Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

• Simplifies spacer usage with a single application designed for various spacer widths
• Wheel studs act as a wheel hanger, easing wheel installation
• Reduces constant wheel bolt removal, minimizing wear on wheel hubs
• Facilitates quick and easy tire changes as the studs stay in the hub
• Recommended torque of 15Nm with thread-locking compound during installation
• Compatible with spacers up to 20mm in size

All new hardware for installing your G260 on an M20 motor, including new dowels and 10mm bolt that goes from the engine side into the transmission.

Whether your refreshing the transmission, doing the clutch and flywheel or doing a manual swap get a new set of hardware for piece of mind and many more service intervals.

Kit Contents:

M12x45 Torx bolt - 23001222890 (QTY2)
M12x75 Torx bolt - 23001222893 (QTY2)
Washer - 07119906063 (QTY 4)
Dowel - 11117524470 (QTY2)
M8x50 ASA Bolt - 23001222887 (QTY 4)
Wave Washer - 07119904115 (QTY 4)
M6x16 Hex Bolt - 07119913015 (QTY 1)
M10x65 Torx Bolt - 07129904681 (QTY2)
Wave Washer - 07119904463 (QTY2)
Hex Nut - 07129904865 (QTY2)

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E30 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E30 BMW 318i/is 325e/es/i/is

BMW E30 Washer Fluid Container Kit is the perfect solution for replacing your worn or damaged washer fluid tank, ensuring reliable performance and maintaining the pristine condition of your vehicle. This comprehensive kit includes everything needed for a hassle-free installation, such as a brand-new washer fluid tank, cap, pump, and mounting hardware. Designed to meet or exceed OEM standards, this kit guarantees durability and optimal functionality.

• Complete kit includes tank, cap, pump, and mounting hardware for convenience
• Ensures reliable washer fluid performance for clear visibility
• Direct fitment for BMW E30 models with no modifications required
• Durable construction meets or exceeds OEM standards
• Easy installation to restore functionality quickly

Upgrade your BMW E30's washer fluid system with this premium replacement kit and enjoy clear, streak-free visibility.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

• 5 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
• Liqui Moly UV Flashlight
• Mann Oil Filter Kit
• Febi Oil Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

New generation engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

• Smooth engine running characteristics
• Long engine service life due to exceptional protection against wear
• Rapid oil delivery at low temperatures
• Optimum oil pressure at all engine speeds
• Premium lubrication reliability at high and low temperatures
• High shear and ageing stability
• Reduces fuel consumption and pollutant emissions
• Outstanding engine cleanliness
• Tested with catalytic converters and performance proven with turbochargers
• Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

• ACEA C3
• API SN / CF
• VAG 502.00 / 505.00
• BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
1984-1991 E30 BWM 325, 325i/is/ix, 325e/es

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E30 BMW brake package are all of the OEM equivalent components needed to replace your Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Rear Brake Pads
• Zimmerman Rear Rotors
• New Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E30 BMW 318i/is 325e/es/i/is

If E30 needs a little more pep in the corners, this is an excellent suspension package. H&R Sport springs and Bilstein Sport shocks for the E30 will lower the ride height for an aggressive stance and stiffer springs will improve handling and balance in the corners. This suspension is a favorite among our E30 fans because the car corners better without a punishing ride. Perfect for daily-driven E30s who want to carry more speed through the corners.

H&R Sport springs lower the ride height by 1.25" and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.
 

Parts list:

• 1 set - H&R Sport Springs (50406)
• 1 pair - Bilstein Front Sport strut inserts (P36-0335 / 34-003350)
• 1 pair - Bilstein Rear Sport Shocks (B36-2027 / 24-020275)

Fitment note: Front strut inserts fit the larger 51mm strut housings. These were standard for all 6-cylinder E30s, all M3, and 1989-1992 318i/is. Other models used a smaller strut housing which requires a different Bilstein insert.

This item fits the following BMWs:
1984-1992 E30 BMW 325e 325es 325i 325ic 325is

Over time, the water pump in BMW vehicles becomes a common point of failure, typically requiring replacement around the 60,000-mile mark. To ensure optimal performance of your vehicle's cooling system, it's also advisable to replace the thermostat during this service. Turner aims to make this maintenance task easier with its all-in-one Water Pump & Thermostat Replacement Kit.

This comprehensive kit includes:

Water Pump - OEM Geba (11519071562) 80°C Thermostat - OEM MAHLE (11531713040) Thermostat Housing - URO Parts (11531730470) Thermostat Housing Gasket - Genuine BMW (11531722692) Antifreeze/Coolant, 1 Gallon - Genuine BMW (82141467704) Opt for this premium kit to ensure a thorough and reliable repair, extending the lifespan of your BMW's cooling system.

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

• Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
• Prevents damage to rocker panels or vehicle undercarriage
• Made from solid billet aluminum for durability
• Engraved Burger Motorsports logo for authenticity
• Honeycomb grip pattern for stability during use

BMW E30 Supersprint Exhaust Manifold And Rear Exhaust Kit

Upgrade your BMW E30 with the Supersprint Exhaust Manifold and Rear Exhaust Kit, specially designed for E30 models with an S54 engine swap. Engineered for performance and durability, this kit enhances your driving experience with its superior features:

• Increased horsepower and torque
• Enhanced exhaust note for a sportier sound
• Precision engineering for perfect fitment
• Improved exhaust gas flow for optimized engine performance

Transform your BMW E30 into a powerhouse on the road with the Supersprint Exhaust Manifold and Rear Exhaust Kit.

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

• Digital Water Temperature Guage (80-280 degrees) 
• Instructions
• Mounting hardware
• Decals
• Temperature sender - 1" long with 1/8" NPT threads
• Dual color display (Green or White)

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E30 BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E30 BMW M3