BMW Drivetrain Parts for BMW 3 Series E30 (1984-1991)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

OEM Febi Universal Flex Disc - Multiple BMWs
For vehicles with manual transmission only For all vehicles with automatic transmission. Also for vehicles with manual transmissio...
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363814
Part#: 26117511454
In Stock at Vendor
$ 81.99

This product was last offered at the strikethrough price on
07-20-2026

$ 75.99 USD
Free Shipping on orders $49 and up
$ 75.99 USD
Free Shipping on orders $49 and up
Located between the transmission and driveshaft, the giubo (also guibo) joint is a flexible rubber drive coupling that joins driveline components to reduce vibration, while allowing a limited range of flexibility. Joint rubber deteriorates over time from torque stress and heat hardening. A failed joint is a common cause of driveline noise and vibration. This joint should be inspected during normal maintenance for signs of heat cracking and tears in the rubber. Failed joints should be replaced before they cause additional damage and expense or disable the vehicle.
Show More Show Less
Clutch Slave Cylinder - E30 including M3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:3573
Part#: 21521116300
In Stock
$ 35.00

This product was last offered at the strikethrough price on
06-26-2026

$ 28.99 USD
Free Shipping on orders $49 and up
$ 28.99 USD
Free Shipping on orders $49 and up
This is a replacement clutch slave cylinder, made by a high quality OEM manufacturer. It fits all 1984-1991 3 series, including M3, 318i, 318is, 325, 325e, 325es, 325i, 325is, 325ic, and 325ix.
Febi - Corporate Logo
T#:3200
Part#: 21521156000
In Stock
$ 81.99

This product was last offered at the strikethrough price on
07-14-2026

$ 71.99 USD
Free Shipping
$ 71.99 USD
Free Shipping
This Clutch Master Cylinder (input cylinder). If you have noticed your pedal going to the floor or not being able to disengage the clutch the problem could be either this master cylinder or the clutch slave cylinder.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
Show More Show Less

Febi Shift Tower Mount - E10, E21, E23, E24, E28, E30
For vehicles with production date up to 06/1986 For vehicles with production date up to 06/1985
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:7617
Part#: 25111208580
In Stock at Vendor
$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up
BMW GEARSHIFT SUPPORTING BRACKET 25111208580

Flex Disc - Guibo - E21 E28 E30 E36 Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:359528
Part#: 26111225624
In Stock
$ 70.99 USD
Free Shipping on orders $49 and up
Replacement guibo made by  Febi . 110mm diameter x 28mm width - for:

1977-1983  E21  - 320i
1983-5/1986  E28  - 528e - Manual Transmission
5/1986-1988  E28  - 528e - Manual or Automatic Transmission
1984-1991  E30  - 318i, 318is, & 318ic
1984-1986  E30  - 325e/es (thru 04/1986)
1986-1991  E30  - 325i, 325is, 325ic
1987-1991  E30  - 325ix
1992-1997  E36  - 318i 318is 318ic - For Automatic Transmission only
1996-1998  Z3  - Z3 1.9 liter roadster
Show More Show Less
Febi Rear Wheel Bearing - E30, E82, E88, E90, E92, Z4
For vehicles with production date from 09/1985
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382096
Part#: 33416762317
Ships on Sep 18, 2026
$ 35.99 USD
Free Shipping on orders $49 and up
$ 35.99 USD
Free Shipping on orders $49 and up
Does not include hardware

Febi Febi Manual Transmission Fluid (75w-80) - 1 Liter
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:1180762
Part#: G052911
In Stock
$ 29.99

This product was last offered at the strikethrough price on
07-10-2026

$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
Fully synthetic high performance GL-5 gear oil excellent lubricating properties, high ageing resistance, and high wetting and adhesion properties
JB Racing - Corporate Logo
T#:3769
Part#: 520-040-215
Back Ordered
11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
11% off MSRP
$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9
Show More Show Less

SACHS Performance - Corporate Logo
T#:393810
Part#: 053151231031
In Stock
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping

Improved bearing from Sachs Performance that is designed for a performance oriented clutch system. Resists wear and damage from increased spring pressure and higher engagement RPM's.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Performance equivalent of BMW part #'s:

  • 1 207 275
  • 1 208 423
  • 1 223 168
  • 1 223 366
  • 1 225 203
Show More Show Less

JB Racing - Corporate Logo
T#:3768
Part#: 520-050-228
Ships in 4 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

