Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
These bushings have the hole off-center to give your car a little more track, caster, and camber. This style came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3 but will work with any E30, E36, Z3.
Rubber control arm bushings are designed to flex and absorb energy. That's fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars.
To save time, pick up a pair of new bushing carrier brackets and hardware. This will save you the time and hassle of pressing out the old bushings. This will especially save you time if you're buying new control arms at the same time (no time wasted removing the old brackets from the arms). Stainless steel set screws included.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product reinforces the metal swaybar link mounting point on the rear trailing arm. The sheet metal breaks off the trailing arm due to the constant up and down loads being placed on the trailing arm from the swaybar. Problems increase when larger sway bars are used. This product eliminates the problem by thickening the sheet metal and triangulating the mounting point. A good time to install this kit would be when you are doing any rear suspension work, exhaust, or even if you are just doing a differential fluid change. This part requires welding for installation. 
Click here for installation instructions.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Every E30 M3 that comes into our shop gets the front swaybar tab inspected. This is such a common problem but with an easy fix. If left to worsen you may be looking at an entire strut housing replacement. Fix it now with these reinforcing plates and a little welding! Not only will modified suspensions put stress on the mounts but age will reduce their strength as well. Reinforcing the swaybar mount to the strut will keep your swaybar geometry in spec and prevent a costly and ugly repair.
This product was last offered at the strikethrough price on
03-27-2026
This product was last offered at the strikethrough price on
03-27-2026
