BMW Sway Bar Kits for BMW 3 Series E30 (1984-1991)

There are a lot of enthusiasts still committed to the E30 3-series. For these owners, giving up their 318, 325, or M3 is out of the question. We've tried to make it harder for them to part with their cars by developing reinforcements for common weak areas of the E30 chassis. With these pieces, you can prevent a costly repair or total failure that could cost you lots of money. These are a must-have for any E30 restoration (yes, restoration is the right word these days) or even during normal suspension work. Included in this package are reinforcements for:

• front subframe
• rear sway bar / swaybar tabs (from trunk floor)
• rear lower sway bar tab (on trailing arm)
• optional front sway bar tab (M3 only)

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1982 - 1991 E30 318i 318is 325 325e 325es 325i 325is 325iC 325ix

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM Lemförder sway bar links are the perfect option to restore body control and eliminate knocking noises.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This stock replacement sway bar / swaybar link secures the rear sway bar ends to the chassis. Over time the rubber breaks down and can cause poor handling. Alternate part number 33551124375.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1983-1989 E24 BMW 633csi 635csi M6
1982-1987 E23 BMW 733i 735i

The Powerflex Sway Bar Link Rod Bushing is a high-performance component designed for BMW models including the E36, E30, Z3, and Z1. These bushings are engineered to enhance the suspension system's performance by providing a more rigid connection between the sway bar and link rod.

Key Features:

1. High-Performance Polyurethane Construction:

   • Made from premium polyurethane, these bushings offer superior strength and durability compared to standard rubber bushings. They are designed to withstand the rigors of aggressive driving, providing long-lasting performance.

2. Reduced Flex and Improved Response:

   • Powerflex bushings minimize unwanted flex during cornering, allowing for better control and more immediate response from the suspension. This results in improved handling and reduced body roll, enhancing the overall driving experience.

3. Enhanced Stability:

   • By maintaining proper alignment between the sway bar and suspension components, these bushings contribute to greater stability during dynamic driving situations, making them ideal for both everyday use and performance applications.

4. Precision Fit for Multiple Models:

   • Specifically designed for the E36, E30, Z3, and Z1, these bushings ensure a perfect fit for seamless installation, allowing you to upgrade your vehicle’s suspension without hassle.

5. Easy Installation:

   • Replacing the sway bar link rod bushings is typically a straightforward task that can be performed with basic tools. While DIY enthusiasts can tackle this upgrade, professional installation is always recommended for optimal results.

6. Versatile Performance Enhancement:

   • Whether you're navigating city streets, enjoying spirited drives, or hitting the track, these bushings provide improved handling characteristics across a variety of driving conditions.

Advantages of Powerflex Bushings:

• Improved Cornering Ability: The firmer bushing design allows for less body roll and greater cornering stability, making your driving experience more exhilarating and controlled.
• Enhanced Steering Feedback: Fresh bushings contribute to a more connected feel between the driver and the road, resulting in increased steering precision and responsiveness.
• Longevity and Reliability: The high-quality polyurethane construction ensures these bushings will outlast traditional rubber options, minimizing the need for frequent replacements.

In summary, the Powerflex Sway Bar Link Rod Bushing is an essential upgrade for owners of BMW E36, E30, Z3, and Z1 models looking to improve their vehicle's suspension performance. With enhanced durability, responsiveness, and handling characteristics, these bushings are key to unlocking the full potential of your BMW’s driving dynamics.

The Powerflex 17mm Rear Sway Bar Bushings for the BMW E24 and E28 provide a performance-oriented upgrade that enhances the handling and stability of these classic models. By replacing the standard rubber bushings with high-quality polyurethane, these bushings ensure that the rear sway bar operates at its full potential.

Key Benefits:

1. Enhanced Stability During Cornering: The firmer polyurethane composition minimizes flex in the sway bar, resulting in reduced body roll and improved stability when navigating corners.
2. Long-Lasting Durability: Designed to resist wear from oil, heat, and environmental exposure, these bushings outlast traditional rubber options, ensuring reliable performance over time.
3. Improved Responsiveness: The reduced movement in the sway bar mounting allows for a more direct steering response, giving drivers a better connection to the road.
4. Designed for 17mm Sway Bars: Tailored specifically for BMW E24 and E28 models with a 17mm rear sway bar, these bushings offer easy installation and a perfect fit.

This upgrade is ideal for BMW owners looking to enhance their vehicle's handling characteristics, providing a more engaging driving experience while maintaining durability for both everyday use and spirited driving.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1982 - 1988 E28 524td 528e 533i 535i 535is 

The BMW E30 3 Series Front Sway Bar Bushing (18.5mm) is a key suspension component designed for the legendary E30 models produced between 1984 and 1991. These bushings are integral to the performance of the front sway bar, helping to enhance stability and handling during cornering.

Key Features:

1. Designed for 18.5mm Sway Bars:

   • These bushings are specifically tailored for E30 models equipped with an 18.5mm front sway bar, ensuring a perfect fit and maximum effectiveness.

2. Functionality:

   • The front sway bar bushings connect the sway bar to the chassis, allowing it to work effectively in reducing body roll during turns. This connection improves the vehicle's overall stability and handling characteristics.

3. Material Choices:

   • Available in both rubber and polyurethaneoptions:
     • Rubber bushings offer a smooth, quiet ride and excellent shock absorption but may wear out more quickly.
     • Polyurethane bushings provide enhanced durability and performance, with less flex and improved handling, making them a preferred choice for performance-oriented drivers.

4. Performance Enhancement:

   • Replacing old or worn bushings can lead to noticeable improvements in handling, providing better control and responsiveness during cornering. This results in less body roll and a more planted feel on the road.

5. Compatibility:

   • Specifically designed for the BMW E30 3 Series, these bushings help maintain the vehicle’s signature handling and driving dynamics, making them essential for both daily driving and spirited excursions.

6. Installation Process:

   • Installing new sway bar bushings usually involves removing the sway bar from the vehicle. While experienced DIY enthusiasts can manage this task, professional installation is recommended for proper alignment and performance.

Benefits of Replacing or Upgrading:

• Improved Handling and Stability: New bushings provide a more direct connection between the sway bar and chassis, resulting in enhanced cornering stability and reduced body roll.
• Better Steering Feedback: Fresh bushings allow for more precise steering response, giving drivers a greater sense of control and connection to the road.
• Increased Durability: Upgrading to polyurethane bushings extends the lifespan of the sway bar system, minimizing the frequency of replacements.

In summary, the BMW E30 3 Series Front Sway Bar Bushing (18.5mm) is a vital component for maintaining the performance and handling of these classic BMWs. Whether replacing worn bushings or upgrading to polyurethane for better durability and performance, ensuring that these components are in top condition is essential for enjoying the renowned driving experience of the E30.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1985 - 1991 E30 M3 

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left- and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 175mm (6.89") to 235mm (9.25") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints (M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability NOTE: If you've modified your vehicle's suspension with aftermarket struts or coilovers, the mounting location for the sway bar end link may have moved. To confirm fitment with our adjustable end links, please measure the distance between the sway bar and the mounting location on the strut body with the vehicle at ride height and confirm that it is within the 175 - 235mm range of adjustment.