Stock Flywheel Weight = 19.5lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1987-1991 E30 BMW M3
Show More Show Less
JB Racing - Corporate Logo
T#:385699
Part#: 520-060-228
Ships on Aug 5, 2026
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991  E30 BMW  325i 325ic 325is (with single-mass flywheel)
1989-1990  E34 BMW  525i (with single-mass flywheel)
Show More Show Less
JB Racing - Corporate Logo
T#:3647
Part#: 520-110-215
Ships in 2 Business Days
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can be rebuilt too with a new clutch contact surface.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 16.5lbs
JB Flywheel Weight = 8lbs

This item fits the following BMWs:
1974-1976 2002 BMW 2002
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i
Show More Show Less


Febi Front Wheel Hub/Bearing Assembly - E30
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382532
Part#: 31211131297
Ships on Aug 19, 2026
$ 65.99 USD
Free Shipping
$ 65.99 USD
Free Shipping
Includes wheel bearing
Febi Rear Wheel Bearing - E30, E36, Z3
Up to production date 09/1985
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382092
Part#: 33411124358S1
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
$ 39.99 USD
Free Shipping on orders $49 and up
Includes axle nut & circlip
Automatic Transmission Fluid
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:16840502
Part#: 81229400272
In Stock at Vendor
$ 24.99

This product was last offered at the strikethrough price on
05-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up
Automatic transmission fluid is specially formulated to lubricate and cool transmission components, and acts as hydraulic fluid to engage pistons, valves, and clutch packs. ATF, as it is commonly called, also contains special additives to inhibit rust formation, prevent foaming, reduce wear and corrosion, improve flow at temperature extremes, and lubricate seals and gaskets. Regular fluid and filter changes remove unwanted contaminants and renew protective additives in the fluid that are depleted over time. A periodic transmission service improves transmission performance and helps prevent costly damage.
Show More Show Less

Performance Throw-out Bearing
2X Entries For Our G87 M2 Sweepstakes!
SACHS Performance - Corporate Logo
T#:583039
Part#: 53151600791
Ships in 4 Business Days
$ 104.00 USD
Free Shipping
$ 104.00 USD
Free Shipping

Febi Clutch Release/Throw-Out Bearing
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382440
Part#: 21517521471
Back Ordered
$ 64.99 USD
Free Shipping on orders $49 and up
$ 64.99 USD
Free Shipping on orders $49 and up
Should be replaced each time the clutch is replaced
SACHS Performance - Corporate Logo
T#:393842
Part#: 881864999739
In Stock
$ 465.99

This product was last offered at the strikethrough price on
05-03-2026

$ 403.99 USD
Limited Qty Sale
Free Shipping
$ 465.99

This product was last offered at the strikethrough price on
05-03-2026

$ 403.99 USD
Limited Qty Sale
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for aggressive track applications such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

JB Racing - Corporate Logo
T#:3763
Part#: 520-070-228
Ships in 5 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325e up to 5/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 24.0lbs
JB Flywheel Weight = 8.5lbs

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es (with single mass flywheel)
Show More Show Less
JB Racing - Corporate Logo
T#:3749
Part#: 520-120-228
Ships in 1-2 days
$ 854.00 USD
Free Shipping
$ 854.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

This flywheel replaces the stock original dual-mass flywheel and should only be used with the corresponding 'dual-mass' clutch kit. According to BMW the dual mass flywheel was installed in all 325/325e from 5/86 on but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 27.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es (with dual mass flywheel)
Show More Show Less

Febi Transmission Oil Filter - E23, E24, E28, E30, E32
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:372830
Part#: 24311218550
Ships in 1 day
$ 27.99 USD
Free Shipping on orders $49 and up
$ 27.99 USD
Free Shipping on orders $49 and up
Includes O-Ring

SACHS Performance - Corporate Logo
T#:393868
Part#: 883082999618KT1
Ships in 5 Business Days
$ 1,000.99 USD
Free Shipping
$ 1,000.99 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

  • Performance Throwout Bearing - Designed for increased spring pressure and higher RPM function

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
SACHS Performance - Corporate Logo
T#:393866
Part#: 883082999618KT
Ships in 5 Business Days
$ 1,016.00 USD
Free Shipping
$ 1,016.00 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

  • Performance Throwout Bearing - Designed for increased spring pressure and higher RPM function

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
Sachs Performance Organic Clutch Disc - E10 E30 E28 E34
2X Entries For Our G87 M2 Sweepstakes!
SACHS Performance - Corporate Logo
T#:393821
Part#: 181862168232
Ships in 5 Business Days
$ 481.00 USD
Free Shipping
$ 481.00 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for both performance street and light to moderate track applications such as occasional endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Rated for 258 ft/lb torque.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less


Sachs Performance Pressure Plate - E10 E30 E28 E34
2X Entries For Our G87 M2 Sweepstakes!
SACHS Performance - Corporate Logo
T#:1434
Part#: 883082999618
Ships in 5 Business Days
$ 431.00 USD
Free Shipping
$ 431.00 USD
Free Shipping

Experience longer life and less slippage with this Sachs Performance pressure plate for use with sport/racing clutch discs. This pressure plate offers more clamping power, and is recommended for cars making significantly more hp than stock (forced injection, etc) while using a stock flywheel. This is NOT for use on cars with an aftermarket flywheel (stock flywheel only).

