Part#: B110G
Ships in 9 Business Days
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
Utilizing high loads of sub-micron abrasives, BOSS Fast Correcting Cream quickly removes severe defects while adding depth and clarity.

Griot's - Corporate Logo
T#:641197
Part#: 10908
Ships in 9 Business Days
$ 144.99 USD
Free Shipping
$ 144.99 USD
Free Shipping
The ALL-NEW G8 Mini Random Orbital Polisher has been engineered from the ground up to deliver the agility, power, and precision needed
Griot's - Corporate Logo
T#:641192
Part#: 10986
Ships in 9 Business Days
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
The World's best spray detailer now with SiO2 protection. It features an exclusive blend of advanced silane polymer technology combined with SiO2 to maintain an ultra-slick, insane- gloss finish in between more significant washing and protection processes
Show More Show Less
Griot's - Corporate Logo
T#:2135097
Part#: 10901
In Stock
$ 190.58 USD
Free Shipping
$ 190.58 USD
Free Shipping
At every turn the feature-rich G9 has the precise attention to detail... the nuance that makes great tools great.


Griot's - Corporate Logo
T#:580483
Part#: BF302
Ships in 9 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Meet the ultimate foam delivery system. In mere seconds THE BOSS Foam Cannon can blanket your car in rich, cleansing foam.
Griot's - Corporate Logo
T#:2181292
Part#: 10915
Ships in 9 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
Designed to perfection, the G15 has the power, pad rotation, and control to take your paint correcting to the next level.
Griot's - Corporate Logo
T#:2958758
Part#: B3203KT
Ships in 9 Business Days
$ 166.99 USD
Free Shipping
$ 166.99 USD
Free Shipping
The Brilliant Finish Foaming System is our top tier safest cleaning method period... and you'll get a kick out of washing your car with it.

Griot's - Corporate Logo
T#:4224041
Part#: 10913
Ships in 9 Business Days
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Undeniably, the most comfortable, powerful, and capable mini polisher available for efficient and professional-grade paint correction.

Sunex - Corporate Logo
T#:642035
Part#: 9914A
Ships on Nov 4, 2026
$ 113.91 USD
Free Shipping
$ 113.91 USD
Free Shipping
Radius V-Groove design creates an anti-slip while also preventing round-off.
Sunex - Corporate Logo
T#:5282862
Part#: 2850
Back Ordered
11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
11% off MSRP
$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models

17" APEX ARC-8 Square Wheel Set
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:19395595
Part#: ARC817825SQ
Ships in 4 Business Days
Starting at $ 1,316.00 USD
Free Shipping
Starting at $ 1,316.00 USD
Free Shipping
Apex ARC8 17x8" ET25 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
ACM - Corporate Logo
T#:149593
Part#: 64111466015
Back Ordered
$ 598.98 USD
Free Shipping
$ 598.98 USD
Free Shipping
This blower motor helps to supply the cabin of your BMW with either hot air from the heater core or cool air from the air conditioning system. Failing blower motors may not work at all or blow very little even under the highest settings. Another sign of a failing blower is a high pitched chirping sound, often heard at lower fan speeds. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

Griot's - Corporate Logo
T#:2181293
Part#: 10921
Ships in 9 Business Days
$ 259.99 USD
Free Shipping
$ 259.99 USD
Free Shipping
Need professional-grade paint correction? The feature-packed G21 is the most capable paint perfecting tool we’ve ever created.

APEX EC-7 18x8.5" ET45 Wheel Set
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:387452
Part#: EC7188545X4
Ships in 6 Business Days
Starting at $ 1,556.00 USD
Free Shipping
Starting at $ 1,556.00 USD
Free Shipping

Apex EC-7 18x8.5" Square Wheel Set

Apex 8.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. We have put this wheel set together using four APEX 8.5" wheels in a ET45 offset. A 8.5" wheel allows for 225-245 R-comp or performance tires.

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

 

Show More Show Less
APEX Solid Gloss Black BMW Center Caps - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
Ships in 10 Business Days
$ 9.99 USD
Free Shipping
$ 9.99 USD
Free Shipping
17" APEX ARC-8 Square Wheel Set
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:19329464
Part#: ARC817952ST
Ships in 5 Business Days
Starting at $ 1,356.00 USD
Free Shipping
Starting at $ 1,356.00 USD
Free Shipping
Apex ARC8 17x9" ET52 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less


Prosport Performance - Corporate Logo
T#:389635
Part#: 216EVOEGT.F
Ships on Oct 29, 2026
$ 150.99 USD
Free Shipping
$ 150.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Pyrometer Guage (400-2400 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • K type probe/sender - 6' long with 1/8" NPT threads
  • Dual color display (Blue or Red)
Show More Show Less
Apex ML-10RT18x9.5 ET22 Wheels
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:35492008
Part#: ML10RT1895ET22
Ships in 6 Business Days
$ 738.00 USD
Free Shipping
$ 738.00 USD
Free Shipping
18x9.5 ET22 5x120mm/ 72.56mm Race Silver