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
SACHS Performance - Corporate Logo
T#:393843
Part#: 881864999758
Special Order: No Guaranteed ETA
$ 448.99 USD
Free Shipping
$ 448.99 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for aggressive track applications such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
Febi Subframe Mount Bushing - E30
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:3660
Part#: 33311129144
In Stock
$ 19.99

This product was last offered at the strikethrough price on
07-10-2026

$ 15.99 USD
Free Shipping on orders $49 and up
$ 15.99 USD
Free Shipping on orders $49 and up
The E30 rear subframe is held into the chassis by two bolts going through these rubber mounts. A lot of suspension motion, chassis flex, and driveline torque has to go through these two points, which makes them notorious for failure. When they do, the subframe will move around, playing havoc with your suspension's alignment and settings and making a very annoying clunk. These are direct replacement rubber mounts, sold as a pair. This item fits the following BMWs: 1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
Show More Show Less

Febi Transmission Mount - E23, E24, E28, E30
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363813
Part#: 23711175939
In Stock
$ 18.99 USD
Free Shipping on orders $49 and up
$ 18.99 USD
Free Shipping on orders $49 and up
Stop driveline vibration

Febi - Corporate Logo
T#:381870
Part#: 23121205340
In Stock
$ 5.23 USD
Free Shipping on orders $49 and up
Located on the tail stock of the transmission
Rear Wheel Bearing Nut
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:5045
Part#: 33411132565
In Stock
$ 7.99

This product was last offered at the strikethrough price on
04-16-2026

$ 6.11 USD
Free Shipping on orders $49 and up
$ 6.11 USD
Free Shipping on orders $49 and up
This is the nut for the rear wheel bearing that threads onto the rear axle shaft.

This item fits the following BMWs:
2008+ E82 BMW 128i
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci
2006+ E90 BMW 325i 328i
2006+ E91 BMW 328i
2007+ E92 BMW 328i
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si
Show More Show Less

Febi Pilot Bearing
For vehicles with manual transmission only
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:340706
Part#: 11211720310
In Stock
Sale - Save 54% $ 13.99

This product was last offered at the strikethrough price on
05-14-2026

$ 6.45 USD
Free Shipping on orders $49 and up
Sale - Save 54%
$ 13.99

This product was last offered at the strikethrough price on
05-14-2026

$ 6.45 USD
Free Shipping on orders $49 and up
Replace with every clutch service
Selector Shaft Seal - Priced Each
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:16208928
Part#: 23111204223
In Stock
$ 7.99

This product was last offered at the strikethrough price on
04-15-2026

$ 6.99 USD
Free Shipping on orders $49 and up
$ 6.99 USD
Free Shipping on orders $49 and up

Rear Wheel Bearing Nut - E30 Z3 E36 318ti
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:5046
Part#: 33411125664
In Stock
$ 4.55

This product was last offered at the strikethrough price on
04-15-2026

$ 4.07 USD
Free Shipping on orders $49 and up
$ 4.07 USD
Free Shipping on orders $49 and up
This is the nut for the rear wheel bearing that threads onto the rear axle shaft.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318ti
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

Also used for front axle shaft on
1984-1991 E30 BMW 325ix
Show More Show Less

Rear Axle Shaft Seal - E30 E36 E34 Z3 E28 E32
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:7916
Part#: 33107505602
Ships on Oct 15, 2026
$ 11.99 USD
Free Shipping on orders $49 and up
This is the rear axle shaft seal that goes between the differential and the rear axle shaft. The dimensions are 67 x 44 x 10.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is
1989-1995 E34 BMW 525i 530i 535i
1983-1989 E24 BMW 633csi 635csi
1982-1987 E23 BMW 733i 735i
1988-1992 E32 BMW 735i 735il
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Show More Show Less
Febi - Corporate Logo
T#:363762
Part#: 26111209497
In Stock
$ 21.99

This product was last offered at the strikethrough price on
04-15-2026

$ 15.36 USD
Free Shipping on orders $49 and up
$ 15.36 USD
Free Shipping on orders $49 and up
Attaches the two halves of the driveshaft
Febi Front Hub Nut - E30
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:376065
Part#: 31211125826
In Stock
$ 7.13 USD
Free Shipping on orders $49 and up
Fits left and right side


Front Axle COLLAR NUT 31211128336
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:12519
Part#: 31211128336
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
COLLAR NUT:319500
High Temperature CV Joint Grease - 120g Tube
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:26438189
Part#: G000633
In Stock
$ 11.99

This product was last offered at the strikethrough price on
04-15-2026

$ 8.15 USD
Free Shipping on orders $49 and up
$ 8.15 USD
Free Shipping on orders $49 and up
Febi Rear Axle Shaft Seal - E10, E30, E36, E83, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:586699
Part#: 33121212464
In Stock at Vendor
$ 8.99

This product was last offered at the strikethrough price on
05-22-2026

$ 7.99 USD
Free Shipping on orders $49 and up
$ 7.99 USD
Free Shipping on orders $49 and up
45x65x10

Febi Driveshaft Centering Sleeve
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382476
Part#: 26117526611
In Stock at Vendor
$ 23.99

This product was last offered at the strikethrough price on
07-15-2026

$ 14.99 USD
Free Shipping on orders $49 and up
$ 14.99 USD
Free Shipping on orders $49 and up
Located at the front of the drive shaft

Febi - Corporate Logo
T#:382472
Part#: 24311218570
Ships in 1 day
$ 6.11 USD
Free Shipping on orders $49 and up
Seals the transmission to the oil pan
SACHS Performance - Corporate Logo
T#:393878
Part#: 883082999731KT
Ships in 5 Business Days
$ 1,048.99 USD
Free Shipping
$ 1,048.99 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

  • Performance Throwout Bearing - Designed for increased spring pressure and higher RPM function

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

Sachs Performance Pressure Plate - E30 E28 E36 E34
2X Entries For Our G87 M2 Sweepstakes!
SACHS Performance - Corporate Logo
T#:393858
Part#: 883082999731
Ships in 5 Business Days
$ 555.00 USD
Free Shipping
$ 555.00 USD
Free Shipping

Experience longer life and less slippage with this Sachs Performance pressure plate for use with sport/racing clutch discs. This pressure plate offers more clamping power, and is recommended for cars making significantly more hp than stock (forced injection, etc) while using a stock flywheel. This is NOT for use on cars with an aftermarket flywheel (stock flywheel only).

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
Sachs Performance Organic Clutch Disc - E30 E36 E28 E34
2X Entries For Our G87 M2 Sweepstakes!
SACHS Performance - Corporate Logo
T#:393846
Part#: 881864999937
Ships in 5 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for both performance street and light to moderate track applications such as occasional endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

SACHS Performance - Corporate Logo
T#:393877
Part#: 883082999731KT1
Ships in 5 Business Days
$ 1,134.99 USD
Free Shipping
$ 1,134.99 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

  • Performance Throwout Bearing - Designed for increased spring pressure and higher RPM function

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

SACHS Performance - Corporate Logo
T#:393844
Part#: 881864999936
Ships in 5 Business Days
$ 465.99 USD
Free Shipping
$ 465.99 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for aggressive track applications such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
JB Racing - Corporate Logo
T#:5774217
Part#: 520-065-228
Ships on Aug 11, 2026
$ 630.00 USD
Free Shipping on orders $49 and up
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.
Show More Show Less
Febi - Corporate Logo
T#:382469
Part#: 24111217082
Ships on Oct 15, 2026
$ 12.99 USD
Free Shipping on orders $49 and up
Seal up your leaking oil pan


Febi Drain Plug Gasket
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:340702
Part#: 07119963355
Ships on Oct 6, 2026
$ 1.99 USD
Free Shipping on orders $49 and up
22x27 aluminum sealing ring
Febi Synthetic Gear Oil - GL-5 75w90 - 1 Liter
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:38419098
Part#: G052145A1
Special Order: No Guaranteed ETA
$ 22.99 USD
Free Shipping on orders $49 and up
The transmission is one of the vehicle’s most vital components, with numerous finely engineered precision parts making it one of the most complex and expensive units to repair or replace. Using the correct oil and replacing it at the correct time is key to preventing transmission problems such as ‘shudder’, gear stiffness, and axle whining. Damaging components before these issues occur can result in possible premature and expensive transmission failure. Only the right oil can guarantee the safe functioning of the transmission in the vehicle. High-quality transmission oils from febi are therefore precisely matched to the special requirements of vehicle manufacturers.
Show More Show Less